COSYLAND CS0082-1-US Kitchen Standing Tower Installation Guide

COSYLAND CS0082-1-US Kitchen Standing Tower

Specifications:

• Intended Age Group: 18 months to 3 years old
• Material: Bamboo
• Cleaning Instructions: Mild soap and water or a damp cloth

Product Usage Instructions

Assembly Guidelines:

Follow the steps below to assemble the Cosyland Kitchen Standing

Tower:

Step 1:

Assemble parts 1, 2, 3, and 4 using six A screws and an L-shaped hex wrench.

Step 2:

Secure part 7 using four A screws and then attach parts 8 using six B screws. Use a Phillips screwdriver for the B screws.

Step 3:

Attach part 10 to part 11 using three B screws and a Phillips screwdriver.

Step 4:

Use 4 C bolts to attach parts 12 to 13 and parts 14 to 15.

Step 5:

Connect parts 5, 6, and 9 with the assembly from step two, and parts 12 and 13 from step four.

Step 6:

Fix part 11 onto the assembly completed in step five using one A screw.

Step 7:

Secure parts 14 and 15 onto the assembly from step six using seven A screws.

Maintenance:

To maintain the product, clean with mild soap and water or a damp cloth. Regularly inspect and tighten screws and bolts.

Product Usage:

Always place the product on a flat surface. Do not leave children unsupervised. Dispose of plastic bags before use. Ensure all parts are correctly installed to prevent injury.

FAQ

• Q: Can I use electric power tools for assembly?
  • A: It is recommended to avoid electric power tools as they may cause bamboo splitting.
• Q: What age group is this product suitable for?
  • A: The product is intended for children aged between 18 months to 3 years old.

Warning:

1. Take note of all safety precautions and assembly requirements.
2. Store the manual in a secure location for future reference.
3. Only adults should perform the assembly process.
4. Properly follow the instructions to assemble the product correctly.
5. Keep the packaging away from children to prevent accidents.
6. Do not let children handle the product if it is separated to avoid incidents such as swallowing and suffocation.
7. Regularly inspect if the product is securely assembled.
8. It is essential to carefully read this manual before starting the assembly and use of the product.
9. Refrain from using electric power tools as it may result in the bamboo splitting.
10. Children must not be left unsupervised without an adult.
11. Dispose of all plastic bags and packing materials before using the product.
12. This product is intended for children aged 18 months to 3 years old.
13. Always place the product on a flat surface. Do not put it on an uneven surface with a child inside.
14. Ensure that all parts are correctly installed to prevent injury.

Maintenance Guidelines

To keep the product in good condition, please use only mild soap and water or a damp cloth when wiping it clean. Avoid using any harsh cleaning abrasives, as they can scratch the surface and damage the protective coating.

Product Upkeep:

Regular inspection of the product is essential, and we recommend doing so at least once a week. Please ensure that all screws and bolts are securely tightened before use.

List of Components and Hardwar

Assembly Guidelines

Step 1:

You will need parts 1, 2, 3, and 4, as well as six A screws and an L-shaped hex wrench. Use parts 4 and 3 to assemble part 1 first, then with part 2 together, and tighten the A screws using the L-shaped hex wrench.

Step 2:

You will need part 7, two-part 8, four A screws, six B screws, an L-shaped wrench, and a Phillips screwdriver.
First, use four A screws and the L-shaped wrench to secure part 7 to the assembly from Step 1.
Next, use six B screws and the Phillips screwdriver to attach the two part 8 to part 7. Insert screw B into the slot of part 8， and align them with the corresponding holes on part 7 before tightening the screws.

Note: Please follow the steps in order. If you attach the part 8 first, it will make attaching part 7 difficult.

Step 3:

You will need part number 10, part number 11, three B screws, and a Phillips screwdriver. Attach part number 10 to part number 11 using the 3 B screws.
Insert screw B into the slot of part 10，align them with the corresponding holes on part 11 before tightening the screws.

Step 4:

You will need parts 12, 13, 14, 15, and 4 C bolts as well as an L-shaped wrench.

Use 2 C bolts to attach part 12 to part 13.
Use 2 C bolts to attach part 14 to part 15.

Notice: You can determine the inner and outer sides of the panels during installation by using the punched holes as a reference.

Step 5:

You need parts 5, 6, and 9, as well as the parts completed in step two, and parts 12 and 13 that were already fixed in step four, and an L-shaped wrench. First, use four A screws to connect parts 6, 5, and 9 with parts 12 and 13. Then, fix parts 12 and 13 onto the item completed in step two.

Step 6:

You need part 11 and the item completed in step five, one A screw, and an L-shaped wrench.
Use the A screw to fix part 11 onto the item completed in step five.

Step 7:

You need parts 14 and 15, which were fixed in Step 4, the piece completed in Step 6, and seven A screws along with an L-shaped wrench
Use seven A screws to secure parts 14 and 15 onto the piece completed in Step 6.

Step 8:

Congratulations, you are almost done! At this point, all you need to do is to confirm if you need the anti-fall bar. If you do, you will need one part 16 and 2 parts D.
Use 2 parts D to fix part 16 onto the main body of the product. Now, please enjoy your happy time with your child!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>