Kraemer KR-BIS IVI Head Unit 9.7 Inch Screen Mead Box Bentley Instruction Manual

KR-BIS
IVI Head Unit, 9.7″ Screen, Media Box
Bentley Infotainment System (BIS) INSTRUCTION MANUAL

Safety Precautions

Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. Please keep this manual in a safe place for future reference.
Only connect the unit to a 12-volt power supply with negative grounding.Never install this unit where operating it may impair safe driving conditions. Never expose this unit, amplifier or speakers to moisture or water to prevent electric sparks or fire.Do not change the fuse on the power cord without professional guidance. Using an improper fuse may cause damage to this unit or even cause fire.Please contact your nearest dealer if one of the following is experienced:(a). Water or other objects enter the unit.
(b). There is smoke.
(c). Peculiar smell.
To ensure safe driving, please adjust the volume to a safe and comfortable level in case of emergency situations.

Safety Precautions

1. Never disassemble or adjust the unit without professional guidance.
   For further details, please consult an authorised service provider or dealer.

2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to clean. Using a rough cloth and non-neutral detergent such as alcohol to clean may scratch or discolour the monitor.

3. If the unit does not function normally , please refer to the troubleshooting guide of this manual.
   If no relevant information is found, please contact your dealer or Service Center.

4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit.

5. Using the car heater in a low temperature environment may result in moisture collecting inside the unit. DO NOT use the unit in this condition. Eject the disc and wipe off the moisture on the disc. If the unit does not work after a few hours, please contact  the service center.

6. Do not drop or bang the LCD monitor as this will damage it.

7. To prevent damage to the screen, avoid touching it with sharp objects.

8. Graphic illustrations are used to provide a clear demonstration and an easy way to understand how to operate this unit.

9. Only operate the unit as described in this manual. Inappropriate operation will void the guarantee.

Basic Operation

Front Panel

1. POWER button
   Switch on/off device

2. HOME/Voice Control button
   Call up main menu
   Activate voice control

3. Airconditioner buttons

4. Navigation shortcut button

5. BACK button
   Return to previous menu

6. Rotary-knob

7. Touch screen

Power On / Off
Press the [ ] knob on the bottom left of the unit. The unit starts and the current mode status appears in the LCD.
Press and hold the [ ] knob to power off the unit.
Volume Adjustment
To increase or decrease the volume level, rotate the [ ] knob on the front panel.
Mute
Press [ ] button to mute the volume from the unit. Press again to restore the volume.
Adjusting the volume or using any of the audio setup features cancels the mute function.
Playing Source Selection
Press the [ ] button on the front panel to enter main menu. The playing modes are displayed on the screen.

1. Enter Main Menu (in playing mode)

2. Source List
   Touch a icon to select corresponding mode.
   Flip left to show more icons.

3. Status Bar

4. Clock

5. Enter Radio Menu

6. Enter Media Menu

7. Enter Phone Menu

8. Enter Navigation Menu

9. Enter Sound Menu

10. Aircondition

Troubleshooting

What appears to be trouble is not always serious. Please check the following points before calling a service center.

correct.
Volume set too low.| Increase volume level.
Speakers damaged.| Replace speakers.
Heavily biased volume balance.| Adjust the channel balance to center position.
Speaker wiring is in contact with metal part of car.| Insulate all speaker wiring connections.
Poor sound quality or distortion| Speaker power rating does not match unit.| Replace speakers.
Wrong connections.| Check wiring and correct.
Speaker is shorted.| Check wiring and correct.
Unit resets itself when engine is off| Incorrect connection between ACC and BATT.| Check wiring and correct.

Specification

Reference Supply Voltage ………………………………………………………… 12V(DC)
Operating Voltage Range …………………………………………………….. 9 – 16V(DC)
Max Operating Current …………………………………………………………………….15A
Screen Size ………………………………………………………………………………9.7 inch
Operating Temperature……………………………………………………..-20°C ~ +60°C
Storing Temperature ……………………………………………………….. -30°C ~ +80°C
Operating Humidity …………………………………………………………… 45%~80%RH
Storing Humidity……………………………………………………………….. 30%~90%RH

5150 to 5250 MHz
5725 to 5825 MHz
GNSS| 1559 to 1610 MHz
Broadcast Sound Receivers| AM(According to Market) Receiver Only:
Ox0=EU — range: 531 KHz-1602; step: 9KHz
Ox1=NAFTA — range: 530KHz-1710; step: 10KHz
0x2=ROW — range: 531 KHz-1602; step: 9KHz
| FM: 87.5 to 108 MHz (Receiver Only)
| DAB: 174MHz – 240MHz (Receiver Only)

Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

| BE| EL| LT| PT| BG| ES| LU| RO| CZ| FR
---|---|---|---|---|---|---|---|---|---|---
HU| SI| DK| HR| MT| SK| DE| IT| NL| Fl
EE| CY| AT| SE| IE| LV| PL| UK| |

Operations in the 5.15-5.25GHz band are restricted to vehicle usage only.

The frequency band 5725-5850MHz is not used in Japan

Wire Connections

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EU Declaration of Conformity
http://www.kraemer-automotive.com/. hereby declares that this product Bentley Infotainment System(BIS) KR-BIS is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

ISED Statement
IC: 20577-KRBIS
Model name: KR-BIS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This radio transmitter has been approved by Industry Canada to operate with theantenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with thisdevice.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Caution:
The device for operation in the band 5150–5250 MHz is only for vehicle use to reduce the potential for harmful interference to co-channel mobile satellite systems;

KRÄMER AUTOMOTIVE SYSTEMS GMBH
Obere Wässere 6-8 72764 Reutlingen Germany

References

• Home - Krämer Automotive Systems GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>