ORTEGA 2BHEA-PTWO Acoustic Amplifier User Manual

ORTEGA 2BHEA-PTWO Acoustic Amplifier

Specifications:

• Model: Ptwo ERP:A07-006-044
• Dimensions: 297 x 210 mm
• Weight: 128 grams

Product Usage Instructions

Installation:

1. Ensure the equipment is placed on a stable surface.
2. Maintain a minimum distance of 20cm between the equipment and any radiators.
3. Connect the necessary cables as per the user manual.

Operation:

1. Power on the equipment using the designated power button.
2. Follow the on-screen instructions for setup and configuration.
3. Use the equipment as intended with care and attention to safety guidelines.

Maintenance:

1. Regularly clean the equipment using a soft, dry cloth to prevent dust build-up.
2. Avoid exposing the equipment to extreme temperatures or moisture.
3. Refer to the user manual for troubleshooting tips and maintenance recommendations.

Frequently Asked Questions (FAQ):

1. Q: What should I do if the equipment stops working suddenly?
   A: First, check the power source and connections. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support for assistance.

2. Q: Can I use the equipment without following the minimum distance requirement?
   A: It is recommended to maintain a minimum distance of 20cm between the equipment and any radiators to ensure proper ventilation and safe operation. Failure to do so may result in overheating or other operational issues.

The Ptwo, designed especially for acoustic guitars, offers lightweight and portable characteristics, making it suitable for indoor use and easy transportation outdoors. For correct and safe operation, please read this safety notice carefully. The built in headphone output allows you to practice anytime and anywhere without disturbing those around you.

BLUETOOTH INFORMATION

• Version: Bluetooth 5.0
• Frequency Range: 2.402 GHz – 2.480 GHz
• Communication Distance: Straight line ≥ 10 m
• Support System: Android/ IOS/Windows
• Transmission Power: Class 2 max. 4 dBm
• Pairing Name: ORTEGA PTWO

BATTERY INFORMATION

• Type: 2 x Series 18650 rechargeable (w/ protection board)
• Rated Voltage: 7.4 V
• Nominal Capacity: 2000 mAh
• Rechargeable Cycles: > 500 times
• Battery Charge Time: 2.5 hours
• Continuous Use: Up to 4-5 hours (when fully charged and at 60% output volume). When the indicator light dims, the speaker can only continue to operate for less than 30 minutes.

Note: If the product is not used for an extended period, it is recommended to periodically charge and discharge it to maintain battery health.

PRECAUTIONS FOR USING THE BATTERY

1. Charge the device full before initial use to prevent overcharging the battery. Best option is daytime charging for the first charge, as it’s easier to inadvertently overcharge the battery during nighttime charging, potentially causing damage.
2. It is advisable to charge the device during the daytime for better monitoring and control, reducing the risk of overcharging and potential battery damage.
3. It is crucial not to exceed 8 hours of continuous charging, as overcharging can significantly decrease the battery’s lifespan and may damage the circuitry.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

FUNCTION INTRODUCTION

1. BASS
   Adjust the lower frequency of the instrument.

2. TREBLE
   Adjust the higher frequency of the instrument.

3. REVERB
   Select the reverb effect: in the left section for ROMM effect, in the right section for HALL effect.

4. MODULATION/ DELAY
   Select the sound processing effect: in the left section for CHORUS effect, in the right section for DELAY effect.

5. MASTER
   Adjust output volume.

6. BLUETOOTH INDICATOR LIGHT
   When not paired, the indicator light flashes blue; when paired, stays permanently blue.

7. POWER
   Power On/Off: Press the main switch for 2 seconds to turn on/off the Ptwo. The green light indicates power status. A slow-blinking blue light signals a low battery.
   Bluetooth Activation: Press the power button to activate Bluetooth; the Bluetooth indicator (6) will flash. Once paired successfully, the indicator remains on. Press the power button again to deactivate Bluetooth; the indicator turns off.
   Bluetooth Audio Connection: Activate Bluetooth on your mobile phone to pair with the speaker for audio playback. Adjust audio volume using the main volume control; other controls do not affect Bluetooth audio.

8. CHARGING INDICATOR LIGHT
   During charging, the light is green. Once the battery is fully charged, the indicator light turns off.

9. CHARGING PORT
   The DC 5V input port is powered by a 5V 2A charging adapter (USB-C connector).
   A USB Type-A to Type-C cable is included for charging.

10. AUX IN
    3,5 mm (1/8″) input for external audio source

11. AUX OUT
    ”3,5 mm (1/8″) headphone output

12. INPUT
    6,3 mm (1/4″) INSTRUMENT INPUT
    (AUX and Bluetooth functions do not support simultaneous use)

SAFETY INSTRUCTIONS & WARNING
While charging or during normal operation, slight heating of the Ptwo is normal. When cleaning, ensure the power supply is turned off and all external sources are disconnected. Use an antistatic cloth for cleaning; avoid harsh chemicals, detergents, or abrasives. Keep the product dry and refrain from using it in excessively humid environments. Only use ORTEGA-approved accessories. Unauthorized disassembly voids the warranty. For safe usage, carefully review this safety notice. Turn off the power supply if safety risks arise or if interference with other electronic devices occurs in areas where radio equipment usage is prohibited. Avoid usage in areas marked for flammable or explosive materials. In such areas, ensure the power supply is turned off. Never expose the Ptwo to fire, as it may cause explosion.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>