coolpad C15 Smartphone Owner’s Manual

C15

1. Receiver
2. Front camera
3. Volume key
4. Fingerprint
5. Power key
6. Back key
7. Home key
8. Recent apps key USB port

Functions of Main Keys

Power key:| Press and hold to turn your phone on. When the phone is on, press to turn on or lock the screen. Press and hold to wake the Google Assistant. Press
the Power key and the Volume Up key simultaneously to display the device options menu, and tap Power off to turn your phone off, or tap Restart to
restart your phone. Press and hold the Power key for over 8 seconds to forcefully restart it.
---|---
Recent apps:| Tap to open the list of recent apps.
Home:| Tap to return to the Home screen.
Back:| Tap to return to the previous screen.
Volume:| Press to adjust the phone volume, including call volume, ringtone volume, music volume and video volume.

Installing SIM Card and memory card

Please insert a Nano SIM card on the Slot], a Nano SIM card or a micro SD card on the Slot 2.
Please use SIM card supplied by your service provider. Please do not use SIM card adapters, cut up cards or destroyed cards.

Technical Data

In- Box Contents

Safety Information

Avoid hearing damage: Permanent hearing loss may occur if earphones or headset are used at high volume for prolonged periods of time. To reduce the risk, reduce volume to a safe and comfortable level.
Traffic security: Full attention must be given to driving at all times in order to reduce the risk of an accident.
Interference with medical equipment: This device may cause medical equipment to malfunction. Do not use your device where prohibited.
Battery: WARNING! There is a risk of explosion if battery is replaced with an incorrect type. Do not attempt to open, crush, puncture, short circuit, dispose of in fire or water, or expose battery to temperature higher than 40°C. Dispose of used batteries according to the local regulations.
Battery replacement: You should only use Manufacturer Authentic Accessories, as the use of any other accessories may damage your phone and may be dangerous, and will make all guarantees for your phone null and void. Adapter shall be installed near the equipment and shall be easily accessible.
Operating temperature of the device is 0 to 40°C. Avoid dusty, damp, dirty environments or magnetic fields. Protect from rain and moisture. Keep the device away from direct sunlight for prolonged periods, extreme heat/cold, fire, microwave or high pressure containers. These may damage your device or accessories.

Considerations for Sending the Mobile Phone for Repair and Taking it Back

1. The customer shall complete the “Repair Worksheet” as required, the handwriting shall be clear, and the information given (name, address, telephone number and fault symptoms) shall be valid.
2. Before sending your mobile phone for repair, back up the important information (for instance, telephone number) stored in your mobile phone first to avoid loss or leakage.
3. The customer presents the user copy of the “Repair Takeover Form” to take its mobile phone back and in the meanwhile requests the repair shop to provide the “Repair Worksheet” . If the customer loses the “User Copy” , the customer shall provide its ID card or valid identify proof to go through the reporting of loss procedures before the mobile phone can be taken back within 7 days.
4. Incase of payment by cheque, please take the mobile phone back after the funds have arrived at the account of the service shop.

List of Functional Faults Covered by Replacement and Warranty Servic

screen, wrong character, missing flick, inability to boot up, inability to log into the network or communicate, no ringtone/dialing error/abnormal shut-down, SIM card poor contact, invalid button control, no sound, one-way audio or abnormal volume and outer shell breakage as a result of structural or material reasons.
Battery| After charging, the mobile phone still can not work properly. The judgment standard is that the battery capacity is no less than 80%.
USB cable| Can not work normally.

Coolpad Warranty Card

Customer Information
Customer Name:
Postal Code:
Customer Address;
Contact No.:
Product Information
Model/Color/IMEI;
Battery Model;
Charger Model;
Purchase Information
Retailer Name:
Retailer Contact No:
Retailer Address:
Purchase Date:
Receipt No.: a

Federal Communication Commission Interference Statement

FCC ID: R38YLCP32A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions (10mm) accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

Quick Start Guide
C15
Website: www.coolpad.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>