iiyama MD-CAR2031-B1 Double Column Electric Floor Lift Instruction Manual
- July 26, 2024
- iiyama
Table of Contents
iiyama MD-CAR2031-B1 Double Column Electric Floor Lift Instruction Manual
Safety information
Installation
5mm | 1pcs | a | |
---|---|---|---|
0 13 | 5pcs | b | |
M6 x45 | 9pcs | C | |
M6 x12 | 11pcs | d | |
M8 x 25 | 5pcs | e | |
M4 x 6 | 3pcs | f | |
Cable Clip | 6pcs | g |
-
-
-
-
-
-
- Lock the screws
-
-
-
-
-
For using this product propped and safely, please follow the contents of the Installation and Operation Manual to install. It is suggested that this stand applies to 55-105 Large Format Display L Landscape mode, to install the e Display on this slant in Portrait mode, please aware of the Disc by Width dimension DOI NOT exceed 850mm to avoid the interference between the Display and Stand base to cause the product damages and ensure safety operation, Use with other equipment may result in instability causing injury. This stand can carry a maximum weight of 120KG, maximum VESA mounting 800 x 600mm
Important safety information for both installer and user
Installer:
Before starting the installation, read the safety information and the rest of
this product manual carefully. Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury, damage to
equipment!
User:
Please carefully to read the safety information and user manual (if included)
before using the product to ensure a failure-free working unit and avoid
accidents.
Electrical Safety
Connect the unit to a properly grounded outlet only. Make sure the unit can be
Immediately separated from the power outlet,
Only use the unit in dry rooms, protect it from water and other liquids. Clean
the unit with dry cloth only.
Do not open lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable parts
inside. In case of dysfunction, unplug the unit from power outlet and contact
an authorised technical service person.
Do not overuse the cable(s) or damage it in any other ways. Replace damaged
cable(s) immediately with new identical cable(s).
The socket-outlet shall be easily accessible when a power cable used as
disconnect device.
Disconnect power cable from power outlet before moving the product.
The unit does not have dripping or splashing protection. Do not place any
liquid objects on or spray the unit.
To reduce the risk of electric shock, always unplug the power from the power
outlet before deaning.
Mechanical Safety
Always keep product’s moving path free from obstacles.
Before moving the unit up or down, assure at least 20 cm/ 7.9 inch safety
distance from any part of the unit to any other
elements in order to avoid shear traps or squeezing points.
In case of accident, please stop the operating immediately.
Only operate the unit with wheels on plane and stable floors. Move the unit on plane floors only.
Risk of biting when overrunning door sills, uneven floor and similar.
Severe risk of injury when unit tips over, Always move the product with the
display in the lowest position,
Do not push the Electric Stand from front or back of lift.
Do not move the Electric Stand by pushing on Display.
Hazardous moving parts keep fingers and other body parts away.
Exceeding the weight capacity can result in serious personal injury or damage
to equipment, It is the installer’s responsibility to make sure the total
weight include accessories does not exceed the maximum load of 265 lbs/120 kg.
Use with heavier screens may result in instability causing tip over and
resulting in death or serious injury. The height adjustable feature will not
function properly if the total weight exceeds the given maximum load. The
installation, maintenance and un-installation of the product should be handled
by trained professional and skilled personnel.
The Intended Use Of The Product:
The product is intended to be used for the mounting and height adjustment of
Large Format Display. The product is intended for in-door usage in dass rooms,
offices or meeting rooms at temperature between 0 to 40 °C. Please make sure
indoor environment is dry and cool. Normal operating humidity is 10%~90%RH. Do
not use this product in out-door environment.
The product is intended to use by adults; children under the age of 16 should
only use the product under adul supervision, Duty cycle 2 min.on/ 18 min off.
The Electric Stand motors are intended for intermittent use, continuous or
extended use (more than 2 minutes) will cause over heating and safety system
will switch the motors off, if motors overheating occurred, please cool down
the motors at least 18 minutes before re-operating. The system will
automatically switch back to normal when the motors have cooled down.
Anti-collision Function: the product will be stopped and moved up 50mm
automatically when detected obstacle/jitter during descending operation, in
opposite of the ascending operation, the product will be stopped automatically
when detected obstade/jitter.
*MD-CAR2031-81
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>