Tipmant 777-618 RC Chameleon Lizard Pet 2.4G Smart Simulation Animal Robot Kids Instruction Manual
- July 26, 2024
- Tipmant
Table of Contents
- 777-618 RC Chameleon Lizard Pet 2.4G Smart Simulation Animal Robot Kids
- Specifications:
- Product Usage Instructions:
- Inserting Batteries:
- Powering On and Off:
- Charging the Toy:
- Q: What type of batteries does the remote control use?
- Q: Can children under 3 years old play with this toy?
- Q: How do I turn off the sound effects of the toy?
777-618 RC Chameleon Lizard Pet 2.4G Smart Simulation Animal Robot Kids
“`html
Specifications:
- Power Supply Type: DC
- Built-In Command Display Light
- Rechargeable Animal Toy
- Power Rating: DC3.7V 7W
- Voltage: 5V A
- Type C USB Charging Cable Included
Product Usage Instructions:
Inserting Batteries:
Ensure to use a new alkaline battery for optimal performance.
Open the remote control and insert the battery according to the
polarity markings.
Powering On and Off:
Use the power switch to turn the remote control on. Keep hands,
hair, and loose clothing away from moving parts. To turn off sound
effects, press and hold the demo button for 3 seconds.
Charging the Toy:
Connect the Type C charging cable to the toy and use a power
adapter with the correct specifications (not included). Follow
charging precautions to avoid damaging the battery.
FAQ:
Q: What type of batteries does the remote control use?
A: It is recommended to use new alkaline batteries for optimal
manipulation effects.
Q: Can children under 3 years old play with this toy?
A: No, this toy contains small parts and is not suitable for
children under 3 years old.
Q: How do I turn off the sound effects of the toy?
A: Press and hold the demo button for 3 seconds to turn off the
sound effects while the toy is dancing.
“`
2.4G REMOTE CONTROL
OF REPTILES
Ages 3 +
L 43
It is SUested that the remote
control-use a new alkaline batterv
‘ . ‘ . . . to achieve the best manioulatioii . . . – effect
II r. ( ,l l!;l (fl rl 1 F-l’i, ;v
I 1 -l’i,° N h l -l’i,74 J d JJ -l’i,O l
J
It contains small parts, not suitable for children under 3
– /1
years old. The eackage contains importalrmation, Please keep it. The picture
of the outer packaging product
is different from the object, Please refer to the physical
WARNING ect accordingly.
N te: Discard the t
recycle it pr perly.
·v at will
which ma·v a-l’i,ect the environment. Please
warn:
· This remote control cannot use two AAA batteries above 1.5V · Toy belly
packing battery can only be charged in the battery compartment, · Do not
detachable charge, do not load into other models of battery charge. · Non-
rechargeable batteries are not rechargeable. · Different types of batteries or
old and new batteries can not be mixed
together. · Only the same or recommended batteries can be used. · The remote
control-exhausted battery should be emoved from the toy. · Battery end shall
not short circuit. · Toy rechargeable batteries can only be charged under
adult supervision
Maintenance and maintenance:
· If the product is not used for a long time,Need take out the battery · Clean
this product with a clean, soft cloth · void exosing toys to the sun or heat ·
Do not immerse the toy in the water, Instant clean up of the dirt fom the
wheels Or linear matter, avoid aecting the play experience Operating
temperature is 0-40°(.
The n rmal functi n of the product may be a-l’i,ected by strong magnetic
fields, electrostatic environment may cause interference r failure, y u can
refer t the instructions rec mmended reset settings, if y u can n t s Ive the
pr blem, please ch se an ther place t play. Keep the manual f r future
reference, and strictly f llow the instructi ns t use
this pr duct.
Srecautions:
When turning on the power switch, keep you hands, hai thead shaped fabric, and
loose clothing away from the toy legs. Don’t pick up the moving toys.
p wer supply type: DC = Rated
p we DC3V 0.5W Battery Requirements: 2 grains 1.5 V-l’i,SA (not include)
Operating temperature: 0-40°C
BUILT-IN COMMAND DISPL A Y LIGHT
SIT DOWN
-l’i,b
DEMO BUTTON
(Press and hold fo 3 seconds to turn o-l’i, the sound.)
When pressed, it will start dancing with the sound and lights.
ANIMAL TOY RECHA RGE ABLE
Power switch
Type C charging cable
Power adapter (not include)
· The built-in cylindrical battery can only be charged in the toy’s battery
compartment, and the head of the toy has a charging indicator light.
· The toy head Tepy-c socket connects the charging cable and the power adapter
into the socket for charging. The charging indicator light is on for the
charging process, it is in charging operation.
· Full of electricity, automatically stop charging, the indicator light is o
unplug the charging plug, charging is complete.
· The built-in battery is a 400 mAh 3.7 V rechargeable battery. Charging takes
about 2 hours or so.
· Each full charge, the toy runs for 50 70 minutes.
Charging precauti ns
· Do not put the live battery in a place with high temperature heating, open
fire and electric heating device. Di-l’i,¡erent types of batteries cannot be
installed fo chaging thewise it will cause damage or explosion
· Never hit or knock the battey against a hard suface. Never disassemble
the battery.
c · Do not immerse the battery in water, the battery should be stored in a dry
place, chaging temperature O 40 · No one should leave when charging
Rechargeable baery
Powersupply type: DC Rated power: DC3.7V 7W
E Voltage: SV A
Type C USB charging cable
Rated power: <2.SW
Warm reminder:
Before charging the battery
afterjust running this t y, wait 10-15 minutes for it to cI down to better
maintain battery pe-l’i,Äormance
GAME CONTROL
1.This p oduct is a 2.4GHz remote control, n o operation for 6 minutes,themain body and the emotecontrolwill automatically Built-in
u -l’i,½
shut down. When you use it again, the main body reboot and ccmmand displlight
press any key of the remote controlto conn ect to the frequency
successful then you can use
2.Controlthe emote contI, pss any command key when the
remotecontrolpanel has a flashinglight.
3.The effective distance ofthe remote controlis about 10meters, 5
meterswithin the distance of the remote control isbetterin the
environment of the sign al sent to have interference with the
distance difference.
S INGLE-BUTTON COMMAND MANIPULATI N
ARD
BACKWAR
-l’i,Ø Q
GET , E,owN
c COMBINATI ON M TI ON NTROL
t nd …
: On th1 e remote C positn, then “l
ntrol, first press T’ ap and pss Lie
Jl “Sit to reach
Down” to reach a
a sitting stadin
position on tiptoes.
Turn left and right n tipt es
f .-l’i,·
The operation
tL
stepsare
to
stand
on
tiptoes’
and
then
press
-l’i, rotation of the tiptoes.
-l’i,ä¢T ipt e sl w int the operati n steps
$ To stand on tiptoe posture, and then press the
slow int” to realize the tiptoe slow into the action
FCC Compliance Statements This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>