JBC F Series Fume Extractor Instruction Manual
- July 27, 2024
- JBC
Table of Contents
JBC F Series Fume Extractor
This manual corresponds to the following references:
- F3450 for T210, tube ø 4 mm
- F3449 for T245, tube ø 4 mm
- F3435 for T245, tube ø 6 mm
- F6457 for T470, tube ø 6 mm
Packing list
The following items are included:
- Fume Extractor ………………………………….. 1 unit
- Cleaning Brush …………………………………… 1 unit
According to purchased reference.
- Manual ……………………………………………………………………………………………………………………………………… 1 unit
- Ref. 0031932
Features
Fume Extractors for Tools are used to extract the smoke produced during soldering near the soldering tip. An extraction pump with filter is required. According to purchased reference, they are designed to be used with JBC soldering tools: T245, T210 and T470 Handles. Depending on the reference, they come with different tube diameters:
Compatibility
| Fume Extractor | F3435 | F3449 | F3450 | F6457 |
|---|---|---|---|---|
| Ø Tube (mm) | 6 | 4 | 4 | 6 |
| T245 Handles | **** | |||
| T470 Handles | ||||
| T210 Handles |
Assembly
For T210 Handles
Place the clamp directly on the handle (1) and slide it forward or backward
(2) until the opening of the extractor nozzle is placed near the tip of the
cartridge (3).
**For T245 & T470 Handles ***
Thread the cable into the clamp (1) and slide the clamp onto the handle (2)
until the opening of the extractor nozzle is placed near the tip of the
cartridge (3).
Specifications
F3450, F3435, F3449, F6457 Fume Extractors for T210, T245 & T470
Ref.: F3450, F3435, F3449, F6457
- Package Dimensions: 245 x 185 x 45 mm / 9.65 x 7.28 x 1.77 in (L x W x H)
F3450 for T210
- Tube Length : 2.1 m / 82.68 in
- Total Net Weight : 54 g / 0.120 lb
- Package Weight: 124 g / 0.273 lb
F3435 for T245
- Tube Length : 2.1 m / 82.68 in
- Total Net Weight : 97 g / 0.214 lb
- Package Dimensions / Weight : 167 g / 0.381 lb
F3449 for T245
- Tube Length : 2.1 m / 82.68 in
- Total Net Weight : 59 g / 0.130 lb
- Package Dimensions / Weight : 127 g / 0.280 lb
F6457 for T470
- Tube Length: 3.6 m / 141.73 in
- Total Net Weight : 138 g / 0.304 lb
- Package Dimensions / Weight : 206 g / 0.454 lb
Complies with CE standards.
Warranty
JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. The warranty does not cover product wear or misuse. For the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. By the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
FAQ
Q: What tools are compatible with these Fume Extractors?
A: The Fume Extractors are designed to be used with JBC soldering tools:
T245, T210, and T470 Handles.
Q: What should I do if my Fume Extractor is not working properly?
A: Please refer to the warranty information provided in the manual for
instructions on returning the equipment for repair if covered under warranty.
Q: How should I dispose of this product?
A: Do not throw the product in the garbage. Follow European directive
2012/19/EU and return electronic equipment at the end of its life to an
authorized recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>