Liberty DL-EDHDMGR 18G HDMI EDID and HDCP Manager User Manual

: July 27, 2024
: LIBERTY

Table of Contents

Liberty DL-EDHDMGR 18G HDMI EDID and HDCP Manager
Product Information
Product Usage Instructions
Product Introduction
Feature
Package Content
Specification
Panel Description
System Connection
EDID&HDCP management
Firmware Upgrade
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Liberty DL-EDHDMGR 18G HDMI EDID and HDCP Manager

Product Information

Video Input: HDMI 2.0
Input Connector: Female type-A
Input Resolution: 4K@60 4:4:4
Video Output: HDMI 2.0
Output Connector: Female type-A
Output Resolution: 4K@60 4:4:4
General: 18Gbps bandwidth
Power Supply: 5V 1A
Power Consumption: 2.4W (MAX)
Dimension (WHD): 54x18x60mm
Net Weight: 85g
Country of Origin: Taiwan

Product Usage Instructions

Panel Description
- Power LED: Indicates green when powered on.
- HDMI IN: Connects to the video source.
- DIP Switch: Used for EDID and HDCP management.
- USB-C: Powers the device and is used for firmware upgrades.
- CEC Switch: Turns CEC on/off.
- HDMI OUT: Connects to the display.
System Connection
To set up the device, follow the steps mentioned in the user manual, including connecting the HDMI input/output and powering the device using USB-C.
EDID & HDCP Management
The device supports predefined and user-defined EDID settings. Follow the instructions in the user manual to upload EDID files successfully. For HDCP management, refer to the switch status and functions described in the manual.
Firmware Upgrade
To upgrade the firmware, rename the upgrade file as per the specified format and follow the steps outlined in the user manual for a successful upgrade process.

Frequently Asked Questions (FAQ)

Q: How can I check if the EDID upload is successful?
A: After copying the EDID file into the U-disk, open it. If you find a SUCCESS.TXT file, it indicates a successful EDID upload.
Q: What does the Power LED indicate?
A: The Power LED turns green when the device is powered on.

Product Introduction

The DL-EDHDMGR is an 18G HDMI manager with EDID&HDCP management. It supports up to 4K@60 4:4:4 and HDCP2.2. The product is powered by HDMI or USB-C, and it contains a CEC block switch and supports auto-downscaling.

Feature

18G HDMI 2.0 4K@60 444 HDCP2.2;
Supports EDID & HDCP manage;
Power by HDMI or USB-C;
CEC block switch.

Package Content

1x DL-EDHDMGR
1x User Manual QR

Specification

Video Input

Country of Origin Taiwan

Panel Description

Power LED: The LED indicates green when power is on.
HDMI IN: HDMI2.0 input, connect to source.
DIP Switch: 4-pin dip switch for EDID and HDCP management.
USB-C: USB-C is used to power the device, upload EDID, and firmware upgrade.
CEC Switch: Turn on/off CEC
HDMI OUT: HDMI 2.0 output, connect to display.

System Connection

EDID&HDCP management

Predefined EDID Setting

User-defined EDID Setting

Rename the user-defined EDID according to the following format: 0803C000.DAT
Connect the device to the PC with a USB cable, the PC will automatically detect a U-disk named “BOOTDISK”.
Copy the EDID file into the U-disk, and then open the U-disk. If there is a SUCCESS. TXT file means that the EDID upload is successful.
Remove the USB cable, and connect the adapter to power the device.

HDCP management

Switch Status

|

HDCP Function

---|---
1| Shows an ID code to the Source that no HDCP is supported by the device, then the source will assume that no HDCP is supported by the device and will send the content without HDCP encryption if the signal format allows it.
0| Switch off HDCP management

Firmware Upgrade

Rename the upgrade file according to the following format: 08009000.APP
Disconnect the HDMI and connect the DL-EDHDMGR to the PC with a USB cable, the PC will detect a U-disk named “BOOTDISK”.
Copy the file into the U-disk, and then open the U-disk. If there is a SUCCESS.TXT file, it means an upgrade is successful, and if there is a UNKNOW.TXT file, it means fail.

Thank you for your purchase.
Please contact us with your questions and comments.