MySound ARHTVHS Wireless TV Headset User Guide
- July 26, 2024
- MySound
Table of Contents
MySound ARHTVHS Wireless TV Headset
Product Information
Specifications
- Model: ARHTVHS
- Package Contents:
- Wireless headset
- USB charging cable
- Charging: USB charging
- Indicator Light: Front of the headset
- Transmitter: Pairing button with AUX indicator light
Product Usage Instructions
Step 1: Charge the Headset
- Plug one end of the included charging cable into the charging jack on the left side of the headset.
- Plug the other end of the cable into a USB power source like a computer or USB power adapter (not included).
- The indicator light on the front of the headset will flash while charging.
Step 2: Pair the Headset with Your Transmitter
- Make sure the transmitter is on (solid blue indicator light). Press and hold the button if it’s off.
- Put on the headset and rotate the volume knob to turn it on. The headset will make a startup sound followed by a beep, indicating it’s in pairing mode.
- Press and hold the transmitter’s PAIR button to initiate pairing with your new headset.
- The AUX indicator light on the transmitter will start blinking.
- After a few moments, audio from your TV will play through your headphones. Ensure your TV is on and volume is up.
Frequently Asked Questions (FAQ)
-
Q: How do I know when the headset is fully charged?
A: The indicator light on the front of the headset will stop flashing and remain solid when fully charged. -
Q: What should I do if pairing is unsuccessful?
A: Make sure both the headset and transmitter are fully charged 1and within range for successful pairing. Try resetting both devices and repeating the pairing process.
Quick Start Guide
Want an easier setup?
Scan here for quick step-by-step video instructions
What’s in the package?
Step 1: Charge the headset
Plug one end of an included charging cable into the charging jack on the left
side of the headset.
Plug the other end into a USB power source (like a computer) or USB power
adapter (not included).
The indicator light on the front of the headset flashes while the headset is charging.
Step 2: Pair the new headset with your transmitter
-
Make sure the transmitter is on (its indicator light should be solid blue). Press and hold the button if the transmitter isn’t on.
-
Press and hold the transmitter’s PAIR button to start pairing with your new headset.
The AUX indicator light starts blinking on the transmitter’s front panel. -
Put the headset on and rotate its volume knob to turn it on. The headset makes its startup sound followed by a beep. This means it’s in pairing mode with the transmitter.
After a few moments, the audio from your TV will start playing through your headphones (make sure your TV is on and its volume is up).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>