Luminex GigaCore 10t 10 Gigabit Ethernet Switch User Manual
- July 26, 2024
- Luminex
Table of Contents
Preliminary
PRODUCT
**SPECIFICATIONS
**
APPLICATIONS
Gigabit Ethernet switch
The GigaCore 10t is a 10 Gigabit Ethernet switch for Professional touring
applications in lighting, audio and video with a frequent tear-down & built-up
requirement or for any other application where ruggedized connectivity is
necessary.
It is designed to support the most advanced AV protocols out of the box and is
the backbone for a converged network, allowing multiple applications to co-
exist on the same network.
The combination of GigaCore 10t and Araneo software platform is the ideal
solution to deploy an entire AV network in just a few clicks.
Each GigaCore switch can be configured by an intuitive built-in AV Web UI.
Araneo, the network monitoring, planning and management software will ensure
consistent management across the entire Luminex network.
The use of Araneo together with GigaCore switches will increase your
productivity and confidence in the network as well as significantly reduce
commissioning time.
An e-ink display informs the user about important parameters of the switch
also when the device is not powered.
GigaCore 10t is an indispensable part of any mobile AV network where
reliability and a quick and easy setup are needed.
As a user, you don’t need to make choices nor tradeoffs as GigaCore manages
most AV protocols for you out of the box: Pre-defined QoS/DiffServ (Quality of
Service) settings, optimized IGMP (Internet Group Management Protocol) per
group (VLAN) and pre-defined yet editable groups (VLANs) to easily separate
your network in different applications making converged networks obvious,
easy, and reliable.
Also included out of the box, is the advanced, automated redundancy protocol
RLinkX that ensures redundant links and supports a ring topology within your
GigaCore network.
Bandwidth, connectivity, and port availability are not an issue anymore with
the option of 2 x rugged fiber connection ports capable of data transfer
speeds of up to 10 Gbps and 8 x 1Gbps copper ports with rugged EtherCON
connectors that ensure robust connectivity.
Time synchronization is crucial in many applications; GigaCore 10t offers you
a hassle free PTPv2 enabled switch which will work for most major audio
protocols (e.g., AES67, ST2110, Dante, Q-sys/Q-lan, …) without the need for
making complicated configurations.
Furthermore AVB/MILAN is supported out of the box on the management group
(VLAN) and can operate simultaneously with the aforementioned PTPv2
applications in a converged network on different Groups (VLANS).
Entertainment and touring setups constantly push the limits. The deployment of
PoE powered devices is continuously increasing. GigaCore 10t is ahead of this
trend by offering PoE++ as an option on all copper ports (90W per port with a
total PoE budget of up to 450W.
Great care has been taken to ensure silent operation by means of intelligent
fan control, giving you more options with peace of mind that no live audience
or recording session would be disturbed.
GigaCore 10t is the ideal touring network solution offering rugged, out of the
box performance, #convergednetworkingmadeeasy and with its half 19” format it
is ideally suited to create a full A/B redundant AV network in a single rack
space.
Applications:
- Live events
- Touring
- Convention centers
- Large system integrations
- Sports arenas
- Broadcast and recording studios, OB vans
- Theme parks
- …
ORDERING INFORMATION 10GB
Product name:| Part numbers:
GigaCore 10t -10G-(Neutrik DUOMMF)| LU 01 00079-NDM-10G
GigaCore 10t -10G-(Neutrik DUOMMF + PoE++)| LU 01 00079-POE-NDM-10G
GigaCore 10t -10G-(NeutrikQUAD MMF)| LU 01 00079-NQM-10G
GigaCore 10t -10G-(NeutrikQUAD MMF + PoE++)| LU 01 00079-POE-NQM-10G
GigaCore 10t -10G-(NeutrikDUO SMF)| LU 01 00079-NDS-10G
GigaCore 10t-10G- (NeutrikDUO SMF + PoE++)| LU 01 00079-POE-NDS-10G
GigaCore 10t -10G-(NeutrikQUAD SMF)| LU 01 00079-NQS-10G
GigaCore 10t-10G- (NeutrikQUAD SMF + PoE++)| LU 01 00079-POE-NQS-10G
GigaCore 10t-10G- (Fiberfox 2ch MMF)| LU 01 00079-F2M-10G
GigaCore 10t-10G- (Fiberfox 2ch MMF)| LU 01 00079-POE-F2M-10G
GigaCore 10t-10G-(Fiberfox 4ch MMF)| LU 01 00079-F4M-10G
GigaCore 10t-10G-(Fiberfox 4ch MMF + PoE++)| LU 01 00079-POE-F4M-10G
ORDERING INFORMATION 1GB
Product name:| Part numbers:
GigaCore 10t -1G-(8 etherCON)| LU 01 00079-1G
GigaCore 10t -1G-(8 etherCON + PoE++)| LU 01 00079-POE-1G
GigaCore 10t -1G-(Neutrik DUOMMF)| LU 01 00079-NDM-1G
GigaCore 10t -1G-(Neutrik DUOMMF + PoE++)| LU 01 00079-POE-NDM-1G
GigaCore 10t -1G-(NeutrikQUAD MMF)| LU 01 00079-NQM-1G
GigaCore 10t -1G-(NeutrikQUAD MMF + PoE++)| LU 01 00079-POE-NQM-1G
GigaCore 10t -1G-(NeutrikDUO SMF)| LU 01 00079-NDS-1G
GigaCore 10t-1G- (NeutrikDUO SMF + PoE++)| LU 01 00079-POE-NDS-1G
GigaCore 10t -1G-(NeutrikQUAD SMF)| LU 01 00079-NQS-1G
GigaCore 10t-1G- (NeutrikQUAD SMF + PoE++)| LU 01 00079-POE-NQS-1G
GigaCore 10t-1G- (Fiberfox 2ch MMF)| LU 01 00079-F2M-1G
GigaCore 10t -1G-(Fiberfox 2ch MMF + PoE++)| LU 01 00079-POE-F2M-1G
GigaCore 10t-1G-(Fiberfox 4ch MMF)| LU 01 00079-F4M-1G
GigaCore 10t-1G-(Fiberfox 4ch MMF + PoE++)| LU 01 00079-POE-F4M-1G
APPLICATION DIAGRAM
TECHNICAL SPECIFICATIONS
MECHANICAL | GigaCore 10t |
---|---|
Enclosure | Robust all metal housing |
Dimensions (WxDxH) | 220 x 330 x 44 mm (8,66″ x 13″ x 1,73″) |
Material thickness | 2mm |
Surface | Powder coated |
Mounting type | Rack mount, Truss mount M10 (2x) |
Weight | 3,4kg |
Packaging dimensions | 550 mm x 335mm x 68 mm |
Packaged weight | TBC |
CONNECTIVITY |
Network
| 2x 10 Gbps / 1 Gbps Rugged fiber connectors on front panel (Optional), independent from other ports 4 x Gigabit (10/100/1000 BASE-T) EtherCON on front panel
4 x Gigabit (10/100/1000 BASE-T) EtherCON on rear panel
Serial| N/A
Power| 1x PowerCON True1 in
Backup power| N/A
Backup PoE| N/A
TEMPERATURE MANAGEMENT
Intelligent control| Yes
Number of fans| 2
Position of fans| Rear panel
Airflow direction| Front to rear
Noise level| TBC
USER INTERFACE|
Device status
| RGB LEDs
• OK
• Power
• RLinkX
• PoE
Dynamic labeling| E-ink Display
Fiber port status| 2x RGB LED
Port Speed/Activity Port Status
• Group indication
**** Cu Port Status| 2x RGB LED
Port Speed/Activity Port Status
• Group indication
• PoE
FIBER PORT SPECIFICATIONS
Port speed| 10G BASE-X or 1000 BASE-X
Port sensing| Fixed speed
COPPER PORT SPECIFICATIONS|
Port Speed| 10/100/1000 BASE-T
Port Sensing| Auto Negotiation
Auto Crossover| MDI/MDIX (allows use of straight or cross wired cable)
Auto Sensing| Full or Half Duplex (Gigabit is Full Duplex)
POWER OVER ETHERNET
**** Standards| 802.3af
802.3at
802.3bt
PoE Ports| 802.3af, 802.3at, 802.3bt
Total PoE power budget| 450W
LLDP Support| Yes
Power allocation
| User configurable:
• Priority per port
• Consumption vs Class/LLDP based
Power limit| • Total power budget firmware limit – port shutdown at overload
based on port priority
• Per port hardware and firmware power limits based on classification – port
shutdown at overload
SWITCH FEATURES
Boot time| 45 s
Redundant links| Yes
Group function| Yes
**** Ethernet compliance| IEEE 802.2
IEEE 802.3 IEEE 802.3u
IEEE 802.3x Flow Control
IEEE 802.3ab Gigabit Ethernet IEEE 802.3af PoE(optional) IEEE 802.3at
PoE+(optional)
IEEE 802.3bt PoE++ 90W(optional) IEEE 802.3ae
IEEE 802.1p CoS
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree IEEE 802.1s Multiple Spanning Tree IEEE 802.1Q
VLAN
IEEE 802.1Qav MVRP
IEEE 802.1 BA-2011 -> AVB (Audio Video Bridging) IEEE 802.1ab LLDP
IEEE 1588-2008 PTPv2
Jumbo frames| Yes, supported up to 12000 MTU (with restrictions when using
AVB)
** Supported protocols| Avnu AVB/Milan (Free of license)
Dante
RAVENNA/AES67
Ethersound Q-SYS/Q-LAN IPMX
sACN
ArtNet MANet HogNet
RTTrPL (BlackTrax)
…
Audio protocol compliance| Yes, low jitter and hardware timestamping (IEEE
1588-2008)
Ethernet switch type| Full non- blocking wire-speed switching performance
Memory| Flash 1 Gb RAM – 8 Mb NOR flash 4 Gb EMMC storage
Mac Adress table| 16384 entries
Adress learning / aging| Self learning, Auto aging
Switching troughput| 56 Gbps (10Gbps versions)
IGMP Querrier| Yes (V1|V2) (V3 compatible)
IGMP Snooping| Yes, enabled by default (V1|V2|V3)
---|---
MANAGEMENT|
Configuration| Built-in WebUI
Network wide configuration| Yes, with Araneo software
Firmware upgrades| Via WebUI or network wide with Araneo – Contingency option
with second FW file stored
POWER
Power input| 100-240 VAC
Backup power| NA
Backup PoE| NA
Power consumption| TBC
ENVIRONMENTAL
Operating temperature| 0 to +50 °C
Storage temperature| -10 to +70 °C
Humidity (non condensing)| 5 to 95% RH
APPROVALS PENDING
** Electromagnetic emmissions and immunity| FCC Part 15 CFR 47 class A
CAN/ICES-003
EN 61000
EN 55032
EN 55024
**** Safety| IEC 62368-1
EN 62368-1
UL 62368-1
CAN/CSA-C22.2 No. 62368-1
**** Certificates and approvals| cSGSus Mark (UL) CE Mark
UKCA Mark
CB Certificate
Green| RoHS
REACH
Description : Technical specifications GigaCore 10t | PRELIMINARY
Luminex reserves the right to modify the technical specifications at any given
time without prior notice.
No rights can be claimed from these specifications.
MADEN BELGIUM
Slamstraat 13 | 3600 Genk
Belgium
T +32 11 812 189
info@luminex.be
www.luminex.be
Documents / Resources
|
Luminex GigaCore 10t 10 Gigabit Ethernet
Switch
[pdf] User Manual
GigaCore 10t 10 Gigabit Ethernet Switch, GigaCore 10t, 10 Gigabit Ethernet
Switch, Ethernet Switch, Switch
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>