Aquabrass TOTEM Thermostatic Valve Installation Guide
- July 26, 2024
- Aquabrass
Table of Contents
Aquabrass TOTEM Thermostatic Valve
General installation instructions for the Thermostatic valve
Technical Parameters
- Operating pressure is 0.5 Bar ~ 5 Bar, suggested pressure is 1 Bar ~ 5 Bar
- Cold water supply temperature: 5 °C ~ 29 °C, hot water supply temperature: 55 °C ~ 85 °C;
- The maximum outlet water temperature is 45 °C;
Installation Points for Attention
- The thermostatic valve core shall be inspected and debugged by the factory, and it is not allowed to be dismantled or assembled by yourself;
- Before the installation of the tap, the impurities and sludge in the pipe must be removed to avoid blocking the tap and affecting the water outlet function;
- Pay attention to the water inlet direction of hot and cold water when installing the tap
- After installation, please check whether the joints are tightly connected and any leaks.
Installation Steps
- Fix the main body in the wall with a self-tapping screw and connect the pipe
- Cover the panel on the tap body, then install the hand wheel and lock it with screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>