SAVANA 36x72x24 Inches Raised Metal Garden Bed User Manual

June 10, 2024
SAVANA

SAVANA 36x72x24 Inches Raised Metal Garden Bed

SAVANA 36x72x24 Inches Raised Metal Garden Bed

NOTICE

Please retain these instructions for future reference.

  • Do not use as a step ladder or stand on any part of the product.
  • Fasten all bolts, screws and knobs firmly before use.
  • Reconfirm that all bolts, screws and knobs are secure every 90 days.
  • Note that some parts are heavy and have sharp edges.
  • Make sure that all parts of this product are in good working condition before beginning to use it. If any parts are broken, damaged, worn out or missing, stop using this product until they are repaired or the factory’s replacement parts are installed.
  • Please follow this manual’s installation and usage instructions, otherwise improper use may void the product warranty.

CAUTION

Symbols Please be aware that the metal panels on this unit may cause injury.
We recommend using protective equipment such as gloves and closed toe shoes to avoid any accidents from happening!

HARDWARE

Hardware

PARTS

Parts

TOOLS AND ASSEMBLY

  • PHILIPS SCREWDRIVER

  • SCISSORS

  • l PERSON ASSEMBLY

  • UP TO 45 MIN. ASSEMBLY

PRODUCT ASSEMBLY

  1. Take out all of the pieces and lay them out.

  2. Connect two (c) brackets to one (A) end panel with sixteen (#1) screws and secure with sixteen (#2) M03 nuts. Repeat with the other end.
    Product Assembly

  3. Connect two (B) side panels to two (c) brackets assemblies with sixteen (#1) screws, and secure with sixteen (#2) M03 nuts. Repeat with the other end.
    Product Assembly

  4. overlap the two halves of the garden bed, then connect twelve (#1) screws and twelve (#2) M03 nuts to secure. Keep the third and sixth set of connector holes empty.
    Product Assembly

  5. Connect the two (D) bracing rods with four (#1) screws and four (#2) M03 nuts
    Product Assembly

  6. Use four (#3) stakes to secure the brackets, with one stake per bracket.
    Product Assembly

  7. Measure and cut the (#4) rubber bumper into four pieces to match the length/width of the sides of the garden bed, then slide them on to the top edges.
    Product Assembly

EXTENDED DESIGN

Garden arches are not included in the metal raised garden bed package.

Extended Design

The (c) bracket includes additional holes for easy installation and securing of garden arches (sold separately). The maximum diameter of these holes is 17 mm. If connecting arches, the diameter of connecting tubes cannot exceed 17mm.
Garden arches can be bought at www.savanagarden.com.

Savana’s line of raised planter beds isdesigned for quality and convenient use. We’re here to help you have a truly fantastic gardening experience.

HELP CENTER

Have questions about your product? We’re here to help.
hello@)savanagarden.comsavanagarden.com)
Visit us at:
www.savanagarden.com
Help Center

Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals