AGSTWC Timed Water Controller Owner’s Manual
- July 25, 2024
- AGS
Table of Contents
AGSTWC Timed Water Controller
Specifications
- Timed Control for Drug Testing Lab Water Supplies
- Automatic or Manual Control over water
- Four Timed Delay Options: 2 minutes, 5 minutes, 10 minutes, or timed water cut off disabled
- Adaptable Utility Output for water or electric control 110VAC or 24VAC/DC
- Power Supply: 110VAC or 24VAC/DC
- Dry Contact Inputs for remote panic buttons and fire alarms
- Clear LED status display for easy use
- Modern & Compact Design with strong polyac PA-765 material
- Optional Covers Available: Wall mounted with flush or lockable shield
FAQ
- Q: What are the available timed delay options for water supply control?
- A: The AGS TGC offers four timed delay options: 2 minutes, 5 minutes, 10 minutes, or the option to disable timed water cut off.
- Q: How can I reset the water shut off timeout after a panic shutdown?
- A: Simply press the reset button on the controller to reset the water shut off timeout after a panic shutdown.
- Q: What power supply options are supported by the AGSTWC?
- A: The AGSTWC supports a power supply of 110VAC or 24VAC/DC.
PROTECT LIFE & PROPERTY
TIMED CONTROL FOR DRUG TESTING LAB WATER SUPPLIES
PRODUCT OVERVIEW
PRODUCT OVERVIEW
The AGSTWC provides a timed supply of water via a 110VAC or 24VAC/DC normally open water solenoid valve, or an electrical power supply.
Typically used for drug testing laboratories to comply with the Department of Transportation (DOT) 49 CFR 40.43 – Subpart D. Each controller has a selectable time out function built-in via internal dip switches, for 2 minutes, 5 minutes, 10 minutes or timer disabled. When the timer has reached the owner’s selected setting, the front LED will flash to warn user of the time out.
The AGSTWC is manufactured in a modern polycarbonate enclosure which provides protection from damage. The AGSTWC is designed to replace contractor constructed solutions for timed supply and panic shutdown, incorporating a crucial reset of the timed supply after a panic shutdown.
FEATURES
Information
- 30+ YEARS OF EXPERIENCE
INSTALLATION INSTRUCTIONS
SIMPLE OPERATION
- Green. Remains illuminated when water valve is closed.
- Amber. The controller LED will turn amber ten (1) minute before the automatic water shut off timeout is reached and the buzzer will beep, and the amber LED will then intermittently flash. After this time, the water will automatically turn on until reactivated.
- Red. Remains illuminated when a remote emergency stop device has been activated. The water supply is isolated until the emergency has been investigated, rectified, and reset. Press ON to re-enable/open the water supply.
PROTECTIVE COVERS
**AVAILABLE
**
These indoor/outdoor low-profile covers protect devices without restricting
legitimate operation.
The versatile cover offers excellent protection against physical damage (both
accidental and intentional), dust and grime as well as severe environmental
conditions inside and out.
Wall Mount Cover:
- AGSTWCWMCOVER
Flush Mount Cover:
- AGSTWCFMCOVER
PLUG & PLAY INSTALLATION
PROVIDING SAFETY & CONTROLS IN
- SCIENCE LABORATORIES
- COMMERCIAL KITCHENS
- BOILER ROOMS
- PARKING GARAGES
- GAS FEATURES
- EMS STATIONS
CONTACT
FIND OUT MORE
- info@americangassafety.com
- (727)-608-4375
- 6304 Benjamin Road, Suite 502, Tampa, FL
- www.americangassafety.com
- in: @american-gas-safety
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>