SPYPOINT FLEX Series Cellular Trail Camera User Manual

: July 25, 2024
: SPYPOINT

SPYPOINT FLEX Series Cellular Trail Camera

Product Information

The SPYPOINT FLEX Series is a cellular trail camera that offers innovative design, optimized antenna, and user-friendly features. It works with the SPYPOINT mobile app to provide exceptional performance at an affordable price point.

Specifications

Model: FLEX Series
Brand: SPYPOINT
Type: Cellular Trail Camera
Features: Optimized antenna, TEST and FORMAT buttons, automatic carrier connection technology

Components

FLEX Series:

Solar panel (FLEX-S only)
Microphone
IR LED
Light sensor
Delay light
Photo lens
Detection lens
Battery door
microSD card slot
Micro SIM card slots
Battery tray
Secondary Battery tray

FLEX-PLUS:

Battery level
Signal level
STATUS light
FORMAT button
FORMAT LED
TEST button
OFF/ON switch
12 V jack
Cable lock hole
Locking latch
Slots for installation strap
Screw-thread for standard Antenna

Detailed Component Information:

SOLAR PANEL (FLEX-S only): Solar energy sensor for charging the internal lithium battery.
MICROPHONE: Records sound in video mode.
IR LED: 2 powerful LEDs that illuminate at night for clear black and white photos and videos.
LIGHT SENSOR: Detects ambient lighting conditions for capturing photos and videos in color during the day and black and white at night.
DELAY LIGHT: Flashes for 20 seconds during installation to allow the user to move away without being captured.
PHOTO LENS: Image sensor.
DETECTION LENS: Enlarges the detection area of the camera’s motion sensor.

Product Usage Instructions

Powering On the Camera:

Locate the OFF/ON switch on the camera and turn it on.

Setting Up the Camera:

Insert a microSD card into the designated slot for saving photos and videos.
Install two micro SIM cards in the provided slots to activate cellular functions.

Using the Camera:

Download and install the SPYPOINT mobile app on your smartphone.
Connect the camera to the app using the provided instructions.
Configure settings such as motion detection sensitivity and image quality through the app.

Frequently Asked Questions (FAQ)

How do I contact technical support for my SPYPOINT FLEX Series camera?
You can contact our chat service on the SPYPOINT website or visit our support page for more information.
What type of SIM cards should I use with the camera?
It is important to use SPYPOINT SIM cards supplied by SPYPOINT to ensure proper functioning of the cellular features.

Introduction

FLEX SERIES PRESENTATION
The FLEX Series is one of many SPYPOINT trail cameras. While SPYPOINT has been a cellular trail camera leader for some time, the FLEX Series is a major step forward in customer-friendly and innovative design, optimized antenna, straightforward interface, TEST and FORMAT buttons, and automatic carrier connection technology.
The FLEX Series is a cellular trail camera that works with the SPYPOINT mobile app to:

Send photos and videos to your smartphone or tablet.
Check camera status.
Manage camera settings and preferences.

The FLEX Series offers features and performance that are unheard of at its price point. The commitment to user value carries through to the FLEX Series, even with all the new and innovative features that have been included. Hunters are
loving the performance and flexibility the latest camera from SPYPOINT delivers.

THANK YOU FOR CHOOSING A SPYPOINT PRODUCT
This User Manual will introduce you to the features of your new FLEX Series and will guide you through the acquisition of its functionalities so that you can use it to its full potential.
Our priority is to offer outstanding service to our customers. If you need technical support for your camera, here is how to contact us:
Contact our chat service directly on the SPYPOINT site (in the lower right- hand corner of the Support section, by clicking on the “Start Chat” window, www.spypoint.com).

Monday to Friday — 8:30 a.m. to 8:00 p.m.
Saturday-Sunday — 8:30 a.m. to 5:30 p.m.

Go to www.spypoint.com/en/support for more information about our devices.

ABOUT US
SPYPOINT’s mission is to offer you products that are easy to use, innovative, affordable, and of exceptional quality. Our products are mainly used in the hunting field and residential and commercial safety fields. They are distributed and appreciated on all continents and are continuously growing. Prosperous and respected, SPYPOINT is a company that is constantly developing new technologies and that remains attentive to its customer’s needs to offer cutting-edge products with concrete solutions to improve hunting and outdoor activities.

JOIN THE SPYPOINT COMMUNITY

Components

Solar panel FLEX-S only
Microphone
IR LED
Light sensor
Delay light
Photo lens
Detection lens
Battery door
microSD card slot
Micro SIM card slots
Battery tray
Secondary Battery tray FLEX-PLUS only
Battery level
Signal level
STATUS light
FORMAT button
FORMAT LED
TEST button
OFF/ON switch
12 V jack
Cable lock hole
Locking latch
Slots for installation strap
Screw-thread for standard ¼”-20 tripod mount
Antenna
SOLAR PANEL (FLEX-S only)
Solar energy sensor for charging the internal lithium battery.
MICROPHONE
Records sound in video mode.
IR LED
2 powerful LEDs that illuminate at night for clear black and white photos and videos.
LIGHT SENSOR
Detects the ambient lighting conditions for taking photos and videos: in colors during the day, black and white at night.
DELAY LIGHT
During installation, once the signal is found, this light flashes for 20 seconds to allow the user to walk away without being captured.
PHOTO LENS
Image sensor.
DETECTION LENS
Enlarges the detection area of the camera’s motion sensor.
BATTERY DOOR
Provides access to the battery compartment, microSD card, STATUS light, and OFF/ON switch.
microSD CARD SLOT
Space to insert the microSD card (not included) needed to save photos and videos.
MICRO SIM CARD SLOTS
Space to insert two SIM cards. It is necessary to activate cellular functions. The SIM cards, pre-installed and preactivated, are included with the camera. It is important to use a SPYPOINT SIM cards (supplied by SPYPOINT), otherwise the cellular functions of the camera will be inoperative.
BATTERY TRAY
Removable device in which the 8 alkaline or lithium AA non-rechargeable batteries are inserted (not included with the camera).
SECONDARY BATTERY TRAY (FLEX-PLUS only)
Removable device in which the 8 alkaline or lithium AA non-rechargeable batteries are inserted (not included with the camera).
BATTERY LEVEL
During startup, the camera will illuminate the number of lights corresponding with the current battery level of the camera.
SIGNAL LEVEL
During startup, the camera will illuminate the number of lights corres-ponding with the signal level. 5 bars being excellent and 1 bar being poor.
STATUS LIGHT
During installation, it flashes to indicate to the user the strength of the cellular signal. During regular operation, it indicates that the camera is recording or transferring files.
FORMAT BUTTON
This button will allow you to format the microSD card during the start up of the device.
FORMAT LED
The LED will flash while the SD card is being formatted and turn solid once complete.
TEST BUTTON
This button will allow you to send a photo to your app (if you have a transmission plan with remaining photos)
OFF/ON SWITCH
Allows the user to turn the camera OFF/ON.
12 V JACK
Allows you to insert a power cord connected to an external 12 V source.
CABLE LOCK HOLE
Allows you to install a #CLM-6FT padlock cable to secure the unit (sold separately).
LOCKING LATCH
Allows you to lock, unlock and open the door.
SLOTS FOR INSTALLATION STRAP
Allows the camera to be installed using the included installation strap.
SCREW-THREAD FOR STANDARD ¼”-20 TRIPOD MOUNT
Allows you to attach a standard tripod from ¼”-20.
ANTENNA
Captures the cellular signal.

Features

FLEX- M| FLEX G-36/G-36C| FLEX- PLUS| FLEX- S
---|---|---|---
NETWORK| LTE MULTI-CARRIER AUTO CONNECTIVITY
PHOTO RESOLUTION| 28| 36| 36| 36
PHOTO FILE FORMAT| JPEG
TIME- LAPSE| CHECK| CHECK| CHECK| CHECK
TIME-LAPSE +| CHECK| CHECK| CHECK| CHECK
MULTI-SHOT MODE| Up to 3
CAPTURE MODE| Color Photo/Video by day | Black & White Photo/Video by Night
VIDEO RESOLUTION| 720P| 1080P| 1080P| 1080P
VIDEO FILE FORMAT| MP4
VIDEO LENGTH| 15 Seconds
AUDIO RECORDING| CHECK| CHECK| CHECK| CHECK
EXTERNAL MEMORY| Up to 512GB
INTERNAL POWER| | | | CHECK
AA NON-RECHARGABLE BATTERIES| 8| 8| 8 or 16| 8
LITHIUM BATTERY PACK| 1x LIT-22| 1x LIT-22| 1x or 2x LIT-22| 1x LIT-22
EXTERNAL POWER SOURCE| 12V Power (SPLB-22, SPLB-10, KIT-12V)
MOVEMENT DETECTOR| Infrared
DETECTION ANGLE| 50°
DETECTION RANGE| 90 Feet / 27 Meters| 100 Feet / 30 Meters| 100 Feet / 30 Meters| 100 Feet / 30 Meters
TRIGGER SPEED| 0.4 Seconds| 0.3 Seconds| 0.3 Seconds| 0.3 Seconds
DELAY| Adjustable from Instant to 30 minutes
LED| 2 powerful LEDs
NIGHT RANGE| 90 Feet / 27 Meters| 100 Feet/30 Meters| 100 Feet/30 Meters| 100 Feet/30 Meters
PHYSICAL DIMENSIONS (IMPERIAL)| 3.93″ (W) x 3.15″ (D) x 5.1″ (H)| 3.93″ (W) x 3.15″ (D) x 5.1″ (H)| 3.94″ (W) x 4.34″ (D) x 5.5″ (H)| 3.93″ (W) x 3.15″ (D) x 8.7″ (H)
PHYSICAL DIMENSIONS (IMPERIAL)| 9.98 cm (W) x 8.00 cm (D) x 12.95 cm (H)| 9.98 cm (W) x 8.00 cm (D) x 12.95 cm (H)| 10.01 cm (W) x 11.02 cm (D) x 13.97 cm (H)| 9.98 cm (W) x 8.00 cm (D) x 22.10 cm (H)
OPERATING TEMPERATURE| -30 °C to 50 °C (-22 °F to 131 °F)
STORAGE TEMPERATURE| -40 °C to 60 °C (-40 °F to 140 °F)

Power Supply

BEFORE YOUR FIRST USE, CHARGE THE INTERNAL BATTERY

Ensure the camera is powered OFF
Plug the charging cable (12 V DC connector) to the camera.
The status light will illuminate red while charging and turn OFF when fully charged.
It is recommended to charge the battery fully (approximately 12 hours).

OPERATION

The solar panel is not an autonomous power source for your camera.
Its only function is to maintain the charge of the internal battery or to slowly charge it. The solar panel will be effective as soon as ambient solar energy is detected.
Make sure no objects or elements are obstructing the solar panel (e.g.: snow). If it is partially covered, the solar panel will still work, but to a limited extent. For optimal performance, it must be completely clear.
Under optimal conditions (a configuration that consumes little energy), energy and a sunny environment), the power supply of the camera will be autonomous.
If your internal battery runs out, the camera will shut down unless you have a secondary power source (e.g.: LIT-22, AA, 12V, ect.).
If the camera turns OFF, the solar panel will continue to charge the internal battery. Charging by solar power only can take an extended amount of time
- for a quick and complete recharge, connect the camera to a wall outlet using the supplied USB cable and a USB power adapter.
When you restart your camera, after recharging the internal battery, it will return to the settings you previously selected.

CHOOSING A POWER SOURCE
FLEX-S only – It’s not required to add additional power sources to your camera, but you may want to extend the overall time between visits.

4 options are available to you:

Alkaline or lithium AA batteries
Rechargeable battery 12 V (#KIT-12V sold separately)
Rechargeable battery pack 7.4 V (#LIT-22 sold separately)
Solar panel lithium battery 12 V (#SPLB-22 sold separately)

FOR BEST RESULTS AND NO LEAKAGE

Do not mix new and old batteries.
Always purchase the correct size and grade of battery most suitable for the intended use.
Replace all batteries in a set at the same time.
Clean the battery contacts and those of the device prior to battery installation.
Ensure that the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from equipment that is not to be used for an extended period of time.
Remove used batteries promptly.
Do not use rechargeable AA batteries (their lower voltage will generate operational issues).
When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

HOW TO INSTALL AA BATTERIES PROPERLY

Unlock the latch and open the FLEX Series door.
Place the battery holder back into the battery compartment with arrows facing up (See Photo)
Insert the AA batteries into the battery holder following polarity (+) and (-) indications.
Place the battery holder back into the battery compartment.

SPLB-22 OR SPLB-10: SOLAR PANEL LITHIUM BATTERY COMBO UNIT

Combines solar panel and lithium battery into one unit to reduce wires and setup time.
Plugs directly into camera to provide extensive, ongoing battery life for your camera so you can avoid visits.
Additional jacks and plugs allows for device flexibility.

MANAGING VARIOUS CAMERA POWER SUPPLY
If you choose to plug an external 12V battery (SPLB-22, SPLB-10 or KIT-12V, sold separately) into your camera, it becomes your camera’s new primary power source. The AA batteries will only be used once the 12V battery is depleted.
FLEX-S only: the cameras primary power source is the internal battery, once the internal battery is depleted, the camera will default to the 12V and then to the LIT-22 or AA’s installed in the battery tray You can check the battery level on your device or in the mobile application:

In the application: on the home page, you will see the battery charge level for each of your devices. You can access more details on the status of your battery by going to the STATUS page. When the battery logo turns red, we suggest that you change the batteries before it is completely drained.
Once the device is powered on. There are four green lights within the battery icon indicating the battery level. Your Flex + has two battery slots.

FLEX-PLUS ONLY
You can use them in any configuration with compatible batteries. Please check the chart below to confirm compatibility.

SLOT 1	SLOT 2
AA	LIT-22
LIT-22	AA
AA	AA
LIT-22	LIT-22
ANY	NONE
NONE	ANY

BATTERY USAGE

The camera will use rechargeable power sources before AA. If you are running two sets of AA batteries, the set with the lowest capacity will be used first. The same scenario applies to using two LIT-22’s. The camera will use the lowest capacity battery first and then switch to the second battery after it has been depleted.
Should you decide to also add an external battery using the 12V port of the camera – The camera will prioritize the 12V power first and only when it is depleted will it use the batteries located in the Slots.

Memory Card

INSTALLING A MEMORY CARD (NOT INCLUDED)
The use of a memory card is necessary for the operation of the camera. It is used to save photos, videos and other camera status files. Note that photos and videos in their original format are kept on the memory card. The files sent to your application are lighter versions. You can retrieve your photos and videos at any time by removing the card from the camera and transferring the contents to another device (e.g.: computer).
Your camera requires a microSD memory card, with a maximum capacity of 512 GB, sold separately. Here is a table showing the approximate quantity of photos or videos that can be recorded on the card, according to different memory card capacities.

MEMORY	4 GB	16 GB	32 GB	128 GB	512 GB
PHOTOS (36 MP)	1 700	7 000	13 900	55 700	222 900
PHOTOS (28MP)	2185	8 740	17 480	69 920	279 680

VIDEOS (1080P)

VIDEOS (720P)

| 627| 2 508| 5 016| 20 064| 80 256
941| 3 764| 7 528| 30 112| 120 448

INSERTING YOUR MEMORY CARD

Ensure the camera is turned OFF.
Find the microSD card slot. It is located at the bottom of the camera (see photo).
Insert a microSD card (up to 512 GB) in the microSD card slot with the metal contacts facing up.
The card is inserted correctly when a click is heard.
If using a microSD card 64 GB or larger – the SD card should be formatted in the flex series camera directly.

NOTE
The FLEX Series is equipped with continuous mode. This means that when the memory card is full, the camera continues to save your photos and videos by erasing the first recorded files.

REMOVING YOUR MEMORY CARD

Before removing a memory card, always turn your camera OFF to prevent files on the card from being deleted or damaged.
To remove the card, push it lightly into the camera until you hear a click. Then take it out of the device.

FORMATTING THE MEMORY CARD
During the start up of the camera, you can use the FORMAT button on the device to quick format the microSD card. This is required if you want to be able to take photos and videos while transmitting.

Turn ON the camera.
Press and hold the FORMAT button for 5 seconds.
The microSD light will blink green while the card is formatting.
Once complete, the microSD light will become solid green.

Preparation

SCREW IN ANTENNA
The antenna doesn’t come installed. Please insert as shown in the photo.

ACTIVATING YOUR CAMERA
Before you can use your camera, you must activate it. To do so, you will need the activation code.

FINDING THE ACTIVATION CODE
The activation code is located inside the FLEX Series’s battery compartment.

Activation

SPYPOINT APP – NEW USERS
On your mobile device or a computer, use the web browser and navigate to www.spypoint.com, select “LOGIN” in the top navigation menu. On the displayed “SPYPOINT” page, select “CREATE AN ACCOUNT“, fill out the required fields, then log in. Once your account is created you can either continue to use the web version of the application or you can switch to the mobile application.

If you choose to use the SPYPOINT app to activate your device, follow these steps:

On Google PlayTM or the App StoreTM, search for “SPYPOINT”.
Download and install the app on your smartphone or tablet.
Start the app. Select “LOGIN”. Enter your account information and select “LOGIN”.
Select the “CAMERAS” tab at the bottom of the screen and press the orange + button.
In the list, select your FLEX camera then follow the steps to scan your data matix code.
When complete, you will see the camera in the camera list.

If you choose to use our SPYPOINT website to activate your device, follow these steps:

On the www.spypoint.com website, select “LOGIN” in the top navigation menu. On the displayed “SPYPOINT” page, login using your account information. Then press the “LOGIN” button.
Select the + sign on the far right of the page; in the list, select your FLEX camera then follow the steps.
When complete, you will see the device in your camera list.

CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA
Go to www.spypoint.com/en/spypoint-experience/plans to read the latest offers and choose the plan that suits you.

Installation

INSTALLING YOUR CAMERA

To install the camera, loop the installation strap through the intended slots.
Choose a solid tree that does not move in the wind, as movement will cause false detections.
Make sure the area immediately in front of your camera is free of branches or twigs that could be blown away by the wind.
The camera should be at the same height of the animal’s mid-body.
The targeted animal should be at 25 feet (7.5 meters) away from the camera.
To produce brighter photos and videos at night, there should be items reflecting the camera’s flash in the background.

STARTING YOUR CAMERA
IMPORTANT VERIFICATIONS BEFORE STARTING YOUR CAMERA:

The antenna is installed.
The internal battery is fully charged.
The microSD card is formatted and inserted in the camera.
The camera is activated.
The camera is securely installed.

Turn ON the camera.
The green STATUS light will flash, and the battery level will be displayed.
The signal lights will flash together until the signal is found. Once the signal is found number of bars will correspond to the signal strength.
The microSD light will be ON.
The delay light will blink for 10 seconds, and the STATUS light will turn solid green.
All lights will turn OFF and the camera will go into standby mode – awaiting a trigger.

Starting Your Camera

OPERATIONAL VALIDATION TEST
You can use the following test to make sure everything works as it should:

TEST BUTTON
The TEST button forces the camera to take a single photo and transmit it. It will NOT work if the camera is already busy with another task. (Synchronizing with the server, recording a photo/video or running through the start up sequence of the camera.) This button will only work if the camera is on an active transmission plan with photos remaining.

After the camera has started and passed through the startup light sequence, the TEST button can be used. Ensure all lights are OFF before proceeding.
Press the TEST button for at least 1 second.
Battery level will be displayed.
Signal lights will blink together every second until the camera receives the signal strength. Then it will display the number of lights corresponding to the signal strength.
All Lights will turn OFF.

Configuration

MANAGE DEVICE
Use the SPYPOINT app to configure your camera.

EDIT DEVICE NAME

All possible values

| Allows you to name the camera for easy identification. This function is very useful for users with more than one camera.
---|---
RESTORE FACTORY SETTINGS

Restore

| Allows you to reset the camera to its original state.

IMAGE CAPTURE

CAPTURE MODE
Photo; video; time-lapse; time-lapse+| • Photo: The camera will capture photos based on motion detection.

• Video: The camera will capture video clips based on motion detection.

• Time-lapse: The camera will capture photos based on a schedule set by the user.

• Time-lapse+: The camera will capture photos based on a schedule set by the user and also capture photos based on motion detection.

---|---
MOTION DELAY
Instant; 10 seconds; 20 seconds; 30 seconds; 40 seconds; 50 seconds; 1 minute; 3 minutes; 5 minutes; 10 minutes; 15 minutes; 20 minutes; 30 minutes; 1 hour| Allows you to choose the period to wait before the camera detects again and records the next photo/video.

A longer delay minimizes the number of photos and videos taken and therefore maximizes battery life. A shorter delay maximizes surveillance in the area but consumes more power. Shorter delays are recommended when the camera is used for security purposes.

SD PHOTO RESOLUTION
High/optimal| Allows you to determine the quality of the photos saved on your microSD card. Optimal quality: 36 MP or 28 MP | High quality: 2 MP ( FLEX-M Only )
MULTI- SHOT
1; 2; 3| Allows you to take 2 or 3 consecutive photos at each detection, with a 5-second delay between each photo.
SENSITIVITY Low; normal; high| Allows you to choose the detection sensitivity of the device. A higher sensitivity allows you to detect movement in front of the camera more effectively, so the camera will take more pictures.

CELLULAR

DAILY SYNC TIME

All possible combinations

| Allows you to choose the time when the camera makes its first transfer of the day, each day.

Note : The camera transfers are configured by default with 6 times per day, determined from the time you activated your camera. For example, if your camera was activated at 1:42 p.m., this will be the default first transfer time.

The next transfer will be at 5:42 p.m.

---|---
SYNC FREQUENCY

1; 2; 4; 6; 12; each detection

| Allows you to choose the number of transfers the device performs each day.
CELLULAR

Activated/not activated

| Allows you to activate or deactivate the cellular mode.
Note that this setting will only take effect the next time the camera makes a transfer.
TAKE A PHOTO/VIDEO AT EACH SYNC

Activated/not activated

| During the next transfer, the camera will automatically take a photo or a video and communicate it to your application.

CAMERA COMMANDS

UPDATE FIRMWARE| Allows you to request a firmware update to your device.
---|---
TAKE A PHOTO/VIDEO

FLEX-S and FLEX-PLUS Only

UPDATE STATUS

FLEX-S and FLEX-PLUS Only

| Allows the user to request a photo/video instantly.
Allows the user to request a status update instantly.

GENERAL

DATE FORMAT

MM/DD/YYYY or DD/MM/YYYY

| Allows you to choose the date format displayed.
---|---
TIME FORMAT

12 h or 24 h

| Allows you to choose the time format displayed.
BATTERY TYPE

Automatic or AA_LIT

| Allows the user to select the battery type installed in the camera.

Verification

VERIFYING CAMERA STATUS
Different tools are available to help you check the status of your FLEX Series and to inform you of any problems that may occur during its operation. In this section, we will see 3 tools:

NOTIFICATIONS
The camera was designed to send notifications to your SPYPOINT app. This is to help you stay informed of the status of your camera. You will receive a notification on your smartphone at the next transfer when a photo/video is received or important notification is sent:

You forget to insert a microSD card in your camera.
The inserted microSD card is not compatible with your camera.
The battery percentage is too low.

APPLICATION STATUS PAGE
Here are the different indicators of the FLEX Series status you have access to. They are accessible on your app or on the SPYPOINT website. What appears in this page is a reflection of the camera at the last communication.

SIGNAL
Strength of the cellular signal| 1 – 5 bars
---|---
BATTERY
Battery percentage remaining| 0 – 100% (AA/LIT-22/12 V)
MEMORY CARD
Used space| 0 – 100%
LAST COMMUNICATION
The date and time of the last device transfer| Date and time
TEMPERATURE| °C or °F
POSITION
GPS| GPS coordinates
MODEL| FLEX Series
VERSION
Displays the firmware version| VX.XX.XX
LAST INSTALLATION
Last time your camera was turned ON| Date and time
ACTIVATION CODE| XXXX-XXX-XXXX

Verification

STATUS LIGHT EXPLAINED

Tool – Accessories – Options

SPYPOINT MOBILE APP
The key to a successful hunt is information and that’s what the SPYPOINT app is all about. View and sort all your photos and videos from the field, check hunting conditions, update camera settings, manage stand locations on your property, and more, right from your mobile device. It’s the mobile scouting solution you need to go into the woods confidently.

From the app, you can:

Manage camera statuses, settings and plans
View and manage photos and videos
Sort photos with advanced AI species filters
Request FULL-HD photos and videos
Maintain custom maps and markers
Monitor weather conditions

To learn more visit www.spypoint.com/app

PHOTO TRANSMISSION PLANS
SPYPOINT makes choosing a photo transmission plan as easy as possible with straightforward photo count thresholds and the option to go month-to-month to maximize flexibility, or annually to get the most savings. SPYPOINT even offers a free plan, sending 100 photos every month at no charge.
To learn more visit www.spypoint.com/plans

SPYPOINT WEB APP
As well as with the SPYPOINT mobile app, you can manage your device and photos/videos using the web app.
Log in at www.webapp.spypoint.com to manage cameras and view photos and videos online.

Transferring Files to a Computer

TRANSFERRING FILES TO A COMPUTER

Turn the camera OFF.
Remove the microSD card from the camera.
Insert the microSD card in the microSD computer slot, or use a USB adapter for microSD cards.
The computer will recognize the microSD card. There may be two different disks recognized, this is normal after use in the FLEX Series.
If the computer doesn’t detect the microSD card, this means the memory card is corrupt and needs to be replaced.

ON A PC

On your desktop, click on “My Computer” or “This PC”.
Locate your device under “Removable Disk” and click to access it. Then, click on “DCIM” and “100DSCIM” to find all saved photos and videos. If you do not see the photos or videos in the folder you checked, try again in the other “Removable Disk” folder.
Select the files you want to copy. With some Windows versions, the simplest way is to select them by clicking on the “Home” tab and choosing “Select all” on the right side. With some Windows versions, you can press on “Ctrl” and “A” or click on the “Edit” menu and choose “Select all”.
Click on the “Copy” icon on the left of the ribbon (or hold the “Ctrl” and “C” keys).
Once your photos and videos are transferred, click the “Safely remove hardware and eject media” button located in the task bar, then click “Eject mass media storage device”.

If you do not want to select all photos or videos, hold down the “Ctrl” key and click on the files you want to select before clicking on the “Copy” icon.

Access the folder where you want to save your photos and videos or create a new folder by clicking on the “New folder” button. (You can also click on “Ctrl”, “Shift”, and “N” to create a new folder, or right-click in a blank space in the “Pictures” folder and choose “New”, then, in the following menu, click on “Folder”.) Enter a name for your new folder, click on “Enter”, then double-click on the folder to open it. In the “Home” tab, choose “Paste” (or click simultaneously on the “Ctrl” and “V” keys). The photos and videos will be copied in the new folder.

ON A MAC
Click on the search tool in the “Toolbar”. Click the “Go” Tab, then select “Computer”. Locate your device under the “Locations” tab and click to access it. Then click on “DCIM” and “100DSCIM” to find all saved photos and videos. Click on “Edit” in the toolbar at the top of the screen, then click on “Select all” to highlight all individual files on the device. You can also access the “Select all” option by simultaneously clicking “Cmd” and “A”. If you don’t want to import everything, you can highlight the desired photos or videos individually. Transfer photos and videos by clicking on “Cmd” and on the file name. Click on “Edit again” and then “Copy” (or “Cmd” and “C”) to copy the highlighted files. Access the folder where you want to save your photos and videos, or create a new folder by right-clicking and pressing “Cmd” at the same time, then select “New folder” from the menu. Click on “Modify”, then on “Copy” (or “Cmd” and “V”) to copy your chosen files in the selected folder. The photos and videos can take a few minutes to download, depending on the size and the number of the file you are importing. Once your photos and videos are transferred, click on the “Eject” icon beside the name of your device, than unplug the device from your MAC.

Offered Accessories

Troubleshooting

Warranty

LIMITED WARRANTY
This SPYPOINT product is covered by a 2-year warranty that also covers parts and workmanship from the purchase date. The electronic cash register receipt is a proof of purchase and must be presented to confirm that the warranty is applicable. This warranty will be honored in the country of the original purchase only.

THIS SPYPOINT WARRANTY DOESN’T APPLY TO:

Consumable parts, including but not limited to batteries, the performance of which are known to decrease over time.
Damages caused by improper use of the device, use of the device with another product, negligence, accidents, contact with liquid, fires, earthquakes, or any other type of external causes.
SPYPOINT products bought online from an unauthorized retailer.
Products that were modified or altered.
Aesthetic damages, including but not limited to scratches or plastic breakage.
Damages caused by the usage of a product outside of the SPYPOINT recommendations.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

CE STATEMENT
Herby, SPYPOINT declares that this trail camera model FLEX Series complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. By Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
Use the FLEX Series in the environment with a temperature between -1°C and 35°C.

IC STATEMENT
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC:“ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

Disposal & frequency

DISPOSAL
ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES

If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment. Help ensure that valuable raw materials are recycled by returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol represents the obligation for the labeled camera to be sent to a separate center for the proper recycling of electrical and electronic equipment.

FREQUENCY

FREQUENCY RANGE:
800/850/900/1900/2100 MHz
MAXIMUM TRANSMISSION POWER:

SPYPOINT FLEX Series | Made in China
12 V DC • LIT-22 Lithium battery pack • 8 X R6 (AA) batteries (2 X 6 V)
Contain FCC ID: XMR201807EG91NA • IC: 10224A-2018EG91NA
Manufacturer: SPYPOINT
Address: 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
E-mail: info@spypoint.com
Importer Information: SPYPOINT
Company Name: SPYPOINT
Address: 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
Distribution Center 3000 Gannett Avenue, Des Moines IA 50321 • USA
EUROHUNT GmbH Harzblick 25, 99768 Harztor OT Ilfeld • Germany