SPYPOINT LM2 4G IR Infrared Verizon Nationwide Optimized Antenna Cellular Trail Camera User Guide
- October 30, 2023
- SPYPOINT
Table of Contents
SPYPOINT LM2 4G IR Infrared Verizon Nationwide Optimized Antenna Cellular Trail Camera
IN THE BOX
-
LM2
Camera -
SIM CARD
Pre-activated and inserted in the camera -
ANTENNA
-
INSTALLATION
REQUIRED (sold separately)
-
MEMORY CARD
2 to 32 GB class 10 ultra-high speed new microSD card -
8 AA
Lithium non-rechargeable recommended
OR -
LIT-10
-
Rechargeable Lithium Battery Pack
BEFORE YOU GO TO THE FIELD —Getting ready, first time use
-
Format your memory card
Long format your microSD card using a computer with an integrated microSD card slot or USB SD card reader -
Create an account onspypoint.com/activate
** **
-
**Download the SPYPOINT app and sign in.
-
In the Cameras tab, press the button.
Follow the instructions on the screen to add your camera. -
Screw in antenna & insert memory card, batteries.
Fill both sides of battery tray and insert following arrow orientation.
-
Turn your camera ON.
❶ STATUS light will flash red, orange, green 2 times then green while searching for signal (can take several minutes).
STATUS light will indicate signal strength
= Good
= Fair
= Weak or = No signal
If red, move camera to a new location and repeat step 6.
❸ Upper delay light will flash for 30s.
❹ When all the lights turn OFF the camera is ready to use. -
Test your camera
With the battery door open, move in front of the device.
STATUS light will turn green then orange. Once the STATUS light turns OFF, check your app to ensure the photo has been received. -
Turn your camera Off until you’re ready to install it in the field.
****
****IN THE FIELD**** -
Install your camera.
-
Turn your camera ON & test it.
(Steps 6 & 7)
COMPONENTS
- Antenna
- Detection lens
- microSD card slot
- Light sensor
- Delay light
- Photo lens
- LED
- OFF/ON switch
- STATUS light
- SIM card slot
- Battery compartment
- Battery tray
- Slot for installation strap
- Door
- Locking latch
- Cable lock hole
- 12 V jack
- Screw-thread for standard ¼”-20 tripod mount
- Antenna O-Ring
DISPOSAL
Only use original spare parts and accessories.
If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment. Help ensure that valuable raw materials are recycled by returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol
represents the obligation.
CAN ICES-3(B)/NMB-3(B)
FREQUENCY
Details available on the LM2 help web page (spypoint.com/LM2-guide)
FCC
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device must not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
WARRANTY
2-year limited warranty, visit spypoint.com/warranty for complete details.
Thank you for choosing SPYPOINT
SPYPOINT LM2 | Made in China
US/CAN models FCC ID: XMR201606EC21A • IC ID: 10224A-201611EC21A
V models FCC ID: XMR201609EC21V • IC ID: N/A
Distribution Center 3000 Gannett Avenue, Des Moines IA 50321 • USA
SPYPOINT 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
EUROHUNT GmbH Harzblick 25,99768 Harztor OT Ilfeld • Germany
Scan for detailed instructions, LED light pattern descriptions, complete user
manual & other helpful information.
Need assistance? Just contact us!
spypoint.com/support • 1-888-779-7646
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>