SPYPOINT G-36 Flex Cellular Trail Camera User Guide

May 15, 2024
SPYPOINT

SPYPOINT G-36 Flex Cellular Trail Camera Flex G-36
Quick Start Guide
v1.0

IN THE BOX

FLEX G-36
Camera
ANTENNA & GASKET
2 SIM CARDS
Preactivated and inserted (do not remove)
INSTALLATION
Strap

REQUIRED (sold separately)
MEMORY CARD

2 to 512 GB class 10 ultra-highspeed new microSD card
8 AA
Lithium non-rechargeable recommended
OR
LIT-22
Rechargeable lithium battery pack

BEFORE YOU GO TO THE FIELD

— Getting ready, first time use

#1 Create an account on spypoint.com/activate
#2 Download the SPYPOINT app and sign in.
#3 In the Cameras tab, press the button.
Follow the instructions on the screen to add your camera.
#4 Screw in antenna & insert memory card, batteries.
Insert the tray following the arrow orientation.SPYPOINT G-36 Flex Cellular
Trail Camera - ovreview 1 #5 Turn your camera ON.
All LEDs will begin to blink.SPYPOINT G-36 Flex Cellular Trail Camera -
ovreview 2 #6 Format your memory card.
Immediately hold down the format button until the FORMAT LED blinks green. Format is complete when LED stops blinking.SPYPOINT G-36 Flex Cellular Trail
Camera - ovreview 3 #7 Press the TEST button to receive a photo.SPYPOINT
G-36 Flex Cellular Trail Camera - ovreview 4 #8 Turn your camera OFF until you’re ready to install it in field.

IN THE FIELD

#9 Install your camera.
Tips
Use: Installation strap
Orientation: North or South
Height: Subject’s mid-body
Lens sight: No leaves, branches or tall grass in frontSPYPOINT G-36
Flex Cellular Trail Camera - ovreview 6 #10
Turn your camera ON & test it.
(Steps 5 & 7)

COMPONENTS

1 Microphone
2 IR LED
3 Light sensor
4 Delay light
5 Photo lens
6 Detection lens
7 Battery level
8 Signal level
9 STATUS light
10 FORMAT button
11 TEST button
12 OFF/ON switch
13 Antenna
14 Antenna gasket
15 Antenna O-Ring
16 12 V jack
17 Cable lock hole
18 Locking latch
19 Slots for installation strap
20 Screw-thread for standard

¼”-20 tripod mount
21| Battery door
22| microSD card slot
23| Micro SIM card slots
24| Battery tray

SPYPOINT G-36 Flex Cellular Trail Camera - ovreview 7

DISPOSAL

Only use original spare parts and accessories.
If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment.
Help ensure that valuable raw materials are recycled by returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol represents the obligation.

FREQUENCY

Details available on the FLEX G-36 help web page (spypoint.com/FLEXG36-guide)
FCC
**** This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

  1. This device must not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

WARRANTY

2-year limited warranty, visit spypoint.com/warranty for complete details.

Scan for detailed instructions, LED light pattern descriptions, complete user manual & other helpful information. spypoint.com/FLEXG36-guide
Need assistance? Just contact us!
spypoint.com/support
1-888-779-7646

Thank you for choosing SPYPOINT
SPYPOINT FLEX G-36 | Made in India
FCC ID: XMR201807EG91NA • IC ID: 10224A-2018EG91NA
Distribution Center 3000 Gannett Avenue, Des Moines IA 50321 • USA
SPYPOINT 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
EUROHUNT GmbH Harzblick 25,99768 Harztor OT Ilfeld • Germany

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals