NEC NP-ME453X LCD Projector User Guide
- July 23, 2024
- NEC
Table of Contents
NEC NP-ME453X LCD Projector
Notification
How to login when controlling the projector using a web browser
Model category| Model number of the target projector| Refer to
the User’s Manual
---|---|---
PE
| NP-PE506UL / NP-PE456USL / NP-PE506WL / NP-PE456WSL|
page62
ME/MC
| NP-ME403U / NP-ME423W / NP-ME383W / NP-ME453X / NP-MC423W / NP-MC393W / NP- MC453X I NP-MC363X I NP-MC333X|
page 58
Title: 2
Enter through a Web browser
Operations before change
|
Operations after change
---|---
Connecting Your Computer
-
Start the computer,s Web browser.
-
Enter the IP address on the projector set in the URL input field of the Web Browser. The “Network Display System” window for your projector will be displayed.
-
Click [Login] at the top left of the window.
-
Enter the password in the [Password], then click [Login] ” * ” the factory default setting is the user name: “admin” (administrator privi leges), password: “admin”.
| Connecting Your Computer
-
Start the computer’s Web browser.
-
Enter the IP address on the projector set in the URL input field of the Web browser. The “Network Display System• window for your projector will be displayed.
-
Click [Login] at the top left of the window.
-
Set the password in [New Password] and [Confirm Password], then click [OK] .
Note
If use the projector for the first time or it has been initialized, a password setting interface will pop up when starting up the projector for the first time.
Users can set the password for web page access.
-
Enter the set password in [Password]. then click [Login].
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>