SOUND PRO SPG-1750 LED Stereo Speaker System User Manual
- July 23, 2024
- SOUND PRO
Table of Contents
SOUND PRO SPG-1750 LED Stereo Speaker System User Manual
Warning
TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product is enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONEL
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance
The Caution Marking is located at the back enclosure of the apparatus. The Rating plate is located at the back enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for a long period of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus
- Do not overload wall outlet. Use only power source as indicated.
- Use replacement part as specified by the manufacturer.
- Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
- Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction.
- Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Excessive sound pressure from earphones and headphone can cause hearing loss.
- Minimum distances of 4 inches around the apparatus for sufficient ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- The use of apparatus in moderate climates.
- Attention should be drawn to the environmental aspects of battery disposal.
Features
- Versatile Speakers – these powerful speakers can be set up as stereo tower speakers or attached together horizontally like a traditional sound bar.
- Sleek Computer Speakers – – Surround your monitor with clear, warm audio to enjoy your favorite music or watch your favorite videos.
- High-Quality Audio – – 60W of rich audio playback for optimal performance during gaming sessions
- Bluetooth® Wireless Technology — allows you to stream all your favorite music content from Bluetooth-enabled devices
- RGB LEDs — Lighting effects that dance along with the music and gaming sessions
Specifications
Speaker Output: 60W (RMS)
Speaker Drivers: 2.25 inches x4
PMPO Output: 600W
Inputs: HD-Input, Optical, USB, 3.5mm Aux, Bluetooth
Power: DC 15V 3A
Bluetooth Version: v5.0
Speaker Control Panel
- Power/Mode Button: Press to power on/Hold for 3 seconds to power off. Press to switch channel: ARC-BT-Optical-AUX-USB.
- RGB Light Function: Short press to change light color, long press to change light mode.
- Brightness: Short press the RGB light mode switch.
- Short press switch to the next song, Double click to switch to the previous song.
- VOL+/VOL- knob: Rotate knob clockwise to increase volume, Counter-clockwise to decrease volume.
Remote Control
-
Power Button: Press to power on/ Hold for 3 seconds to power off.
-
SOURCE: Press to switch channel:
Hold for -
MUTE: Mute/ Recover the volume.
-
VOL+: Volume Up.
-
: Previous BT and USB mode:
skip to the previous track. -
: BT and USB Mode: Play/ Pause.
USB Mode: Hold for 3 seconds to switch between USB single loop playback and list loop playback. Long press BT connection/disconnect. -
: Next BT and USB mode: skip to the next track.
-
VOL-: Volume Down.
-
BASS/TREBLE: BASS/TREBLE mode switch
-
BASS-/TREBLE -: Decrease the BASS-/TREBLE- level.
-
BASS+/TREBLE+: Increase the BASS+/TREBLE+ level.
-
Brightness Function: Short press RGB light mode switch.
-
RGB Light Function: Short press to change light color, long press to change light mode.
-
EQ:
A. MUSIC: Press to switch to Music mode, the display will show: “EQ01”
B. MOVIE: Press to switch to Movie mode, the display will show: “EQ02”
C. NEWS: Press to switch to News mode, and the display will show: “EQ03”
Input/Output
- DC IN: Connect to power source.
- ARC: HD Input to connect to devices such as a PC or TV
- Optical: Optional optical input for compatible devices.
- Aux: Connect to sources such as computer, CD player, MP3, etc.
- USB Input
- Connect Port
Connecting Speakers
Two unit audio connection: Use connecting cables to insert into the
interface respectively to complete the connection between the two unit.
Bluetooth Mode
To Connect to Bluetooth
- Hold the “ ****” button for ~3 seconds on the soundboard or the “SOURCE” button on the remote control to connect to Bluetooth mode.
- On your device, go to the Bluetooth settings menu, find and select “SPG-1750” to the soundbar.
To Disconnect from Bluetooth
If your device is already connected to the speaker’s Bluetooth mode, press and hold the “ ” button for 3 seconds.
HD-Input ARC
Connect to HD port
ARC (audio return channel) Your sound bar supports HD and Audio Return Channel
(ARC). If your TV is HD ARC compatible, you can use an HD cable to listen to
TV audio through your sound bar.
- Turn on HD-CEC operation on the TV. See your TV’s user manual for details. The HD ARC interface on the TV has a special label. See your TV’s user manual for details.
- Use an optical & HD cable to connect the HD ARC interface on the sound bar and the HD ARC interface on the TV.
Connect to OPTICAL
Use an optical cable to connect the OPT (OPTICAL) interface on the sound bar
and the OPTICAL OUT interface on the TV or other device.
Connect to 3.5mm Audio In
Use a 3.5mm to 3.5mm audio cable Use a 3.5mm to 3.5mm audio cable to connect
the TV’s AUDIO OUT interface and the sound bar’s AUDIO IN interface.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Support
If you have problems with your device, please consult the instructions in this
manual. Please also visit us on the web at www.soundproav.com to get up to the
minute news, alerts, and documentation for your device. For additional
assistance, please contact Soundproof Technical support.
Soundproof Technical Support 2320 East 49th Street Vernon, CA 90058
Tel: 866-411-6292
Email: support@soundproav.com
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>