UTOPIA UH Series Steam Iron User Guide
- July 23, 2024
- UTOPIA
Table of Contents
UTOPIA UH Series Steam Iron
UH0158/UH0635/UH0636/UH0637 UH0896/UH0897 /UH0898/UH0899
Please read these instructions carefully and familiarise yourself with the irons features and functions before using.
Characteristics and structure
Your Utopia Iron is a full function Electronic Steam Iron with temperature control, spray, steam , steam burst and dry ironing capability. The modern design and high heat efficiency makes ironing easier and quicker
- A: Steam regulating knob
- B: Steam burst button
- C: Spraying button
- D: Indicator light
- E: 360 degree rotating cord
- F: Temperature regulating knob
- G: Water tank
- H: Soleplate
- I: Spray jet
- J: Water inlet cover
- K: Self-clean button
How to fill water:
Disconnect the iron from mains supply outlet, move the steam regulating knob
to” ” position,release the water inlet cover,fill the water up to the “MAX”
level marked on the water tank.
How to dry iron
- Turn the temperature regulating knob to ” 0″ position, turn the steam knob to “ ” position, put the plug into the socket.
- Turn the temperature regulating knob according to the recommendation of garment label.
- Indicator light glows means the iron is swithced on,when the required temperature is reached,the indicator ligiht goes off,the iron is ready for use.
- Keep the steam regulating knob in” ” in case of dry ironing.
How to spray:
Pressing the spray button will spray water from the spray jet. Please ensure
there is sufficient water in the tank.
How to iron with steam:
- Fill the water tank with water. Please ensure that Steam regulating knob should be in” ” position while filling the water.
- Turn the temperature regulating knob to according to the recommendation of garment label.
- Indicator light glows means the iron is swithced on,when the required temperature is reached,the indicator ligiht goes off,the iron is ready for use. Turn the steam regulating knob to” ” position,the steam will be sprayed, you can start to iron.
- After the ironing is completed,turn the temperature regulating knob to “0” positon,turn the steam regulating knob to “ ” position,pull out the plug, and pour out the re mining water in the tank.
How to use steam burst:
Press down the steam burst button, the base plate will spray out a strong
steam. Attention: Steam burst must be used in steam ironing setting. ( The
temperature regulating knob must be turned to the steam section).
How to use self-cleaning
This function removes the scales and min era ls bu lit up in the steam
chamber, The iron will remain in the best condition if this function is
performed at least once a month or more regularly on the hardness of the water
used .
Fill the iron with water ,place it on a surface in upright standing position,
connect to a mains supply outlet, turn the temperature regulating knob to
“MAX” position, indicator light glows indicating the iron is switched on,when
it goes off when the required temperature is reached,wait for one more cycle,
indicator glows and goes off. Turn the temperature regulating knob to”O”
position,disconnect the iron from the m a ins supply outlet,hold the iron
horizentally over a sink,pull and hold the self-cleaning knob to position,
steam and boiling hot water will drain from the holes on the soleplate washing
away the scales and minerals that have built up inside of the steam chamber .
Gently move the iron back and forth until the water tank is empty,when the
self-cleaning is com plete,release the self-cleaning knob.
Attention:
- Please read the owner’s manual before using the product.
- Before using, please check the voltage of the product if it is the same with the one in your home.
- When using steam ironing, it is recommended to use distilled water.
- ‘When ironing it is recommending that the user not leave the iron unattended or allow children to play with or near the hot iron.
- When filling water or pouring out remaining water. Please pull out the plug first.
- After using, turn the steam knob to “ ” ,turn the temperature regulating knob to “0”, pull out the plug, when placing the iron on its stand, ensure that the surface on wihch the stand is placed is stable.
- If the supply cord is damaged,it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The iron must not be left unattended while it is connected to the supply mains.
- The plug must be removed from the socket-outlet before the water reservoir is filled with water.
- The iron must be used and rested on a stable surface.
- When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
- The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Solutions
- Sort out the articles to be ironed according to the type of fabric. This will minimize the frequency of temperature adjustment for different garments.
- Try ironing a small area on the backsides or inside the garment if you are unsure about the type of fabric. Start with a low temperature and increase gradually.
- Wait for about three minutes before ironing heat-sensitive fabrics. Temperature adjustment needs certain time to reach the required level no matter it is higher or lower.
- Delicate fabric such as silk, wool, velour,etc. are best ironed with an ironing cloth to prevent shine marks.
- You may require a few number of presses to activate the spray,burst and vertical burst functions.
- Read the garment labels and follow the manufacturer’s ironing instructions are often shown by symbols similar to the following:
