Xmenha SK18 Wireless Bluetooth Headset User Manual

Xmenha SK18 Wireless Bluetooth Headset

Product Specifications

• Model: XYZ-2000
• Weight: 2.5 lbs
• Dimensions: 10 x 5 x 3 inches
• Power Supply: AC 110-240V, 50-60Hz

Product Usage Instructions

Setup and Initial Use

Ensure the product is placed on a stable surface. Connect the power supply to the designated port and plug it into a power outlet within the specified range. Turn on the product using the power button.

Operating the Product

Use the control panel to adjust settings as needed. Refer to the user manual for specific instructions on different modes and functions. Be cautious with sharp edges and hot surfaces during operation.

Maintenance and Cleaning

Before cleaning, make sure the product is unplugged and completely cooled down. Use a damp cloth with mild detergent to clean the exterior surfaces. Do not immerse the product in water.

Frequently Asked Questions

Q: How do I reset the product to factory settings?

A: To reset the product, locate the reset button on the back panel and press and hold it for 10 seconds until the indicator lights flash.

Q: Can I use the product outdoors?

A: This product is designed for indoor use only. Using it outdoors may result in damage due to exposure to environmental factors.

Functional operation diagram

Headset function operation instructions

1. Power on: Long press the function key for 3 seconds
2. Shutdown: Long press the function key for 6 seconds
3. Answer/end: Click the function key
4. Reject incoming calls: Hold down the multifunction key for 1.5 seconds
   • Pause/Play: Double-click the function key
   • Previous song: Three-click function key (random)
5. Next song: Three-click function key (random)
6. Volume+: Long press the function key for 1.5 seconds (random) to increase the volume by one grid
7. Volume -: Press and hold the function key for 1.5 seconds (ran-dom) to decrease the volume by one grid
8. Game mode: Four-click function key (random) to switch game mode/music mode
9. Voice Assistant: Activate Siri with four click function keys (ran-dom)
10. Restore factory settings: Five-click function key (clear pairing record) to operate without connecting the phone

Headset connection pairing operation

When the headset charging compartment is taken out, it will start automatically, and the red and blue lights will flash alternately to start the device search As shown in the following figure.

Charging state indication

1. 100% of the charging chamber’s power display 0.00 indicates low power display and charging is required
2. When charging the charging box, the display screen displays 100% specific power, and when fully charged, it displays 100%
3. When the charging chamber charges the headset, the Headphones light red, bin blue light shining
4. When the headset is low, the prompt (Beep) indicates a low-power prompt

Product safety information

Please read all instructions and warnings before using this product. Improper use will damage the product or personal safety.

1. The product contains batteries. Do not expose the product to strong sunlight or overheated environments such as heaters.
2. Do not store this product at high temperature,
3. The product can not be placed here the fire source and other harsh environments,
   • It is forbidden to knock, throw, trample, squeeze, or throw into the fire. If there is swelling, do not use it.
4. The ambient temperature of the product is 0-45 ° C. ng are ge re our enda geng he get pedon a property and bear the consequences.
5. Nonprofessional personnel are strictly forbidden to disassemble this product, otherwise, it may cause fire, or even completely damage this product
6. Do not use loads (electric, appliances) that exceed the output current of this product. If the load is exceeded, it will automatically stop working
7. Please use a clean cotton cloth to dean the headphone charging contact regularly,
   • To avoid the situation that the headset cannot be charged or turned on due to long-term mundaneness.
8. Do not put this product in water (or washing machine), if the product has water ingress, please wait for it to dry naturally before using it.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not. installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not. occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off. and on, the user is encouraged to wy to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to. computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

RF waming statement:

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>