Velleman VTSUSB1 Soldering Station User Manual
- July 22, 2024
- Velleman
Table of Contents
Velleman VTSUSB1 Soldering Station
Product Information
Specifications
- Input: 5V, USB
- Power: 8 W
- Heating Time: < 15 sec
- Cooling Time: < 30 sec
- Battery: 18650 Li-ion 3.7 V, 2200 mAh
Product Usage Instructions
Safety Instructions
Do not puncture batteries or throw them into fire as they may explode. Do
not attempt to recharge non-rechargeable batteries (alkaline). Dispose of
batteries by local regulations. Keep batteries away from children.
General Operation
- Take the soldering iron out of its stand.
- Hold the soldering button pressed. You can solder as soon as the LED lights.
- When finished soldering, release the soldering button and place the soldering iron in its stand.
- Disconnect the stand from the power supply and let the soldering iron cool after use.
Tips on How to Solder
- File off any dirt, rust, or paint on the part you wish to solder.
- Heat the part with the soldering iron.
- Apply rosin-based solder to the part and melt it with the soldering iron. When using non-rosin-based solder, be sure to apply a soldering paste to the part before applying the solder.
- Wait for the solder to cool and harden before moving the soldered part.
Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents, or strong detergents. Store the appliance, its
accessories, and this user manual in the original packaging. Always store in a
cool and dry place.
Frequently Asked Questions (FAQ)
-
Q: Can I use non-rechargeable batteries with this product?
A: No, do not attempt to recharge non-rechargeable batteries (alkaline) with this product. Use only rechargeable batteries as specified in the user manual. -
Q: How should I store the soldering iron when not in use?
A: Store the soldering iron in its stand, disconnected from the power supply, in a cool and dry place. Ensure it is safely stored to prevent any accidents.
Introduction
To all residents of the European Union Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
Safety Instructions
- Read and understand this manual and all safety signs before using this appliance.
- Class III appliance.
- Indoor use only.
- Do not use near inflammable products or in explosive atmospheres.
- Be careful when using the appliance in places where there are combustible materials.
- Do not use in presence of an explosive atmosphere.
- Heat may be conducted to combustible materials which are out of sight.
- Only use in properly ventilated rooms.
- A fire may result if the appliance is not used with care.
- Do not touch the shafts and tips as this can cause serious burns.
- Keep the tips away from the body, clothes, or other flammable material.
- Do not aim at the eyes.
- Use gloves and/or heat-resistant tools to pick up the PCB assembly to prevent burns.
- Always return the irons and gun to their stands between uses.
- Place on its stand after use and allow to cool before storage.
- Place the device on a level, stable, and fire-resistant working surface.
- Do not inhale solder fumes.
- The vapours that are released during soldering are harmful.
- Therefore, you shall only use the soldering station in well-ventilated areas or under an exhaust hood (solder fume extractor).
- Dispose of fume filters and solder residue in accordance with local regulations.
- WARNING – This tool must be placed on its stand when not in use. Do not leave the tool unattended when switched on.
- Use the soldering iron on a heatproof workbench. Let a hot soldering iron cool down naturally and do not immerse in water.
- Always keep tips coated with tin to ensure a long service life.
- This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device.
- Cleaning and user maintenance shall not be made by children without supervision.
- There are no user-serviceable parts inside the device.
- Refer to an authorized dealer for service and/or spare parts.
- Do not immerge the device in any liquid.
- Keep the main unit away from high heat and fire.
General Guidelines
- Refer to the Velleman® Service and Quality Warranty on www.velleman.eu.
- Protect this device from shocks and abuse. Avoid brute force when operating the device.
- Familiarise yourself with the functions of the device before actually using it.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorized way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Keep this manual for future reference.
Overview
- soldering button
- soldering LED
- charging LED
Operation
Battery and Charging
Warning: Do not puncture batteries or throw them in fire as they may
explode. Do not attempt to recharge nonrechargeable batteries (alkaline).
Dispose of batteries by local regulations. Keep batteries away from children.
- Prior to first use, insert the rechargeable battery into the soldering iron. Open the soldering iron by turning the back part to the left. Insert the battery in the shaft, the negative pole on the bottom. Close the soldering iron and proceed to a complete charge.
- Connect the stand to a USB port using the included USB cable. To do this, insert the small plug into the stand and the larger plug into a powered USB port.
- Place the soldering iron in the stand. The charging LED will light red while charging. The soldering iron is ready for use as soon as the charging LED turns green.
General Operation
- Take the soldering iron out of its stand.
- Hold the soldering button pressed. You can solder as soon as the soldering LED lights.
- When finished soldering, release the soldering button and place the soldering iron in its stand.
- Disconnect the stand from the power supply and let the soldering iron cool after use.
Tips on How to Solder
- File off any dirt, rust or paint on the part you wish to solder.
- Heat the part with the soldering iron.
- Apply rosin-based solder to the part and melt it with the soldering iron. When using non-rosin-based solder, be sure to apply a soldering paste to the part before applying the solder.
- Wait for the solder to cool and harden before moving the soldered part.
Maintenance
- Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
- Store the appliance, its accessories and this user manual in the original packaging. Always store in a cool and dry place.
Specifications
- Input …………………………………………………. 5 V, USB
- Power ……………………………………………………… 8 W
- Max. heating temperature ……………………. 380-420 °C
- Heating time ………………………………………… < 15 sec
- Cooling time …………………………………………. < 30 sec
- Battery …………………….. 18650 Li-ion 3.7 V, 2200 mAh
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.
COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Made in PRC
Imported by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.velleman.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>