RAZER MAG FORGE 110R Gaming Case User Guide
- July 22, 2024
- Razer
Table of Contents
RAZER MAG FORGE 110R Gaming Case
Specifications
- Size: Mid-Tower
- Fan LED Controller: 1 to 6 ARGB (3 pin) Control Board (MAG FORGE 111R / 112R)
- Pre-Installed Fan: MAG FORGE 110R / 111R Rear: 1x 120 mm ARGBfan; MAG FORGE 112R Rear: 1x 120 mm ARGB fan Front: 3x 120 mm ARGB fans
- Material: Chassis – Steel (SPCC 0.5 mm); Right Side Panel – Steel; Front Bezel – Plastic + Mesh; Left Side Panel (110R) – Transparent acrylic; Left Side Panel (111R / 112R) – Tempered glass
- Dust Filters: Top magnetic frame dust filter PVC mesh, Bottom dust filter
- Fan Support: Top – 2x 120 mm / 2x 140 mm, Front – 3x 120 mm / 2x 140 mm, Rear – 1x 120 mm
- Drive Bays: 3 x 2.5 SSD mounting brackets, 1 SSD tray & 2 with screw only, 2 x 3.5” + 2.5” combo HDD tray
- Expansion Slots: Supports 7 expansion slots
- IO Panel: LED switch button, 2x USB 3.2 Gen1 Type A ports, Mic-in jack, Line-out jack, Reset button, Power button
- Radiator Support: Top – 120/240 mm, Front – 120 / 140 / 240 mm, Rear – 120 mm
- Clearance: CPU Cooler Height – Max 160mm, Graphics Card Length
- Max 330 mm, PSU Length – Standard ATX 160mm, Max 200 mm without 3.5 HDD tray installed
- Case Dimensions: 409(D) x 214(W) x 485(H) mm / 16.1(D) x 8.43(W) x 19.09(H) inch
- Motherboard Support: ATX/ M-ATX/ ITX
Product Usage Instructions
SSD, HDD Installation
Follow the manual instructions to install your SSD and HDD in the
designated mounting brackets and trays provided.
Opening the Left & Right Side Cover
To access the internal components, carefully open the left or right side
panel by removing the screws and gently sliding the panel outwards.
Motherboard Installation
Install your motherboard using the provided motherboard studs and screws
according to the motherboard size specifications (ATX/M-ATX/ITX).
Graphics Card Installation
Securely install your graphics card in the PCIe slot ensuring it is
properly aligned and fastened with suitable screws.
PSU Installation
Mount your PSU in the designated area and secure it using the appropriate
screws for a stable power supply connection.
FAQ
-
Q: How do I change the LED effects on my fan?
- A: Short press the LED switch button to cycle through various LED effects including rainbow, gradient colors, breathing effects, and fixed colors.
-
Q: Can I connect additional ARGB fans to the system?
- A: Yes, you can connect up to six ARGB fans using the provided connectors and following the ARGB fan connection guidelines in the manual.
MAG FORGE 110R
MAG FORGE 111R
MAG FORGE 112R
User Guide
Accessories
Specification
| Size | Mid-Tower |
|---|---|
| Fan LED Controller | 1 to 6 ARGB (3 pin) Control Board **(MAG FORGE 111R |
/ 112R)
Pre-Installed Fan| MAG FORGE 110R / 111R**
Rear: 1x 120 mm ARGB fan
MAG FORGE 112R
Rear: 1x 120 mm ARGB fan
Front: 3x 120 mm ARGB fans
Material| Chassis: Steel (SPCC 0.5 mm)Right Side Panel: Steel
Front Bezel: Plastic + Mesh
MAG FORGE 110R
Left Side Panel: Transparent acrylic
MAG FORGE 111R / 112R
Left Side Panel: Tempered glass ( 左側強化玻璃 )
Dust Filters| Top: Magnetic frame dust filter PVC mesh
Bottom dust filter
Fan Support| Top: 2x 120 mm / 2x 140 mm Front: 3x 120 mm / 2x 140 mm
Rear: 1x 120 mm
Drive Bays| 3 x 2.5” SSD mounting brackets（1 SSD tray & 2 with screw
only
2 x 3.5’’ + 2.5’’ combo HDD tray
Expansion Slots| Supports 7 expansion slots
IO Panel| 1x LED switch button
2x USB 3.2 Gen1 Type A ports 1x Mic-in jack
1x Line-out jack
1x Reset button 1x Power button
Radiator Support| Top: 120/ 240 mm
Front: 120 / 140 / 240 mm
Rear: 120 mm
Clearance| CPU Cooler Height: Max 160mm (6.3 inch) Graphics Card Length: Max 330 mm (12.99 inch) PSU Length: Standard ATX 160mm (6.3 inch)
Max 200 mm (7.87 inch) without 3.5” HDD tray installed
Case Dimensions| 409(D) x 214(W) x 485(H) mm
16.1(D) x 8.43(W) x 19.09(H) inch
Motherboard Support| ATX/ M-ATX/ ITX
Case Features
Side & Front View
IO Panel / IO
- LED switch button
- USB 3.2 Gen 1 Type-A
- Mic-in
- Line-out
- Reset button
- Power button
SSD, HDD Installation
Opening the Left & Right Side Cover
Motherboard Installation
Graphics Card Installation
PSU Installation 
Control Board Specification
| Dimensions (mm) (mm) | 50 x 30 |
|---|---|
| Support LED Type LED | DC5V Addressable RGB LED |
| Connectors | 1x LED switch connector (LED ) 1x SATA power connector |
(SATA )
1x MSI motherboard JRAINBOW connector ( JRAINBOW )
6x 3-pin ARGB LED connectors (3 ARGB LED )
ARGB Pin Definition ARGB|
| LED effect cycle:|
| 1. Rainbow|
| 2. Seven-color trailing|
| 3. Seven-color gradient|
| 4. Violet|
| 5. White|
| 6. Blue|
| 7. Cyan|
| 8. Green|
| 9. Yellow|
LED Effects
(1 short press the LED switch)
LED
| 10. Red
11. Rainbow breathing
12. Red breathing
13. Yellow breathing
14. Green breathing
15. Cyan breathing
16. Blue breathing
|
| 17. White breathing|
| 18. Violet breathing|
| 19. Fixed rainbow|
| 20. Red|
| 21. Yellow|
| 22. Green|
| 23. Cyan|
| 24. Blue|
| 25. White|
| 26. Violet|
ARGB Fan Connection
LED switch control description
- Short press the LED switch once to switch the LED effect
- Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode.
- Press and hold the LED switch for 6 seconds to turn off the LED.
Note
- This LED Hub can support up to 10 MSI devices or 6 non-MSI devices.
- Each port can support a maximum of 64 ARGB LEDs, with a total of no more than 128 LEDs.
- Exceeding these limits may cause ARGB LEDs to display abnormal colors, flicker, or be unable to change colors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>