Bomar P3000-22 Hatches and Ports Instructions
- July 21, 2024
- Bomar
Table of Contents
Bomar P3000-22 Hatches and Ports
Product Specifications
- Product Name: Bomar Hatches and Ports Gasket
- Part Numbers: P100-53, P100-51, P100-52, P3000-20, P3000-21, P3000-22
- Material: Adhesive-backed gasket
Product Usage Instructions
Replacing Gasket on Bomar Hatches and Ports
- Pull out old gasket using a sharp metal object (knife, awl, narrow chisel) and scrape out all old adhesive. Ensure all old adhesive is removed.
- Wipe down the gasket area with Isopropyl Alcohol. Use only Isopropyl Alcohol for cleaning.
- Starting near a hinge, pull back tape cover and apply the new gasket. Install the gasket around the perimeter and carefully cut it to length forming a butt joint. Use a new tube of superglue to cement the butt joint, being cautious not to get superglue on the lens. Allow the glue to set for five minutes.
- Go back and carefully apply pressure to the entire gasket. This step is crucial for proper adhesion of the tape.
Frequently Asked Questions
Q: Can I reuse the old gasket?
A: It is recommended to replace the gasket with a new one for optimal performance and sealing.
Q: Can I use a different adhesive instead of superglue?
A: It is recommended to use superglue as specified in the instructions for best results and adhesion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>