LIFE SUPER 4 USB-Powered Mini Metal Fan Black User Manual
- July 20, 2024
- LIFE
Table of Contents
LIFE SUPER 4 USB-Powered Mini Metal Fan Black
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the device into
operation and keep the instructions, the receipt and, if possible, the box
with the internal packing. If you give this device to other people, please
also pass on the operating instructions.
USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:
- WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
- CAUTION: This sign refers to possible hazards to the machine or other objects.
- NOTE: This sign highlights tips and information.
SAFETY INSTRUCTIONS
-
Read all instructions carefully and keep them for future reference.
-
Do not use the device for any purpose other than that described in this user manual.
-
This device can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Keep the device and its cord out of the reach of children.
-
Children should not play with the device.
-
Cleaning and maintenance of the device must not be done by children without supervision.
-
To ensure the safety of children, keep all packaging materials (plastic bags, boxes, etc.) away from them.
WARNING: Do not allow children to play with the packaging materials, as there is a risk of suffocation! -
The protective grille is meant to prevent direct access to moving parts when the fan is in use. Avoid contact with any moving parts.
-
CAUTION: To avoid injury, do not insert your fingers between the grilles when the device is plugged in or when it is in operation.
-
Always place and use the device on a dry, stable, flat, horizontal and heat resistant surface.
-
Do not place the device on a small, uneven or any other surface that may cause the fan to tip over or fall.
-
Keep the device away from heat sources, direct sunlight, moisture (never immerse it in liquids) and sharp edges.
-
Do not immerse the device or cable in water or any other liquid.
-
Do not place the device near places where water may fall on it.
-
CAUTION: Do not place clothes or other objects on the fan.
-
CAUTION: Do not use the device near curtains.
-
If you do not intend to use the device, unplug the power cord.
-
Do not leave the device unattended during operation. If you leave the room, always turn off the device. Remove the plug from the power supply.
-
WARNING: Do not use the device if it has been damaged in any way or if there are any visible signs of damage to the device. To avoid possible danger, do not attempt to repair the device yourself. Contact a qualified technician for repair. Use only original spare parts.
-
WARNING: Use only original spare parts. The use of accessories not recommended or sold by the manufacturer of the device may cause hazards.
-
Do not use the device if its surface is cracked.
-
Do not use the device when the cord is frayed, or after it malfunctions, or if it has been damaged in any way.
PARTS IDENTIFICATION
- Activation/deactivation button (ON/OFF)
- Fan blades
- Protection grid
- Support base
- USB power cable
BEFORE FIRST USE
- Read all instructions carefully and keep them for future reference.
- Remove all packaging materials and keep out of reach of children.
- Remove any sticker, protective cover or storage cover.
- Check that the mains voltage you will use matches the operating voltage indicated on the device’s rating label and that they are in correspondence.
OPERATION OF THE DEVICE
-
Place the device in an upright position on a flat and stable surface.
-
Make sure the power button is in the OFF position.
-
Connect the power cable to a computer, laptop, AC adapter or any other USB port. Make sure the plug is properly seated in the USB port.
CAUTION: To avoid overloading a USB port, do not connect the fan to ports that serve multiple electrical devices. -
Switch the power button to the ON position to begin the fan operation.
-
To adjust the tilt angle to the desired position, move the fan body up or down to the desired position.
NOTE: When you connect the fan to a laptop’s USB port, the fan is powered by the laptop’s battery. To avoid battery drain, plug the laptop into power while using the fan.
CAUTION: Connect the device to USB power only. Any other form of power supply may damage the device.
CLEANING
- Always unplug the device from the power supply before cleaning it.
- Use a soft cloth dampened with a mild soap solution to clean it.
- Never immerse the device in water or any other liquid and do not rinse it with tap water. Avoid water or other liquid entering the device.
- Do not let the cable and the device come into contact with water.
- Do not use harsh, abrasive or corrosive detergents or solvents to clean the device and none of the following as a cleaner: petrol, thinners or benzene.
STORAGE
- Remove the charging cable from the power supply and wrap it securely.
- Place the fan in its original packaging and store in a safe, dry place.
DISPOSAL OF APPLIANCE AND ACCESSORIES
- This symbol appearing on the product, its accessories or accompanying manuals indicates- that the product and its electronic accessories should not be disposed of with other household trash.
- In order to avoid possible harmful effects on the environment or health due to uncontrolled waste disposal, please separate these products from other types of waste and recycle them.
- Household users should contact either the store where they purchased this product or their local services for details of where and how they can return these products for environmentally safe recycling.
FOR MORE INFO
- e-mail: info@sun.gr
- www.life.gr