SMART WATER 1647406149 Rain Water Harvesting Tips and Tricks Instruction Manual
- June 3, 2024
- smart water
Table of Contents
SMART WATER 1647406149 Rain Water Harvesting Tips and Tricks
INSTALLATION INSTRUCTIONS
RAIN HEAD TYPE ‘A’ PLANNING
RAIN HEAD TYPE ‘B’ PLANNING
WET CONNECTION SYSTEM
DRY CONNECTION SYSTEM
FIRST FLUSH SYSTEM
TOWN WATER CONNECTION WITH WET CONNECTION SYSTEM
NOTE: USING THIS SYSTEM WILL MEAN YOUR TANK WILL NEVER RUN OUT OF WATER.
MULTIPLE TANK CONNECTION
SIDE VIEW
TOP VIEW
UNDER HOUSE WATER STORAGE SYSTEM
- FLEXIBLE MEMBRANE WATER STORAGE LEVEL AREA UNDER HOUSE
USE OF HEADER TANK TO INCREASE WATER PRESSURE
FACT: TO OBTAIN TOWN WATER PRESSURE, THE HEADER TANK WOULD NEED TO BE 14 METERS HIGH ABOVE THE KITCHEN SINK.
WRONG WAYS TO INSTALL YOUR TANK
- TANK BASE INDERMINED
- UNSUPPORTED PIPE WORK PUTS EXCESS STRAIN ON THE FITTINGS
- ROCKY OR UNEVEN GROUND
- MUST NOT HAVE UNDERSIZED BASE. CIRCUMFERENCE OF TANK MUST BE SUPPORTED
- WOODEN SLEEPERS ARE GENERALL TOO UNEVEN AND UNTRUE TO USE FOR TANK BASE SUPPORT
- DO NOT USE CORRUGATED IRON ON TIMBER BEARERS ON THE GROUND
NOTE
- NEVER INSTALL A WATER TANK ON A SAND BASE.
- IF YOU INSTALL YOUR WATER TANK THIS WAY YOUR WARRANTY WILL BE VOID.
SUPPORT BASES
- NON-RETAINED CRUSHER DUST SUPPORT BASE
- RETAINED CRUSHER DUST SUPPORT BASE
- CONCRETE SLAB SUPPORT BASE
TANK GROUND SUPPORT
NOTE: WATER TANKS INSTALLED THIS WAY MAY VOID YOUR WARRANTY.
NEVER USE SAND AS A TANK BASE
NOTE: SLIMLINE WATER TANKS CAN ALSO BE INSTALLED ON PRECAST CONCRETE SLABS ON A FIRM-LEVEL BASE
Wantirna – Retail Store
- 3 Burwood Highway, Wantirna, Vic, 3152
- 03 9800 2177
- wantirna@smart-water.com.au
Hoppers Crossing – Retail Store
- Shop 9, 428 Old Geelong Road, Hoppers Crossing, Vic, 3029
- 03 8369 6200
- hoppers@smart-water.com.au
Rowville – Head Office
- 13/899 VWellington Road, Rowville, VIC, 3178
- 03 9754 0900
- service@smart-water.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>