Sharkoon SGK50 S2 PBT Mechanical Gaming Keyboard Owner’s Manual

July 17, 2024
sharkoon

Sharkoon SGK50 S2 PBT Mechanical Gaming Keyboard

Product Information

Specifications:

  • Type: Gaming Keyboard
  • Switch Technology: Mechanical
  • Keycap Material: PBT (Polybutylene Terephthalate)
  • Keycap Legend: Customizable
  • Illumination: Yes
  • Adjustable Illumination: Yes
  • Lighting Effects: Customizable
  • Form Factor: Standard Full Size
  • Onboard Memory for Game Profiles: Yes

Product Usage Instructions

Remove Keycaps:
Before removing a switch, first remove the keycap. To do this, place the arms of the keycap puller tool either to the left and right or to the top and bottom of the keycap, and then pull the keycap upwards with careful but constant pressure. Avoid pulling the keycaps from the switch directly with your fingers to prevent damage.

Remove Switches: Instructions on how to remove switches go here.

Install Switches: Instructions on how to install switches go here.

Note on Disposal:
Your product is designed and manufactured with high-quality materials that can be recycled. Please dispose of your old products responsibly according to local regulations to prevent negative
consequences to the environment and human health.

Frequently Asked Questions (FAQ):

  • Q: How do I change the lighting effects on the SKILLER SGK50 S2 PBT?
    A: To change the lighting effects, use the function keys as indicated in the manual. Press Fn + Change Lighting Effect to cycle through different effects.

  • Q: Can I customize the keycap legends on this keyboard?
    A: Yes, the keycap legends are customizable on the SKILLER SGK50 S2 PBT.

  • Q: Is the cable length of the keyboard sufficient for most setups?
    A: The cable length is 150 cm, which should be suitable for most desktop setups.

Specifications

General

  • Type Gaming Keyboard
  • Switch Technology Hot-Swap (Gateron G Pro 3.0 Yellow)
  • Number of Keys 100 ANSI / 101 ISO
  • Keycap Material PBT
  • Keycap Legend Dye Sub
  • Illumination RGB
  • Adjustable Illumination
  • Lighting Effects
  • Max. Polling Rate 1,000 Hz
  • Form Factor 96 % Layout
  • Onboard Memory for Game Profiles ü
  • Capacity of Onboard Memory 256 kB
  • Detachable Cable
  • Weight without Cable 1,023 g
  • Weight incl. Cable 953 g
  • Dimensions (L x W x H) 368 x 121 x 100 mm
  • Supported Operating Systems Windows

Key Properties

  • N-Key Rollover Support
  • On-The-Fly Macro Recording
  • Operating Force 50 ± 15 g
  • Switch Properties Linear
  • Distance to Actuation Point 2.0 ± 0.6 mm
  • Operating Life Cycles of Keys Min. 100 Million Keystrokes

Cable and Connectors

  • Connector USB Type-C
  • Textile-Braided Cable
  • Coiled Cable
  • Cable Length 150 cm
  • Gold-plated USB Plug

Package Contents

  • SKILLER SGK50 S2 PBT, Keycap Puller Tool, Switch Puller Tool, USB Cable (150 cm)

If VIA configuration is not possible through the website at https://usevia.app/, please then use the alternative website at https://via.evove.top/.

Macro Keys

Record Macros
To record macros, first press and hold down the function key and then press the tab key. Once you have done this, the macro keys F9–F10 will start flashing. Press and hold down the function key and press one of these two macro keys to select it for macro recording. In the next step, first press and hold down the function key and then press Caps Lock key. The macro key you selected will now start to light up continuously. You can now start entering your macro actions. You can enter up to 16 individual actions. When you have reached the maximum number of actions, the selected macro key starts to flash and the recording is automatically ended. However, if you would like to end the recording before all 16 available macro actions have been entered, first press and hold down the function key and then press the Caps Lock key to end the recording.

Lighting Effects

Additional Functions

Remove Keycaps

Before removing a switch, first remove the keycap. To do this, place the arms of the keycap puller tool either to the left and right or to the top and bottom of the keycap, and then pull the keycap upwards with careful but constant pressure. Whenever possible, avoid pulling the keycaps from the switch directly with your fingers, as this may damage the switch.

Remove Switches

Once you have removed the keycap from the switch, position the switch puller tool correctly on the tabs of the switch. These are positioned to the front and the back of the switch. Before pulling out the switch, make sure that both tabs are securely pressed with the switch puller tool and that the switch can be removed from the socket without resistance. If necessary, remove the adjacent keycaps to allow the switch puller tool sufficient freedom of movement. After you have removed the keycap, press both tabs of the switch with the switch puller tool and then slowly pull the switch out of the socket. Be sure to always pull vertically from the socket with a straight, upward direction. Avoid pulling in a slanted direction, as this can result in damage.

Install Switches

To install the switches, position the switch so that one tab is at the front and the other tab is at the back. Each pin on the underside of the switch should be pointing exactly to its relevant contact in the keyboard socket. Make sure that the switch is led vertically into the socket opening (at a 90-degree angle to the socket). Installing the switch incorrectly can lead to damage or malfunction of the switch. After you have placed the switch in its socket, push very gently on the switch to secure it in place. Make sure that you do not use too much force, as this can damage or destroy fragile components.

Note

  • Legal Disclaimer
    • For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability.
    • All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected.
    • As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary.
    • All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means.
    • Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.

Disposal of your old products
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU.

Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.

Follow us on social media!

Sharkoon Technologies GmbH
Grüninger Weg 48
35415 Pohlheim
Germany
© Sharkoon Technologies 2024

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals