Handi Quilter HQ Amara 20 Inch Longarm Quilting Machine User Manual

Handi Quilter HQ Amara 20 Inch Longarm Quilting Machine

Product Information

The Handi Quilter 20-Inch and 24-Inch Longarm machines are advanced quilting machines designed to provide a superior quilting experience. They come with a touchscreen display for easy operation and are equipped with features to enhance your quilting projects.

Specifications

• Product: Handi Quilter 20-Inch and 24-Inch Longarm
• User Manual Version: 1.5

Product Usage Instructions

Congratulations on Your Purchase!

Upon purchasing this quilting machine, you have joined the Handi Quilter family. The machine is the most advanced in the market and offers various functionalities to help you create beautiful quilts.

What’s Included with Your Machine

Ensure you have received all the components mentioned in the user manual. If anything is missing, contact Handi Quilter for assistance.

Important Safety Information

Before using the machine, read all safety instructions provided in the manual. Follow basic safety precautions to prevent electric shock, burns, fire, or injury.

Safety Precautions

• DANGER – To reduce the risk of electric shock:
• WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

FAQs

• What should I do if I encounter issues with my machine?

  • If you encounter any issues with your Handi Quilter Longarm machine, contact your local HQ authorized retailer for assistance.
    If they are unavailable, reach out to Handi Quilter directly via email at HQCares@HandiQuilter.com or by phone at 1-877-697-8458 or 1-801-292-7988.

• How do I access additional resources?

  • For more information and resources, visit the Handi Quilter website at www.HandiQuilter.com or check for online videos for tutorials and tips on using your quilting machine.

HANDI QUILTER 20-INCH AND 24-INCH LONGARM
USER MANUAL
Version 1.5
HQ Amara User Manual | 1

USER MANUAL
20-INCH AND 24-INCH MACHINES
VERSION 1.5
© 2024 Handi Quilter, Inc. All rights reserved. The information contained in this document is subject to change without notice. If you find any problems in the manual, please report them to us in writing. This document is not warranted to be error-free. Handi Quilter, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this manual. Handi Quilter®, HQ AmaraTM, Handi FeetTM, Easy-Set TensionTM and Pro-Stitcher® are either trademarks or registered trademarks of Handi Quilter, Inc. Digital tensioner U.S. Patent No. 8,997,669. Square Feet U.S. Patent No. 10,612,173. Printed in the United States of America. Version 1.5 06/2024

4 | www.HandiQuilter.com

Congratulations on Your Purchase

You haven’t just purchased a quilting machine, you’ve joined the Handi Quilter family and we welcome you. You have acquired the most advanced quilting machine available in today’s market.

Handi Quilter is committed to innovation, reliability, customer service, and education. Our machines are Designed by a Quilter, for Quilters® and we are committed to your quilting success. With that in mind, we invite you to bookmark our website: www.HandiQuilter.me and invite you to visit to learn more about the art of quilting.

We’ve posted videos on subjects as diverse as Oiling Your Machine to Loading a Quilt to Making Perfect Feathers. Your new quilting friends are already there, waiting for you! Remember, if you ever have questions, your local HQ authorized retailer can help you. If the retailer is not available, contact Handi Quilter directly at HQCares@HandiQuilter.com or by calling us, Monday through Friday, 8:00 AM to 5:00 PM Mountain Time (1-877-697-8458 or 1-801-292-7988).

Keep the carton and packing materials. You will need them if you need to return the machine to the retailer or send it for repair. If you don’t pack the machine properly or if you don’t use the correct packaging materials, the machine could be damaged. Handi Quilter is not liable for damage that occurs during return shipping.
 IMPORTANT: These packaging materials are designed to prevent the machine from being damaged. Keep them in case you need to bring this machine to the dealer or send it for repair.

What’s Included With Your Machine

· HQ AmaraTM Quilting Machine 20 inches or 24 inches (including carriage, front handlebars, front display, handlebar cable)
· Bobbins (5) · Bobbin case · Needle (134) size 100/16 (pack of 10) · Needle (134) size 110/18 (pack of 10) · Thread tray and thread mast · EZ Pen Oiler · Power cord · Screwdriver · 2 mm hex wrench · 2.5 mm hex wrench

· 3 mm hex wrench · 5 mm hex wrench · Open-toe Handi Foot (closed-toe foot installed) · HQ Longarm Quilting Pins · HQ and Amara decal sheet · Quick Reference Card · HQ Bobbin Winder

HQ Amara User Manual | 5

Important Safety Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See the full Declaration of Conformity in the Appendix.
 IMPORTANT: Do not operate your Amara quilting machine until you have completely read the information contained in this manual. Please keep all packaging and order information for warranty purposes.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this machine.
When using this machine, basic safety precautions should always be followed, including the following:
DANGER — To reduce the risk of electric shock:
· A quilting machine should never be left unattended when plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.
WARNING — To reduce the risk of burns, fire, electric shock, or injury to persons:
· The Amara is heavy. Never attempt to lift it alone. Always use two people when lifting. Always lift from the throat of the machine, not from the handlebars.
· Always unplug the Amara from the electrical outlet when performing any maintenance, changing the needle, removing thread locks, or when left unattended.
· Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. · Keep fingers away from all moving parts. Use caution around the needle or sharp external
components. · Change the needle often. Do not use bent or dull needles. “Every quilt deserves a new needle”. · Switch the machine to the symbol off, or 0, position to turn it off when making any
adjustments in the needle area, such as threading needle, changing needle, threading bobbin, changing hopping foot, and so forth. · Never drop or insert foreign objects into any opening. · The Amara should only be used indoors away from moisture. · The Amara should not be stored or used in extreme temperatures. · Use the Amara only for its intended use as described in this manual.
6 | www.HandiQuilter.com

· To disconnect from the wall outlet, push the switch to the off position, then remove the plug from outlet pulling from the plug, not the cord. Never operate the Amara if the cord is damaged or not working correctly. If a mechanical or electrical problem is encountered, return the Amara to the nearest authorized service center or the manufacturer for examination, repair, electrical, or mechanical adjustment.
· It is not recommended that the Amara quilting machine be used with any machine quilting frame other than those recommended by Handi Quilter.
· Use this quilting machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.
· Never operate the machine with any air openings blocked. Keep ventilation openings of the machine free from the accumulation of lint, dust, and loose cloth.
· Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
· Do not pull or push the machine across the fabric excessively while stitching. It may deflect the needle enough to cause it to break.
· Use only needles designed for free motion quilting and recommended by Handi Quilter for this machine. Other types of needles may be break during normal quilting.
· Children shall not play with the machine. Close attention is necessary when this machine is used by or near children.
· This sewing machine may be used by children age 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and understand the hazards involved.
· Cleaning and user maintenance shall not be made by children without supervision.
Save these instructions
This machine is intended for household or commercial use.
Disclaimer
Handi Quilter and its Retailers are in no way legally responsible or liable for damage to the Amara when used improperly or not in accordance with the guidelines stated in this manual or when used on machine quilting frames not recommended by Handi Quilter.
HQ Amara User Manual | 7

To use the machine safely
1. Carefully watch the needle when sewing. Do not touch the hand wheel, take up lever, needle, or other moving parts.
2. Turn the machine off and unplug the cord in the following cases: · when you have stopped using the machine
· when you replace or remove the needle or any other part
· when you check or clean the machine
· when you leave the machine unattended 3. Connect the machine directly to the wall outlet or to a surge protector that connects
directly to the wall outlet. Do not use extension cords.
To increase the life of your machine
1. Do not store this machine in areas exposed to direct sunlight or high humidity. Never use or store the machine near a heater, an iron, a halogen lamp or other hot things.
2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring powders can damage the case and the machine and therefore should never be used.
3. Do not drop or bump the machine. 4. Always consult the manual to replace or fix the hopping foot, needle or any other part of the
machine. If necessary contact an authorized Handi Quilter retailer or Handi Quilter technical support.
To repair or adjust the machine
If the machine breaks down or needs adjustment, first check the troubleshooting chart in the appendix to inspect and adjust the machine yourself.
For more product information and updates, visit our website at www.HandiQuilter.com.
The contents of this manual and product specifications are subject to change without prior notice. Check for updated manuals at www.handiquilter.com/manuals/.
10 | www.HandiQuilter.com

Recommended Use and Storage
1. It is recommended that our products be operated within in a temperature range of 60°F to 90°F.
2. Store products in a climate-controlled environment with the following provisions: · Store machine in the original packaging, which contains the internal supports designed specifically to maintain and protect the machine during transport or storage. · Detach cables and accessories before packing. · To best protect your electronics, store them in the original packaging, especially any that arrived in antistatic containers.
3. Storage or use in an environment other than what is recommended may result in · Damaging condensation · Rust · Premature wear · Overheating · Poor performance · Shortened battery life
4. The tablet warranty, if applicable, is VOID if the tablet is stored in temperatures below 32°F or above 110°F. Do not leave the tablet in a vehicle or other enclosed space where the temperature may exceed 110°F.
5. If the product is stored at a temperature above or below the recommended operating range, allow the machine to acclimate to the operating environment before use.
HQ Amara User Manual | 11

About Your Machine

General Specifications
The Amara uses high-tech electronics and an innovative touchscreen user interface to offer greater functionality and ease of operation to home quilters than ever before conceived in the quilting industry. The Amara quilting machine is a high quality machine that both incorporates robust design features and is easy to service.

Sewing Opening Dimensions Amara 20 Amara 24
Sewing Speed

(228 mm X 521 mm) 9 inches X 20.5 inches (228 mm X 521 mm) 9 inches X 24.5 inches
Manual Mode: from 25 stitches per minute to 2500 stitches per minute Regulated Mode: from 0 stitches per minute to full speed

Stitches Per Inch Needle System

4 stitches per inch to 24 stitches per inch
Basting mode: one stitch per quarter inch, one stitch per half inch, one stitch per inch, one stitch every two inches, and one stitch every four inches
134

Needle Sizes (recommended)
Hook System

From 80/12 to 130/21 Rotary, Horizontal Axis, M-class bobbin

Bobbin Type

Aluminum, Class M

Bobbin Case

Type MF

Motor Type

Brushless DC

12 | www.HandiQuilter.com

Needle Positioning Electrical Power
Outlet Power Sew Foot Stroke/Lift Needle Bar Stroke Take-Up Stroke Lubrication, main components Lubrication of hook

Up and down, walking stitch, on-screen hand wheel
100-240 VAC, 50-60Hz, 1.5-3.3A This machine conforms to UL and international safety standards for sewing machines and US and international laws for electromagnetic compliance. 120 watts maximum 5 mm
35.3 mm
73 mm
Kluber Lube, permanent
Velocite 10, Texaco 22

HQ Amara User Manual | 13

Get to Know Your HQ AmaraTM
Left side view (picture shown with optional rear handlebars)
1

5

2 3

4

7

8

9

6

12

10

11

1. Rear display (optional accessory) 2. Rear handlebars (optional accessory) 3. Machine “Y” encoder 4. Front on/off switch 5. Front display 6. Front handlebars
Close-up view of needle area
7. Needle stop/sight hole 8. Needle bar clamp screw 9. Needle bar thread guide 10. Needle 11. Hopping foot 12. Needle plate
14 | www.HandiQuilter.com

Right side view (picture shown with optional rear handlebars)

16

17

18

13

15

14

19
13. Hand wheel 14. Thread tray 15. Spool pins 16. Thread mast 17. Thread guide 18. Magnetic Tool Minder Collar 19. Ruler base mounts
Close-up view of tension assembly area
20. Three-hole thread guide 21. Thread guide 22. Top tension assembly with take-up
spring 23. Thread stirrup 24. Take-up lever 25. Thread break sensor 26. Lower thread guide

24

20

21

22

25 23

26

HQ Amara User Manual | 15

Back Panel (picture shown with optional rear handlebars)
27 28 29 30 31

32 33

34 35

36

37

Display Connections 27. Rear display power outlet (not used) 28. Rear display power and communication (#28 to #32) 29. Rear handlebar to machine connection (#29 to #34) 30. Rear display audio jack(not used) 31. USB stick connection (for updating rear display)
Machine Connections 32. Machine rear display connection (#28 to #32) 33. Machine power connection 34. Machine to handlebar connection (#29 to #34) 35. Machine to Pro-Stitcher communication 36. Auxiliary power 37. Main on/off power switch connection
Rear Side Connections 38. X-carriage encoder connection (top) 39. Laser connection (bottom) 40. USB auxiliary power connection (bottom) 41. Y-machine encoder connection (top)

16 | www.HandiQuilter.com

40 41

38 39

Installation and Setup

Carriage
You should have already set up your quilting frame. Refer to the frame manual for detailed instructions to set up the frame.
 IMPORTANT: If applicable, make sure the frame is set up for a 20/24-inch machine, not a 16/18-inch machine.
To install the carriage and machine on the frame
1. Place the carriage on the table tracks, ensuring that the stitch regulator faces the back of the frame.
2. Place the machine on the carriage. U CAUTION: The Amara is heavy. Never attempt to lift it alone. Always use two people when lifting. Always lift from the throat of the machine, not from the handlebars, needle bar area or needle bar.
3. From the back of the machine, plug the carriage stitch regulator cable into the top round jack on the left hand side of the machine.
4. Plug the machine stitch regulator cable into the top round jack on the right hand side of the machine. Â IMPORTANT: If you ever need to remove the machine from the carriage, disconnect the stitch regulator cable from the machine. Failure to unplug the cable when removing the machine from the carriage could result in damage to the cable, encoders, and carriage.
U CAUTION: Never plug or unplug the stitch regulator cables or any other cables while the quilting machine is turned on, as this could potentially cause electrical damage to the machine.
HQ Amara User Manual | 17

Power Cord
To install the power cord · Insert the cord into the power connector on the rear of the machine. Plug the three-prong end into power source. Do not turn on the machine until the handlebars and display are installed.
To disconnect the power cord · Push in on the red buttons on the end of the cord that connects to the machine; then pull out the cord.
For more information, see Power Switch in the Using Your Machine section of this manual. NOTE: Make sure that the machine is off before plugging into a power source. The rear power switch should be in the 0, or off, position.
Front Handlebars
The Amara comes with handlebars at the front of the machine. Optional back handlebars are available for pantographs and Groovy or pattern boards. The front handlebars will be used for most other quilting activities. The front handle bars can be independently adjusted. This allows you to have one handle up and the other down or adjust them to any number of variable positions.
For more information about using the touchscreen displays, see Using the Touchscreen Displays later in this section of the manual.
U CAUTION: To prevent any electrical damage to the handlebars, always turn off all power to the machine when connecting or disconnecting the handlebars.
To install the front handlebars
1. Locate the special cone shaped wedge, the M6 x 45mm hex screw, and 6mm flat washer.
 IMPORTANT: Four handlebar lever bolts are provided for you to use and come preassembled on your handlebar. These enable you to easily hand-loosen the handlebars to adjust the angle of the handlebars to switch between regular quilting and micro quilting.
18 | www.HandiQuilter.com

2. From the front of the machine, bring the handlebar set up into the “U” shaped slot in the machine casting located behind and below the top tension assembly.
3. Looking through the hole found on the left side of the machine just above the “U” shaped cutout, locate and align the threaded hole on the handlebar bracket.
4. Place the wedge and M6x45 hex screw with washer into hole and start the screw into the threaded piece with your fingers. Once the screw is nicely started into the handle bar, firmly tighten the screw with the provided 5mm socket tool.
5. Connect the handlebar’s USB mini B cables into the side of the machine. Connect the longer cable coming from the handlebar to the bottom connector on the machine and the shorter cable to the closer upper machine connector.
HQ Amara User Manual | 19

6. Each side of the handlebar can be individually adjusted forward or backward to a comfortable position for quilting. Loosen and tighten the handlebar lever bolt closest to the machine body. Fully hand-tighten the levers once in the desired position. Each side can also be adjusted in and out and rotated up or down as desired using the lever closest to the handle control switches.
To adjust the hand-position angle of the front handlebars
Rotate the angle of the handlebars to a comfortable position by using the two levers below the handlebars.
ONLINE: For more information about adjusting the front handlebars, watch the video Adjusting the Handlebars at: https://youtu.be/kuTCO-dV4zw.
· Loosen the levers by turning them counterclockwise. Then grasp the front of the handlebars and adjust them inward or outward to a comfortable position. Tighten the levers by turning them clockwise when you are happy with the position.
To use the handlebars for micro quilting ONLINE: For more information about adjusting the front handlebars for micro quilting, watch the video Micro Quilting at: https://youtu.be/ZNYy84Cak-M.
When micro quilting, you’ll want to have your hands (and therefore, handlebars) close to the quilt top. In addition to adjusting the angle of the handlebars, you can adjust the distance from the quilt.
· Use the back handlebar lever bolt to loosen the handlebar that you would like to adjust. Grasp the handlebar and tilt it closer to the quilt until it is at a comfortable position. Repeat with the other handle as desired. Then tighten the handlebar lever bolt.
NOTE: The handle bar lever bolt is spring loaded and can be pulled out and located in a different position if desired.
20 | www.HandiQuilter.com

Configurable Handlebar Buttons

The Amara handlebars are configurable; you can decide which functions you want the buttons to operate. Once configured, the front and back handlebars work the same.

The machine comes from Handi Quilter configured to have the right handlebar control starting and stopping quilting, and increasing stitching speed in Manual mode or stitches per inch in Regulated mode. The left handlebar controls cycling the needle up and down, and slowing the stitching speed or decreasing stitches per inch. You can switch the functions from one side to the other when you set up your machine.
NOTE: It is important to note that you will not be able to switch the handlebar buttons to match the switched configuration.

You can also select from several functions and assign one to the star button and another to the diamond button. For example, choose to have the diamond button perform a tie-off and the star button perform another desired function.

Increases or decreases stitching
speed (Manual mode)

Increases or

decreases

stitches

per inch

Cycles the

needle up or

down

Configurable button

(Regulated mode)

Starts or stops Configurable stitching

button

For more information about configuring the handlebars and buttons, see To customize the handlebar buttons in the Toolbar Options section of this manual.

HQ Amara User Manual | 21

Optional Accessory: Quilt from the Back Kit
ONLINE: For more information about installing the rear handlebars, watch the video Quilt from the Back Kit at: https://youtu.be/2ijNHiIjT6Q.
1. Locate the four 4mm hex screws for the rear handlebars and the 4mm hex wrench.
2. Align the four holes in the handlebars with the holes on the back of the machine.
3. Slide the bolts into holes until they stop. Use the 4mm hex wrench to firmly tighten the bolts and securely fasten the handles to the back of the machine.
4. Connect one end of the RJ45, or network style, phone cord into the handlebars and the other end into the machine’s back panel.
5. Install the back handlebar display to the handlebar with the four small screws using the 2.5mm hex tool.
Connect the USB mini B connector to the back of the machine. You will need the other end for the display later. Note that this cable powers the display. The round power input to the display is not used.
NOTE: After installing and plugging in the handlebar(s) and the touchscreen display(s), plug in the power cord and test them by turning the machine on, using the rear power switch and then the power button on the front left side of the machine. If nothing appears on the touchscreen(s), check that the handlebar cable(s) are plugged in securely, that your machine is turned on, and that the power cord is plugged into the machine as well as into a power source. If everything is working, turn off and unplug the machine and continue the installation.
22 | www.HandiQuilter.com

Touchscreen Displays

The Amara comes with one 7-inch touchscreen front display. If you have purchased the optional Quilt from the Back Kit, a second indentical display will be included.
To install the front display 1. For the front display, locate the four 4-40 screws and a small Phillips screwdriver (not
provided). You’ll also need the display with the hinges attached to the bottom row of connectors on the back of the display.
2. Insert the 4-40 screws into the openings on the display’s metal hinge. Align the screws in the hinge with the holes on the display bracket. Use the small Phillips screwdriver to fully tighten the screws.
3. Plug the USB mini B cable (with 90° connection), coming out of the top front cover, into the bottom of the display. This cable provides power and signal connection from the machine to the display. The USB connection on the bottom right of the display is used for updating the display and the machine software. Â IMPORTANT: Note the other connections on the bottom of the display for power and audio are not functional. Also the SD card slot on the left of the display is not used at this time.
 IMPORTANT: If you have Pro-Stitcher, you will install the Pro-Stitcher tablet computer to the front of the machine instead of the 7-inch display. See the instructions that come with Pro-Stitcher for more information about installing the tablet computer.
HQ Amara User Manual | 23

To install the optional rear display ONLINE: For more information about installing the optional rear display, watch the video Quilt from the Back Kit at: https://youtu.be/2ijNHiIjT6Q.
1. Locate four 2.5mm hex screws and the 2.5mm hex wrench. You’ll also need a display with the hinges attached to the bottom row of connectors on the back of the display, plus the USB mini B cable with 90° connector on one end. NOTE: If you do not have 2.5mm hex screws then you will have 4-40 screws for the rear handle bar hinges.
2. Insert the screws into the openings on the display’s metal hinge. Align the screws in the hinge with the holes on the display bracket. Use the 2.5mm hex wrench or Phillips screwdriver as required to fully tighten the screws.
3. Plug the USB mini B cable with 90° end into the rear display and the straight end into the rear panel of the machine. NOTE: The USB port on the right of the display is used when updating.
24 | www.HandiQuilter.com

Thread Tray and Thread Mast
To install the thread tray on the machine 1. Locate the two small M4x10mm hex button head screws and the thread mast assembly.
2. Align the screws in the thread mast bracket with the two holes in the side of the machine (top tension side). Use a 2.5mm hex tool to tighten the bracket firmly to the side of the machine.
Optional Accessories
Steady-Fit Ruler BaseTM
If you plan to use rulers and templates with the Amara, you will need to purchase the ruler base to give you a large, stable surface on which to rest the ruler or template. The ruler base and rulers and templates are optional accessories. For more information, visit http://www.handiquilter.com.
To install the ruler base ONLINE: For more information about installing the ruler base and using rulers, watch the video Ruler Base Installation at: https://youtu.be/tedcvv_NB9g.
1. The Amara machines come with four preinstalled mounts for the ruler base.
2. With the Steady-Fit Ruler BaseTM tilted down about 30°, align the back ruler-base hooks with the machine mounts until they are about to catch, then lower the front of the ruler base until the front hooks align and catch, also. With all four ruler-base hooks aligned and started onto the machine mounts, push the ruler base back into the final position.
HQ Amara User Manual | 25

To remove the ruler base
· Grasp the front corners of the ruler base, pull the ruler base towards you and then up on an angle off the machine.
To use rulers and templates with your quilting machine
U CAUTION: Use only 1/4 inch thick rulers with your machine. Do not use rotary-cutting rulers; they are too thin and can easily slip under the hopping foot. Always use the SteadyFit Ruler BaseTM to stabilize the ruler.
Keep the ruler flat and quilt only where the ruler is held securely. Avoid losing control by walking your hand along the ruler or stopping and repositioning your hand and/or the ruler.
· Quilting with rulers requires gentle three-point pressure as follows: 1. Position and press the ruler against any side of the hopping foot. 2. Press machine against ruler. 3. Press ruler against ruler base with only as much force as is necessary to keep the ruler from slipping. Too much pressure will keep the machine from moving.
The quilting line will be approximately 1/4 inch away from the ruler edge. The markings on all Handi Quilter rulers take this into consideration.
NOTE: Set the machine to stop in the needle-down position to keep the machine from moving while making adjustments with the ruler.
26 | www.HandiQuilter.com

Rear Laser Stylus
The laser light (for use with pantographs) is installed on a mounting post. The post is threaded into a hole on the machine casting. The hole is found towards the back of the machine on the free arm about 3 inches in front of the rear wheel. To install the mounting post and laser stylus
ONLINE: For more information about installing the optional rear laser light, watch the video Laser Light Mounting at: https://youtu.be/xb-IWao8gec.
1. Locate the mounting post with nut and washer, the laser stylus, and the 8mm combo wrench. 2. Remove the nut and washer from the
mounting post. Place the nut all the way onto the mounting post and then the washer (to protect the machine paint). Thread the post into the tapped hole on the machine all the way and then fix its position by tightening the nut.
3. Slide the laser clamp onto the mounting post and tighten the two knobs on opposite sides of the clamp.
HQ Amara User Manual | 27

4. Plug the laser cable end into the laser stylus port on the back of the machine. This is found on the tension side of the machine inset in the rectangular shaped opening.
The laser projects a straight laser beam visible as a dot on surfaces it hits. The laser dot is used as a guide or stylus enabling you to use printed pantograph designs and stitch the pattern onto a quilt by tracing the design with the laser dot. The laser attaches to a mounting post which attaches to the machine. The laser stylus can move in any direction by rotating the clamp on the post and pivoting the laser up or down. To make an adjustment, simply loosen the black thumbscrews, position, and re-tighten.
 IMPORTANT: A label is attached to the laser’s case and contains an arrow which indicates the direction of the laser light when energized. The label must remain in place on the laser. Removing the label voids the laser’s warranty.
Laser focus and image size Focus the laser by turning the threaded housing surrounding the lens clockwise or counterclockwise. The laser image can be adjusted to project a bigger or smaller dot, or focal size. The direction of rotation needed is determined by the distance of the laser from the pantograph surface. Experiment by rotating the threaded end to achieve your desired focal size. Laser operation and safety Unplug the laser from the back of the machine to turn it off. Be sure the laser is attached to the machine and pointed downward toward the table before connecting it to the port. Never point it in a direction that would project the beam into someone’s eyes. If the laser should stop working, ensure the plug is firmly seated into the Amara laser port.
28 | www.HandiQuilter.com

When using the laser stylus, observe the following basic safety precautions. · Never shine directly into the eyes. · The laser stylus should never be left on and unattended. · Do not use the laser stylus as a toy. · Pay close attention when the laser stylus is being used by or near children or pets. · Use the laser stylus only for its intended use as described in this manual. NOTE: If you can’t see the threaded housing, the lens may be threaded too far into the laser body. You will need to use a large slotted screwdriver to turn it counter clockwise until the housing is visible. You can then rotate it with your fingertips to bring the light into focus. Be very careful to not scratch the lens when using the screwdriver. U CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Machine Head USB Port (included)
To be used to power accessories, NOT for programming, which is done through the USB port on the front display.
ONLINE: To see how to use the machine head USB port, watch the video Machine Head USB Port at: https://youtu.be/0Gu_SYrQpu4.
Horizontal Spool Pin
ONLINE: To see how to install the horizontal spool pin, watch the video Spool Pin at: https://youtu.be/FoqZssJZxP4.
HQ Amara User Manual | 29

Using Your Machine

Power Switch
There are two power switches for your machine. The main power switch is at the rear of the machine and another power switch is at the front of the machine for added convenience.
The machine is turned on when both switches are turned on. The machine is turned off when both switches are off. However, you may turn off the machine functions by turning off only the front switch if you will be returning to quilting within a day.
Turn on the back switch first by toggling the switch from the 0 position to the 1 position. Then turn on the front switch by pressing it. The front switch will not turn on the machine unless the back switch is already on.
 IMPORTANT: If you will not be using the machine for more than a day, we recommend you turn off both switches and unplug the power cord from the power source.
 IMPORTANT: Refer to the safety instructions.
Lighting
The Amara includes several lights to make it easy for you to see your quilting area: two lights under the throat of the machine that provide lighting to the quilting area and a light ring that illuminates the needle and stitching area. There is also a bobbin area light. Optional UV lights will be available as an accessory for purchase. UV lights are helpful when you need to see white thread or white chalk on white fabric.
Turning the lights on and off is done through the touchscreen display. For more information about turning on the machine lights, see To control the lights on the machine in the Toolbar Options section of this manual.
Magnetic Tool Minder Collar
Use the left side of the collar to store steel tools, such as mini scissors, close at hand. ONLINE: To see how to use the magnetic tool minder collar, watch the video Magnetic Tool Minder Collar at: https://youtu.be/pbldz-dvOHk.
30 | www.HandiQuilter.com

Machine Needle
Use only the recommended needle system for your Amara quilting machine. The machine was timed to use this specific type of needle (System 134) and it is designed to work with the high quilting speeds and multi-directional stitching the Amara offers. The Amara uses the 134 needle system. Note that the needle has a round shank rather than a shank with a flat side like home sewing machines use. If you use the recommended needle, you will experience:
· Fewer skipped stitches · Less needle breakage · Less thread breakage, especially at high speeds · Less thread splicing or shredding · Optimum fabric protection
 IMPORTANT: Change the needle regularly. We recommend you use a new needle for each new quilt and any time the needle becomes bent, dull, or burred.
U CAUTION: A damaged needle may result in poor stitching quality or may even damage the machine or your quilt.
To change the needle ONLINE: For more information about replacing the needle, watch the video Replacing the Needle at: https://youtu.be/E4VvU6rJlAI.
1. Move the needle bar to the up position by pressing the needle up/down control on the handlebar.
2. Turn off all power to the machine.
HQ Amara User Manual | 31

3. Loosen the needle bar clamp screw with

the 2.5mm hex wrench.

Sight hole

Needle bar clamp screw

4. Remove the old needle by pulling it down. Discard the old needle in a safe way.

5. With the scarf of the needle (indentation at the back of the needle just above the needle eye) facing the rear of the machine and the long groove down the front of the needle facing the front of the machine, push the needle all the way up into the needle bar until it stops. Check the sight hole in the needle clamp to verify that the top of the needle can go no farther up.

Scarf at back of needle just above eye
Long groove at front of needle – shoulder to eye

U CAUTION: Check the needle to confirm it is fully inserted. The needle bar has a sight opening above the needle bar clamp screw. Make sure the needle is touching the top of the sight opening. If it isn’t, the machine timing will be off and it may be possible for the needle to collide with internal parts, causing damage not covered by warranty.
6. Carefully tighten the needle bar clamp screw.

U CAUTION: Although you can use your fingers to tighten the needle bar clamp screw, we recommend that after finger-tightening the screw, you use the 2.5mm hex wrench to tighten it just a bit more. The Amara runs at very high speeds and this ensures the needle will not loosen while quilting. However, do not over tighten the needle clamp screw, as this may strip the threads of the screw. Stripped threads are not covered under the warranty. It may also become difficult to insert the needle properly into the needle bar. Once the screw no longer turns freely by hand, gently turn the screwdriver until the screw is tightened snuggly.

32 | www.HandiQuilter.com

Needle Size
12 and 14 16
18 19 and 21

Thread Size
monofilament, 100 wt. silk, 60 wt. polyester, mylar monofilament, mylar, 100 wt., 80 wt., 60 wt., 50 wt., 40 wt. silk, polyester and cotton thread 40 wt. cotton and polyester, 30 wt. cotton and polyester Any thread 30 wt. and heavier such as 12 wt., 19 wt., 30 wt.

QUILTING TIP: A size 16/100 needle will accommodate most threads and fabrics. Heavier threads, such as top stitch and some decorative threads, require a larger needle such as 18/110 or 21/130. Lofty batts and heavier fabrics such as denim, canvas, or densely woven fabric may also require a larger needle.
Hopping Feet
Your machine comes with two hopping feet: a closed-toe foot (comes installed) and an open-toe foot. Use the closed-toe foot for everyday quilting, the Sure Foot for ruler work, and the open-toe foot when you need greater stitch visibility (such as when you are micro quilting).
ONLINE: For more information about changing the hopping feet, watch the video Changing Handi Feet at: https://youtu.be/NYaOD9me1l0.
To change the hopping foot
1. Raise the needle and foot to their highest position. Remove the foot that is on the mount by using the 2.5mm hex wrench to loosen the mounting screw far enough that you can slide the foot off of the mount.
2. Slide the desired foot onto the mount. Note that the opening on the side of the foot is lined up with the screw hole. Push the foot up as far as it will go.

HQ Amara User Manual | 33

3. Fully tighten the screw with the 2.5mm hex wrench.
NOTE: Before threading the needle, test that the machine is threaded properly and the tension is correct by carefully pulling the top thread. It should pull smoothly with light to medium tension. If thread pulls freely with no tension, rethread the machine, ensuring that the thread is flossed into the tension discs.
 IMPORTANT: The Amara does not have a presser foot lever or top tension release like a home sewing machine. On a home sewing machine the top tension is released when the presser foot is raised, allowing the thread to come freely out of the machine. When a home machine is threaded the tension discs are released and open to allow the thread to easily fall between the tension discs. This isn’t the case with the Amara quilting machine. The top tension is always engaged and the tension discs are never open. Therefore the thread must be pulled up, or flossed, between the tension discs or it will stay outside the discs and float without tension, causing serious tension problems and/or thread nests.
Optional Accessory: Handi Feet
ONLINE: For more information about changing the Handi Feet, watch the video Changing Handi Feet at: https://youtu.be/NYaOD9me1l0.
ONLINE: For more information about optional HQ Handi Feet, watch the HQ Live video HQ Live – Mary Beth Krapil at: https://youtu.be/AEREeMa9wDg.
Bobbin and Bobbin Tension
The Amara quilting machine uses M-class bobbins that are larger than home sewing machine L-class bobbins. The larger bobbins hold more thread and enable you to quilt for a longer time between bobbin changes.
The Amara also has a low-bobbin alarm. For more information about the low- bobbin alarm, see To configure the low-bobbin alarm settings in the Toolbar Options section of this manual.
34 | www.HandiQuilter.com

To wind the bobbin
The Amara comes with a separate bobbin winder. For full instructions about using the bobbin winder, see the instruction manual that is packaged with the bobbin winder.
ONLINE: For more information about using the bobbin winder, watch the video Using the Bobbin Winder at: https://youtu.be/xDpQMYdzftI.
To insert the bobbin into the bobbin case ONLINE: For more information about inserting the bobbin and adjusting bobbin tension, watch the video Bobbin Tension at: https://youtu.be/3j25v5P7a5U. U CAUTION: To prevent personal injury, always turn off the front power switch while inserting and/or removing the bobbin case or anytime your hands are near the needle area, such as when you change the needle.
1. Place the bobbin in the bobbin case so that the thread pulls off clockwise when viewing the open side.
2. Slide the thread through the slot and under the tension spring, leaving approximately five to six inches of thread hanging loose.
To test bobbin tension
The bobbin tension is the foundation for stitch tension. Always set the bobbin tension first. NOTE: Check the bobbin tension each time a new bobbin is inserted.
1. With the bobbin properly in the bobbin case, hold the bobbin case in the palm of your hand with the open end facing up.
2. Wrap the thread two to three times around the index finger of the opposite hand and attempt to lift the bobbin up by the thread. The bobbin case should stand up on its side, and slightly lift out of your hand. If the bobbin will not stand up on its side, the bobbin tension is too loose. If it lifts completely out of your hand and hangs by the thread, the bobbin tension is too tight.
HQ Amara User Manual | 35

To adjust the bobbin tension · Make the adjustment using the screw in the
center of the tension spring. (The larger of the 2 screws) Turn clockwise to tighten and counterclockwise to loosen the tension. Make tiny adjustments to the bobbin tension and test again.
To insert the bobbin case into the machine 1. Move the needle to the up position. Turn off the power to the machine using the front button. 2. Place the bobbin in the bobbin case so that the thread pulls off clockwise when viewing the
open side. 3. Slide the thread through the slot and under the tension spring, leaving 5 to 6 inches of thread
hanging loose.
4. To fit the bobbin case onto the hook spindle in the machine, orient the bobbin case as shown in the photo with alignment notch to the right. Push the bobbin case inward until it clicks into place.
NOTE: Do not insert the bobbin case into the machine by lifting the lever on bobbin case. Use the lever only for removing the bobbin case.
36 | www.HandiQuilter.com

Easy-Set TensionTM
One of the joys of quilting with the Amara is its ability to handle many different types of thread. You can quilt with almost any high-quality thread as long as you first adjust the bobbin tension and then adjust the top tension to suit the thread you’ve chosen.
Puckering, gathers, and thread breakage occur when the top tension is too tight. Loops and thread nests occur when the top thread tension is too loose. Tension may need to be adjusted depending on the fabric, thread, or batting you are using on the project.
NOTE: Top tension should be adjusted after the bobbin case tension adjustment is made.
NOTE: Dark threads will be thicker (because of dye) than light threads of the same weight and may require a tension adjustment. The type or brand of thread may also affect tension settings. Each time you change threads, you should check your tension.
ONLINE: For more information about adjusting the top-thread tension, watch the video Adjusting Top Tension at: https://youtu.be/SsmlW0xpPo4.
 IMPORTANT: Before adjusting your top tension remember to floss the top thread up between the tension discs or it will float outside the discs providing little or no top tension. This could cause significant tension or thread nesting problems.
QUILTING TIP: Test the tension settings before quilting. The best way to make sure the top and bottom tension settings are balanced is by quilting. Keep 4-inch squares of light solid fabric on hand to place at the side of the quilt on the extra batting and backing. Then quilt some loops and swirls and look at the stitches on top and underneath to ensure the tension looks good. Fine tune the tension as needed.
To adjust the top tension 1. Test stitching with a scrap of fabric placed on the extra batting and
backing at the side of the quilt.
2. Adjust the tension by turning the tension dial clockwise to tighten and counter-clockwise to loosen. The tension value appears on the touchscreen. The value changes as you turn the tension dial.
3. Continue to test the stitching on the fabric scrap and adjust by turning the tension dial until you are happy with the stitches.
HQ Amara User Manual | 37

Tension Quick Start Guide

Bobbin adjustments are minute, like ticks of the clock.
1. Always adjust bobbin tension first. 2. Stitch to check top tension. 3. If thread looks like Diagram A
Problem: The top thread is too tight. Solution: Turn the top tension dial counter-clockwise to loosen the top tension. 4. If thread looks like Diagram B Problem: The top thread is too loose. Solution: Turn the top tension dial clockwise to tighten the top tension.
Threading the Machine
Handi Quilter recommends that you select and use only high-quality threads for your quilts.
To thread the machine
1. Place thread cone onto spool post on the thread tray, insert the thread through the thread-mast eyelet from back to front, continuing to the thread guide .
2. Continue to the three-hole thread guide . Wrap all three holes from back to front, being careful not to cross threads. This is recommended for most threads. However, some very delicate threads or metallic threads may require less tension. If you are having problems with thread breaking, try threading only one or two holes of three-hole thread guide.
3. The thread continues down to thread guide just above the top tension and then on to the top tension assembly . Â IMPORTANT: The thread must be flossed up between the two tension discs. If the thread is not firmly in place between the two tension discs, the thread will lay on top of the tension discs (no tension) and thread looping on the bottom of the quilt can occur.
38 | www.HandiQuilter.com

4. After the thread is in place, be sure that the thread catches on the take- up spring. Then guide the thread under the stirrup thread guide .
5. Bring the thread up and through the hole of the take-up lever from back to front, and then through the pigtail thread guide , and thread through the needle bar thread guide hole .
6. Make sure the thread follows the groove down the front of the needle and insert the thread through the eye of the needle from front to back . While pulling thread through the eye of the needle, be careful that the thread does not twist around the needle. ONLINE: For more information about threading the machine, watch the video Threading the Machine at: https://youtu.be/CZs4Jw6b0bU.
HQ Amara User Manual | 39

Quilting with the Amara

Preparing to Quilt
1. Make sure your machine has been cleaned, oiled, has a new needle, and that the tracks on the frame are free from threads or other debris. If the machine isn’t already plugged in, plug it in now.
2. Select your thread and wind one or more bobbins. 3. Turn on the main power switch at the back of the machine and then use the front power
button on the left side of the machine to turn the machine on or off as needed. 4. Set your bobbin tension and thread your machine. 5. After loading your quilt, use a scrap of fabric along the edge of the quilt backing and batting
to test your top tension. Make adjustments to the top tension as needed.
To load the quilt ONLINE: For more information about loading the quilt using ClearView mode of the QuiltmasterTM DuoLoad system, watch the video HQ Studio2 Frame ClearView Load at: https://youtu.be/MkmK1ruszvU. ONLINE: For more information about loading the quilt using Standard mode of the QuiltmasterTM DuoLoad system, watch the video HQ Studio2 Frame Standard Load at: https://youtu.be/dp-SotW27U4.
To bring bobbin thread to the top of the quilt ONLINE: For more information about starting and stopping quilting and programming handlebar buttons, watch the video Bringing Up the Bobbin Thread at: https://youtu.be/7v_iNc-nwxY.
1. After the machine is threaded, move the machine over the quilt to your starting location.
2. While firmly holding the tail of the needle thread, press the needle up/down button twice, causing the needle to go down through the quilt sandwich and then back to the up position.
3. Move the machine two to three inches while holding the needle thread in place. The bobbin thread will pull through to the top of the quilt.
40 | www.HandiQuilter.com

4. Grasp the bobbin thread and pull it to the desired length. Reposition the needle to the starting location. Manually tie off the threads by quilting a few very tiny stitches or use the automatic Tie-off feature by pressing the Tie-off button on the Home screen and slightly moving the machine. Press the Start/Stop button to begin quilting.
NOTE: If you have customized either the star or diamond button to do a tie- off, press that button on the handlebar instead. For more information about configuring the handlebar buttons, see To customize the handlebar buttons in the Machine Settings section of this manual.
To start or stop quilting · Start or stop the machine at any time by pressing the Start/Stop button on the handlebars.
To tie off threads when starting and ending quilting ONLINE: For more information about starting and ending quilting and programming handlebar buttons, watch the video Programming Handlebar Buttons at: https://youtu.be/4VK6R4STUuw.
· Touch the Tie-off button on the Main screen and slightly move the machine to perform an automatic tie-off. For more information about tying off your stitching, see To configure automatic tie-offs in the Toolbar Options section of this manual.
Free-Motion Quilting
ONLINE: For examples of different types of free-motion quilting, watch the video FreeMotion Quilting at: https://youtu.be/xmNSDMwaq6Q.
QUILTING TIP: When quilting, relax your hands and maintain a light touch on the handlebars. Gripping the handlebars too tightly may cause body tension resulting in poor quilting quality. The Amara, in combination with the Handi Quilter frame system, will give you a smooth even glide while quilting.
HQ Amara User Manual | 41

Micro Quilting
For more information about adjusting the front handlebars for micro quilting, see To use the handlebars for micro quilting in the Installation and Setup section of this manual.
ONLINE: For more information about micro quilting, watch the video Micro Quilting at: https://youtu.be/ZNYy84Cak-M.
Optional Computer-Guided Quilting: Pro-Stitcher®
The Pro-Stitcher® quilting system integrates Handi Quilter’s quilting machines with the best computer technology for computer-guided quilting using digital designs. The software is managed from a state-of-the-art tablet computer that is conveniently mounted on top of the machine. This rich and full-featured software is easy to learn and makes precise quilting simple and fun!
Using the Pro-Stitcher Tablet on Your Amara
When you add Pro-Stitcher to your Amara, the Pro-Stitcher tablet computer replaces the front touchscreen display. The Amara display is integrated into the Pro-Stitcher tablet computer. The Amara software works the same as it did on the 7″ display. However, when also using Pro-Stitcher, the Pro-Stitcher software sometimes overrides some of the Amara settings. For more information about how Pro-Stitcher works with the Amara, see the Pro-Stitcher user manual.
First turn on the Amara, then turn on the Pro-Stitcher tablet computer. Both the Pro-Stitcher software and the Amara application console start up.
NOTE: After the Amara application console starts, it works the same as if you were running it from the smaller touchscreen display, as described in the Using the Touchscreen Displays and Toolbar Options sections of the manual.
While the Amara and Pro-Stitcher are running, a menu appears in the upper left corner of the screen. Touch a button on this menu to switch between using Pro- Stitcher, using the Amara console, and using Pro-Stitcher Designer. You can also open the on-screen keyboard, or close the menu from view.

Close

Keyboard

Amara Pro-Stitcher Pro-Stitcher Designer

Use Pro-Stitcher to quilt, or switch to free-motion quilting by disengaging the Pro-Stitcher gears. (In Pro-Stitcher, select Pro Stitcher tab, then Gears button to disengage the gears.)

42 | www.HandiQuilter.com

Handlebar Star and Diamond Buttons with Pro-Stitcher
Four functions in Pro-Stitcher override your custom settings for the star and diamond buttons on the handlebars. When creating areas, the star button is 2-point and the diamond button is multipoint. When using Freehand Record, the star button starts and stops recording. When using Mark to create lines for quilting, the diamond button creates points on the line. See the Amara version of the Pro-Stitcher manual for more information about how the star and diamond buttons work with these functions.

Programmable button

Programmable button

Updating the Amara Software
If you are running the Amara from a Pro-Stitcher tablet computer, the Update screen has only the machine icon. You will update the Amara machine software and the rear display using the Update option on the Tools menu. However, the Amara console application software is part of the Amara version of the Pro- Stitcher software. Make sure you are using the latest version of the Pro- Stitcher software.

Machine software update icon
HQ Amara User Manual | 43

Using the Touchscreen Displays

The Amara has touchscreen displays on the front and rear handlebars. They each work the same. For example, use the displays to alternate between stitch- regulated and non-stitch-regulated operation, to control settings for how you prefer your machine to operate, and to use tools such as counting stitches on a quilt or logging how much time it took to finish your quilt.
NOTE: If you have Pro-Stitcher, you should have installed the tablet computer that came with Pro-Stitcher at the front of the machine rather than the 7-inch touchscreen. You will then use the Pro-Stitcher tablet to control the functions of the Amara.
Buttons are selected, or on, when they are green and display black text or graphics. Buttons are off when they are purple and display white or lighter gray text or graphics. When you touch a button, it will toggle on or off, open a pop-up box for you to enter information, or open a screen with more options.

Button is selected, or on.

Button is deselected, or off

If a button cannot be used, usually because another process is underway, it will be gray.

Button cannot be used at this time.

44 | www.HandiQuilter.com

Overview of the Main Screen

The Amara main screen provides quick access to all functions.
These buttons indicate whether
your machine is stitching or paused. It is currently paused because the pause
button is green, or on.

This Toolbar appears on every screen to provide quick access to often-used options. When selected, the icons will be green, not white.

Touch this icon to open the Lights screen. For more information about turning lights on and off, see Controlling the lights in the Toolbar Options section of this manual.
Touch this icon to open the Tools. For more information about the various tools, see Machine Tools in the Toolbar Options section of this manual.
Touch this icon to open the Settings. For more information about the various settings, see Machine Settings in the Toolbar Options section of this manual.
Touch this icon to see system information, as well as a machine threading guide and needle/thread guide. For more information about the system information that is available, see Information Screens in the Toolbar Options section of this manual.
HQ Amara User Manual | 45

This area of the main screen controls the stitching modes. It is currently set to
manual mode. It also shows the current
stitches per minute setting and three
stitches-per-minute presets. This area
changes according to the stitching mode
you’ve selected.

The on-screen hand wheel enables you to rotate the machine’s hand wheel from the main screen rather than reaching around the machine to do it manually.

These buttons remain the same regardless of the stitching mode you choose.
Tie-off button: Use this button to perform a tie-off at the start or finish of your stitching. Touch the button and gently move the machine to perform the micro stitches. The number below the image indicates how many micro stitches will be performed.
For more information about how to configure the number of micro stitches in a tie-off, see To configure tie-offs in the Toolbar Options section of this manual.
Needle-stop button: Touch the button to alternate between having the needle stop in the up or down position when you press the stop/start button to stop stitching. Your choice displays in green.
This button does not move the needle, but rather indicates your preference for the final needle position when quilting is stopped.
Reset-bobbin button: Press this button after a bobbin change if you are using the low-bobbin alarm. This resets the low-bobbin reading to indicate you are using a full bobbin. The number on this button shows an estimate of how much thread remains on the bobbin. This number updates as you quilt. As the number gets closer to zero, the bobbin is running out of thread. For more information about the low-bobbin settings, see To add a new bobbin configuration and record bobbin capacity in the Toolbar Options section of this manual.
 IMPORTANT: Touch this button only to reset the bobbin capacity to indicate a full bobbin. If you want to open the Low Bobbin Alarm screen, select the Machine Settings toolbar button and then select the Low Bobbin Alarm screen.

46 | www.HandiQuilter.com

To use the on-screen handwheel The on-screen hand wheel enables you to rotate the hand wheel from the Main screen rather than reaching around the machine to do it manually. Drag your finger down from the top of the on-screen hand wheel (in the direction of the arrows) to cycle the needle bar and the presser bar. NOTE: You can, if necessary, move your finger in an upward motion to turn the hand wheel in the opposite direction. You’ll typically do this only when you need to break a thread lock.
Stitching Modes
The Amara enables you to choose between two modes of stitch regulation Cruise or Precision; or to choose manual stitching. It also includes a basting mode.
Manual Stitching Mode
When using the manual stitching mode, the length of the stitch is determined by how quickly or slowly you move the machine, in combination with the number of stitches per minute (up to 2500) that you have selected. For a consistent stitch length, you will need to move the machine at a consistent speed. Experiment with different combinations of quilting speed and stitches per minute to find what optimally works for you.
HQ Amara User Manual | 47

To use manual stitching mode
ONLINE: For more information about using manual stitching mode, watch the video Micro Quilting at: https://youtu.be/ZNYy84Cak-M.
· Touch the Manual button and then specify the stitches per minute (SPM) by pressing the plus (+) or minus (­) buttons on the screen or selecting one of the stitches-per-minute presets. Pressing the plus (+) or minus (­) buttons on the screen to change the stitches per minute has the same effect as pressing the plus (+) or minus (­) buttons on the handlebars.

The Manual Mode button is selected.

Touch one of the stitches-per-minute presets to quickly change the current stitches-per-minute setting.

Shows the current stitches-per-minute setting. Press the plus (+) or minus (-) buttons to increase or decrease the setting.
To save it as a preset, touch one of the save buttons.
To configure the manual stitching mode preset speeds
The manual mode preset speeds are three different stitches-per-minute speeds, that are saved for quick access from the Main screen. After you set the speeds, you can choose one of the presets when in Manual stitching mode and it becomes the current speed. For example, perhaps you will set one preset for the speed you prefer for continuous line free motion quilting, a different speed for ruler work, and yet another speed for micro quilting.

Touch to save the current SPM setting as a preset.
1. Select Manual stitching mode by touching the Manual button. 2. Press the plus (+) button to increase or the minus (­) button to decrease the current stitches
per minute setting. 3. Touch the save button next to one of the stitches per minute presets to save the current setting
as a preset.
48 | www.HandiQuilter.com

QUILTING TIP: Set the machine at a medium speed (such as 1000) and begin moving it until you become accustomed to the resistance. By moving the machine faster, the stitches will begin to elongate. The stitch speed can either be increased or the machine can be moved slower to get the stitches at your desired length. By moving the machine slower, the stitches get shorter and can build up on top of each other, break the thread, or make it extremely difficult to unpick. The stitching speed can be decreased, while maintaining a constant motion with the machine to bring the stitches to the desired length.
Stitch Regulation Mode
There are two stitch regulation modes: Cruise and Precision. To use Cruise stitch regulation
ONLINE: For more information about using Cruise stitch regulation, watch the video Micro Quilting at: https://youtu.be/ZNYy84Cak-M.
· Touch the Regulated button and then touch the Cruise button.
After you press the Start/Stop button on the handlebars, the Start stitching indicator in the upperleft corner of the screen turns green and the needle begins moving up and down according to the cruise speed or stitches-per-minute setting. When you start moving the machine the needle will move according to the stitches-per-inch setting. Similarly, as you bring your quilting to a stop, the needle will continue moving at the cruise speed (stitches per minute) until you press the stop button on the handlebars. The minimum speed of the needle is dependent upon the stitches-perminute setting you choose. Handi Quilter recommends beginning with a setting of 200. Begin moving the machine immediately after pressing the Start/Stop button to avoid stitching in place for too long.
QUILTING TIP: The constant minimum stitching speed featured in the Cruise stitch regulation is useful when creating sharp points such as the point of a star or the bottom of a heart.
HQ Amara User Manual | 49

To use Precision stitch regulation ONLINE: For more information about using Precision stitch regulation, watch the video Micro Quilting at: https://youtu.be/ZNYy84Cak-M
· Touch the Regulated button and then press the Precision button.

The Regulated Mode button is
selected.

The Precision stitch regulation button is selected.

After you press the Start/Stop button on the handle bars, you must begin moving the machine for it to begin quilting according to the stitches-per-inch setting. The Start stitching indicator in the upper-left corner of the screen turns green but the needle doesn’t automatically begin moving up and down. When you begin moving the machine, stitching begins. When you stop moving the machine, stitching pauses until you move the machine again. To stop stitching, press the Start/ Stop button on the handlebars.
NOTE: When using Precision stitch regulation, if you stop moving the machine but do not press the Start/Stop button, after two minutes it will time out and a message box appears to let you know you will need to press the Start/Stop button to resume quilting.
U CAUTION: Always make sure the power is off when changing the needle, replacing the bobbin, or placing your hands near the needle to avoid unwanted stitching in your quilt or in your fingers.
QUILTING TIP: When to use Precision stitch regulation. Precision stitch regulation mode is useful for ruler work. Stitch along the length of the ruler for the span of your hand and stop moving the machine, but do not press the Stop button. When you stop moving the machine, the needle pauses. Move the ruler and then begin moving the machine to continue quilting. Precision stitch regulation helps you to avoid bobbles and uneven stitches. Precision is also useful for precise backtracking or over-stitching, such as backtracking over the tops of feathers.
QUILTING TIP: Getting started with stitch regulation. Set the machine to your desired stitch length. Begin moving the machine. The machine motor will slow down or speed up to maintain a consistent stitch length according to how quickly or slowly you move the machine. Moving the machine too fast or in radical or jerky movements will defeat the stitch regulator function.
QUILTING TIP: Quilting speed while in stitch-regulation mode. Quilting speed while in stitch-regulation it is unlikely that you will move the Amara across the quilt too fast. However, if you do, it will result in an over-speed condition and the machine will not maintain stitch regulation. An over-speed alarm, if turned on, will alert you that you should slow down your quilting to maintain stitch regulation.
50 | www.HandiQuilter.com

Basting Mode

The Amara includes five basting stitch options for basting a quilt. The basting stitch options are available in stitch regulation mode only.

The stitches-per-inch setting ranges between 24 stitches per inch and 5 stitches per inch. If you continue to press the minus (­) button on the screen, after 5 you will see B1/4″, B1/2″, B1″, B2″, and B4″.

B1/4″ One stitch every quarter inch of movement of the machine

B1/2″ One stitch every half inch of movement of the machine

B1″

One stitch every one inch of movement of the machine

B2″ One stitch every two inches of movement of the machine

B4″ One stitch every four inches of movement of the machine

ONLINE: For more information about basting mode, watch the video Basting a Quilt at: https://youtu.be/Zxv9VJPspDg.
To baste a quilt
1. Touch the Regulated button.
2. Press the minus (­) button next to the stitches-per-inch box on the screen until you see 5 stitches per inch. Continue touching the minus (­) button and the five basting stitch options appear. Choose the one you want to use ­ either B1/4″, B1/2″, B1″, B2″, or B4″.
3. Begin basting the quilt by pressing the Start button. As you move the machine across the quilt, it will perform a stitch (needle down and then needle up) every quarter, half, one, two, or four inches according to your choice of basting stitch length. QUILTING TIP: If you are basting the edges of the quilt to the batting and backing, choose a low number of stitches per inch, somewhere between 4 to 8 stitches per inch, rather than one of the basting-mode stitches. This will help to prevent the hopping foot from going between the batting and quilt top.

HQ Amara User Manual | 51

Toolbar Options

The toolbar is in the upper-right corner of the screen at all times.

Controls lights

Opens machine settings

Opens machine
tools

Displays machine information

Controlling the Lights

Your Amara comes equipped with three standard lighting areas: throat, needle, and bobbin.

To control the lights on the machine

· To open the Lights screen, touch the Lights icon in the Toolbar. After selecting the icon, it turns green and the Lights screen opens.

Light 1 is under the arm of the machine.

The Lights button is selected (green).

Light 2 is the light ring that illuminates the needle and
stitching area.

When lights are on, the on/off button displays in color. When off, the button is gray. Touch the on/off button to quickly turn on (or off) the light.

52 | www.HandiQuilter.com

Touch the All Lights (1,2) button to turn on (or off) all of the lights at once.

Machine Tools

Use the slider to vary the intensity of the light. Touch the black dot and drag to the right to increase the intensity or to the left to decrease the intensity. The intensity settings are saved when lights are turned off and will be the same when you turn them on again.

To open the machine tools, touch the Tools icon in the Toolbar. After selecting it, the icon turns green.

The Tools button is selected (green).

Choose from the five tools at the bottom of the screen.

Sets the quilting timer, the stitch counter and the quilting alarm

Opens the on-screen calculator

Updates the machine’s software

Zeros the EasySet Tension following disassembly

Opens the Diagnostics
screen

After you select an option, the button background turns green and the screen changes allowing you to customize that setting. The next time you touch the Tools icon, the last Tools option you used appears.

HQ Amara User Manual | 53

Quilting Timer, Alarm, and Stitch Counter
The timers screen enables you to track the amount of time you work on a quilt, to set a timer to remind you when your quilting time is up, and to track the number of stitches on a quilt.

Stitch counter tracks how many stitches you have quilted.

Quilt timer tracks how much time you spend stitching a quilt.
Sets a quilting alarm.

· Touch the Tools icon in the Toolbar. Then touch the Timers button. Press the Home button to return to the Main screen.

To track how much time you spend on a quilt

Use the quilting timer to keep track of how much time you spend stitching on a quilt. The quilting timer measures time the machine is actually quilting, not the time the machine is on but idle. It operates like a stop watch.

1. When you begin a new quilt, press Reset.

2. When you are ready to begin tracking the time spent on a quilt, press Play. Proceed with your quilting. When you are through quilting for a time, press Pause.

3. When you resume quilting, press Play again. The quilting timer will continue tracking your time and add it to the previously recorded time.

Play/Resume button: Press to begin tracking the time spent on a quilt.

Reset button: Press to clear the quilting timer, usually when you begin a new quilt.

Pause button: Press to turn off the timer until the next time you press Play/Resume.

54 | www.HandiQuilter.com

To track the number of stitches in a quilt
Use the stitch counter to count the number of stitches in a quilt. · Press the Reset button to zero-out the counter when you begin a new quilt. To see the lifetime stitch count for your machine, see the Information screen.
Reset button: Press to clear the quilting stitch counter.

To set the quilting alarm

Use the quilting alarm to set a reminder that alerts you when the time you’ve allotted for quilting is done. After you enable the alarm, the time begins to count down. Unlike the quilting timer, this alarm measures elapsed time, not machine quilting time. The example below shows only 3 minutes and 55 seconds are remaining before the alarm will sound.

00:03:55
Shows the current quilting alarm setting. Press the plus (+) or minus (-) buttons to change the alarm setting.

Touch the alarm
icon to turn on or off the quilting alarm. It appears green when enabled.

1. Specify the amount of time that will elapse before the alarm will go off. Change the alarm setting by pressing the plus (+) or minus (­) buttons which increments the setting by one minute at a time.
2. Touch the alarm icon to turn on the quilting alarm. When the time has elapsed, an alarm will sound.

HQ Amara User Manual | 55

On-screen Calculator
The Amara includes a basic on-screen calculator. It functions like all basic calculators. For example, press a number button and a function button followed by another number button. Function buttons include addition (+), subtraction (­), multiplication (x) and division (÷). After you’ve pressed the numbers and the function buttons, press the equal sign (=) for the answer.
· Touch the Tools button in the Toolbar. Then touch the Calculator button along the bottom of the screen. Press the Home button to return to the Main screen.
The Tools button is selected, or green.
Software Updates
From time to time Handi Quilter releases a software update for our machines. This update feature enables you to take advantage of the latest new capabilities added to machines. When an update is released, download the updated file(s) to a USB drive using a computer that is connected to the Internet.
· Touch the Tools button in the Toolbar on the front display. Then touch the Update button along the bottom of the screen.
56 | www.HandiQuilter.com

To update the machine’s software · After downloading the updated software to a USB drive, insert the drive in the designated USB port on the bottom of the front display. Look for the message in the bottom bar that confirms a USB drive has been inserted. If it doesn’t appear, reinsert the USB drive. Then touch the Update button. Press the Home button to return to the Main screen. ONLINE: For more information about updating the machine’s software, watch the video Updating the Software on the Amara at: https://youtu.be/KfgOJIqqhyg. Â IMPORTANT: If you are running the Amara from a Pro-Stitcher tablet computer, the Update screen has only the machine icon because you update the machine software only. The Amara display software is part of the Pro-Stitcher software. Make sure you are also using the latest version of Pro-Stitcher.
1. Insert the USB drive into the USB port on the bottomside of the front display. Then touch the machine icon to update the machine’s software.
2. You will be prompted to choose the file you want to use to update the machine software. Touch the Select Version box and then select the filename of the update file you downloaded.
3. Be patient as this will take a few minutes.
4. When complete, the machine will beep. Remove the USB drive and restart the machine.
HQ Amara User Manual | 57

To update the display software You will need to update the display on both the front and rear. 1. After inserting the USB drive into the USB port on the
bottom-side of the display, touch the display icon to update the display’s software. NOTE: To update the rear display, insert the USB
drive with the update into the bottom of the rear display. After updating, remove the USB drive from the display. 2. You will be prompted to choose the file you want to use to update the display software. Touch the Select Version box and then select the filename of the update file you downloaded.
3. When the message box appears, select New and Install.
4. Be patient as this will take a few minutes.
5. Confirm that you want to overwrite the current software with the new software by choosing Install. If you decide to not update the software, choose Cancel.
58 | www.HandiQuilter.com

Easy-Set Tension Reset
1. Begin by loosening your tension discs by turning the Easy-Set Tension knob counter clockwise until the two tension discs move freely. This may take a few complete turns.
2. Then turn the Easy-Set Tension knob clockwise until the tension discs come together enough to have a bit of resistance.
3. Touch the Easy-Set Tension button in the Toolbar. The Easy-Set Tension Display will now read as 0.
0
4. Turn the Easy-Set Tension knob three full clockwise turns to return the tension close to factory setting.
Diagnostics
There are several diagnostics tests that you may be asked to perform by Handi Quilter’s technical solutions team or an authorized Handi Quilter retailer. They will give you a code to enter into the Diagnostics screen to be able to perform the tests.
· Touch the Tools button in the Toolbar. Then touch the Diagnostics button along the bottom of the screen. Enter the code you received and follow the instructions for the different diagnostics tests.
Contact your local retailer or Handi Quilter technical solutions at +1 801-292-7988 or 1-877-MY-QUILT (697-8458).
HQ Amara User Manual | 59

Machine Settings
To open the machine settings, touch the Settings icon in the Toolbar. After selecting it, the icon turns green.
Then choose one of the six options that appear along the bottom of the screen. After you select an option, the button background turns green and the screen changes, allowing you to customize that setting. The next time you touch the Settings icon, the last Settings option you used appears

Configure low- Customize Turn on or off Configure

bobbin alarms handlebars laser lights

alarms

Configure tie-offs

Set Language

· Press the Home icon in the upper left corner of the screen to close Settings and return to the Main screen.
Low-Bobbin Alarm
The amount of thread that fits on a bobbin varies according to the type and weight of thread you use. You can create a low-bobbin capacity for up to twenty types of thread that you use in your bobbin. You’ll then use this capacity for setting a low-bobbin alarm to alert you to when the bobbin thread is running out.

60 | www.HandiQuilter.com

· Touch the Settings icon in the Toolbar. Then touch the Low-bobbin Alarm button.

Add a new Delete a

bobbin

bobbin

Name that describes the thread in the
bobbin.
Configure lowbobbin settings.
Record button Bobbin capacity estimates bobbin capacity
To add new bobbin configuration and record bobbin capacity

Edit bobbin description button.
Press to toggle on and off the low-bobbin alarm.

1. When you are ready to define a new bobbin capacity for a particular type of thread, completely fill a bobbin with that thread and insert it into the machine.

2. Touch the icon to add a new bobbin. Use the pop-up keyboard to enter a descriptive name, so you will know which type of thread this configuration applies to. Close the pop-up keyboard by touching the arrow in the lower-left corner of the screen.

3. Touch the Record button. The bobbin capacity value will reset to zero. Quilt until the bobbin runs out.
NOTE: The Reset Bobbin button on the Main Screen shows the bobbin level as you quilt. When you touch the Reset Bobbin button, it shows the estimated capacity of the full bobbin. As you quilt, this number counts down. While you are recording the bobbin capacity of a bobbin, the number increases as you quilt until it runs out of thread.
4. Return to the low-bobbin alarm screen and press the Record button again to stop recording. The number that appears in the Bobbin Capacity box is an estimate how much thread is on the bobbin.

HQ Amara User Manual | 61

5. Estimate how much bobbin thread you think you’ll use for tie-offs and decrease the bobbin capacity by that much. Press the Minus (­) button to decrease the capacity. Or, touch the Bobbin Capacity box to pop up an on- screen number pad and enter the number directly.
6. When you are ready to use a full bobbin with that type of thread, insert the full bobbin and press the Reset Bobbin button on the Main screen.
7. Make sure the alarm icon is enabled (green). If not, touch the Alarm icon to toggle it on. When the bobbin level reaches zero, the low-bobbin alarm will sound.
NOTE: If you turn on or off the low-bobbin alarm on this screen, it is also turned on or off on the Alarms screen.
The next time you use one of the threads for which you’ve set up a low-bobbin threshold, touch the bobbin name box and choose the specified thread name by touching it. Insert a full bobbin with that thread into the machine and press the Reset Bobbin button on the Main screen.
To delete a low-bobbin configuration · Touch the bobbin name box and choose the specified thread name by touching it. Then touch the Delete Bobbin button.
To edit a low-bobbin configuration · Touch the bobbin name box and choose the specified thread name by touching it. Then touch the Edit Bobbin button. Make any changes using the pop-up keyboard.
Handlebar Button Customization
Use the handlebar customization settings to confirm your handlebar button choices and to customize the functions of the star and diamond buttons on the handlebars.
 IMPORTANT: However you configure the front handlebars, the rear handlebars are automatically configured the same way.
62 | www.HandiQuilter.com

To configure the star and diamond buttons on the handlebars
Touch the star or diamond to select the function from the drop-down menu.

1. Select the down arrow next to the star or diamond to display a drop-down box with the options for the star and diamond buttons.

2. Touch your selection for the button.

The options for customizing the star and diamond buttons are below:

Option

Action Performed

None

The button will not perform a function.

Start/Stop

Starts or stops stitching

Needle Up/Down

Performs a half stitch by cycling the needle up or down

Increase

Increases stitching speed in manual or SPI in regulated

Decrease

Decreases stitching speed in manual or SPI in regulated

Tie-Off

Performs a tie-off stitch

 IMPORTANT: If you use Pro-Stitcher, it will override your settings for the star and diamond handlebar buttons for selected Pro-Stitcher functions. For more information about using Pro-Stitcher with the Amara, refer to the Pro- Stitcher user manual.

HQ Amara User Manual | 63

Pinpoint Needle Laser
The Amara comes equipped with a needle laser. It precisely shows where the needle will enter the quilt. Turn the laser on or off with the Laser settings.
To turn the laser on or off
Touch the toggle button to turn the
laser on or off.
Control the needle laser. Light is currently on.
· Touch the Settings icon in the Toolbar. Then touch the Laser button. Touch the toggle button to turn the laser on or off.
Alarms
The alarm settings enable you to quickly turn on or off the alarms for the low bobbin, thread breaks, and over-speed. Low-bobbin alarm: Alerts you when the low-bobbin threshold has been reached, indicating you will soon run out of bobbin thread. For more information about the low-bobbin alarm, see LowBobbin Alarm above. Thread-break alarm: Alerts you if the top thread breaks while quilting. 64 | www.HandiQuilter.com

Over-speed alarm: Alerts you if you are moving the machine faster than 100% of motor capacity and therefore are quilting too fast for stitch regulation to work properly. Because of the high speeds that the Amara can handle, you will most likely never encounter this alarm.
Thread-break alarm

Low-bobbin alarm

Over-speed alarm

Purple indicates the
alarm is off, green alarm is on. Touch to
toggle between on
and off

Configure alarms

To turn on or off alarms
· Touch the bell button below the alarm to turn it on or off. It is on when it appears green with the sound-wave symbols. It is off when it appears purple.

Tie-offs
Use tie-offs to begin and end your quilting to ensure the stitching doesn’t come out. You can manually do the tie-offs by simply stitching a few very tiny stitches, or let the Amara perform a predefined number of quick, micro stitches for you. You can set the number of micro stitches from 2 to 10.
To configure tie-offs ONLINE:To see how to tie off the thread, watch the video Bringing up the Bobbin Thread at: https://youtu.be/7v_iNc-nwxY
· Touch the Settings icon in the Toolbar. Then touch the Configure Tie-offs button. Press the plus (+) or minus (­) buttons to increase or decrease the number of micro stitches in a tie-off.

Green stitches show how many micro
stitches are part of a
tie-off

Press the plus (+) or minus (-) buttons to increase or decrease the number of micro stitches in a tie-off
Configure tie-offs
HQ Amara User Manual | 65

After you indicate how many stitches are in an automatic tie-off, use the Tie- off button on the Main screen to perform the tie-off. Touch the button and gently move the machine to perform the micro stitches.
Set Language
The language setting determines the language used on the Amara information screens. The choices are English, French, German, and Spanish. To select a language
· Touch the Settings icon in the Toolbar. Then touch the button to set the language. Press the down arrow to display the list of available languages. Touch your preferred language to select it.
Select language Set language
66 | www.HandiQuilter.com

Information Screens
The Information option provides system information and quick reference guides about your Amara.
To see the needle and thread chart
For quick reference, the Amara has an on-screen guide for which size needle is appropriate for different weights of thread.
· Touch the Information icon in the Toolbar. Then touch the Needle button.
Opens needle and thread guide

To see the machine threading diagram
For quick reference, the Amara has an on-screen guide that shows how to thread the machine. For more information about threading the Amara, see Threading the Machine in the Using Your Machine section of this manual.
· Touch the Information icon in the Toolbar. Then touch the Machine Threading button.

Shows closeup diagrams of
threading the machine.

Opens machine threading diagrams.

Select one of the buttons along the left to see close-up diagrams of steps 1 through 3, 4 through 9, and 10 through 12.

HQ Amara User Manual | 67

1­3 4­9 10­12
68 | www.HandiQuilter.com

To monitor system information about your machine
You may need to provide system information to Handi Quilter or an authorized Handi Quilter Retailer when purchasing machine accessories or receiving technical assistance.
· Touch the Information icon in the Toolbar. Then touch the Information button.

Opens system information about the machine.

Lifetime Stitch Count

Shows the lifetime stitch count for your machine

Lifetime Machine Time

Shows the cumulative time your machine has quilted

Machine Hardware Version Shows the electronics board version number

Machine Software Version Shows the machine’s software version number

Screen Hardware Version Shows the screen’s version number

Screen Software Version Shows the screen’s software version number

HQ Amara User Manual | 69

Machine Maintenance
Clean and Oil Your Amara
The only place where you need to regularly oil your machine is the bobbin hook assembly. Failure to keep the hook assembly lubricated can cause severe damage to the machine. We recommend that you oil the hook assembly with each bobbin change and before use if you haven’t used the machine for a few days.
A change in the sound of the machine while quilting also indicates that it may need to be oiled. NOTE: Internal oiling needs to be done when the machine is taken to a service technician for routine maintenance and cleaning, every 24 months or 10 million stitches (whichever comes first). Â IMPORTANT: Only use light sewing machine oil on the hook when oiling your machine.
To clean the bobbin area and oil the bobbin hook ONLINE: To see how to clean and oil the bobbin area, watch the video Bobbin Tension and Maintenance at: https://youtu.be/3j25v5P7a5U.
1. Turn off the machine by powering off the front switch. Then remove the bobbin and bobbin case.
2. Clean the bobbin basket area using a lint brush.
3. Put a small drop of oil on the hook in the region where the bobbin basket assembly and the rotating hook meet. The oil will work its way back into the interlocking area of the hook and bobbin basket.
4. Replace the bobbin and bobbin case and turn on the machine.
QUILTING TIP: After oiling, always sew on a scrap piece of fabric off to the side of the quilt as oil may cling to thread. Over-oiling can cause excess dripping from the bobbin assembly.
70 | www.HandiQuilter.com

To clean the touchscreen display · Use a soft rag or microfiber cloth dampened with isopropyl alcohol and then gently wipe the display to remove any dust or finger marks. U CAUTION: Never use any chemicals to clean your display as this may negatively affect the display’s touchscreen response.
Maintenance Schedule
In addition to the ongoing cleaning and oiling maintenance, you should have your machine serviced by an authorized Handi Quilter retailer every 24 months or 10 million stitches, whichever occurs first. They will take care of oiling and greasing internal parts and ensure the machine is in proper working order. When your machine reaches 10 million stitches, a pop-up message appears to remind you to have your Amara serviced.
HQ Amara User Manual | 71

Troubleshooting

You can correct many problems on your own. If you need additional help, contact your local, authorized Handi Quilter retailer.

You can also contact Handi Quilter technical solutions at 1-801-292-7988, 1-877-MY-QUILT (697-8458), or TechCares@HandiQuilter.com.

First check the following: 1. The AC power cord is properly connected and both power switches are turned on. 2. Confirm that all cables are properly seated into their connections. 3. Turn off the machine completely. Wait for at least ten seconds and then turn it back on.

If the above checks did not solve the problem, refer to the information below.

Skipped Stitches
The needle is damaged, dull, bent, or installed improperly

Corrective Measure(s)
· Replace the needle often, normally once or twice per day for continuous quilting or at least once per quilt. Use only the recommended needle system.
· Always change the needle if the needle has struck any hard object such as a pin, etc. The tip of the needle can become damaged or burred, resulting in fabric damage as well as skipped stitches, thread breakage, or shredding.
· Always change the needle if it has been hit, bumped or pulled off center while maneuvering the machine over the quilt. A slightly bent needle can be a major cause of skipped stitches.

Incorrect needle size

· Use the proper size needle for the work and thread being used. Some battings and fabrics used in quilting may constrict or impede the thread passing through the front groove of the needle. This diminishes the loop required for stitch formation. Typically, a larger needle will solve the problem. However, using certain smaller sizes of needles and ball pointed needles solve some specific problems. You will need to experiment to determine which works best with your combination of fabric, thread, and batting.

Fabric is too tight on the frame

· Loosen the pole tension on the frame. Fabric that is tensioned too tightly causes the fibers to separate and the fabric to bounce while quilting. This reduces the needle friction on the thread, resulting in a smaller thread loop.

72 | www.HandiQuilter.com

Thread tension too tight
Improper threading The needle is not positioned properly

· Check bobbin case tension and then check top thread tension. (For more information about adjusting tension, see Bobbin and Bobbin Tension and Easy- Touch TensionTM in the Using Your Machine section of this manual.)
· Ensure that the machine is threaded correctly. Refer to the on-screen threading guide if needed.
· Position the needle properly to the needle bar. Inspect the position of the needle to make sure the needle is at the 6 o’clock position. When you stand directly in front of the needle (facing the bobbin case side of the machine), you will see the entire needle eye directly facing you. This is 6 o’clock position.
· Make sure (a) the needle is installed all the way into the needle bar to the needle-stop hole, (b) the long groove in the needle is toward the front (bobbin case side), and (c) the scarf (scooped out part of the back of the needle) is toward the back of the machine.
· The needle can sometimes be rotated to 5 o’clock (slightly right) or 7 o’clock (slightly left) to adjust for a more positive thread loop pickup by the hook point.

The Needle Breaks
The needle is bent or not installed properly

Corrective Measure(s)
· Replace the needle. Make sure that the needle is pushed into the needle bar clamp until it can go no further. Visually check that it is up to the top of the sight hole above the needle bar clamp screw. If the needle isn’t installed properly, it can cause damage in the bobbin area and throat plate.

The needle hits the throat plate

· Correctly position the needle, throat plate, or hopping foot. Replace with a new needle.

Stitches are Puckered The tension is not balanced
Needle too large for quilting fabric

Corrective Measure(s)
· Balance the tension of the needle thread after ensuring the bobbin tension is adjusted correctly. (For more information about adjusting tension, see Bobbin and Bobbin Tension and Easy-Touch TensionTM in the Using Your Machine section of this manual.)
· Replace the needle with a size better suited for the fabric.

HQ Amara User Manual | 73

Poor Stitch Quality The tension is not balanced
Bobbin case is damaged, corroded, dirty, etc.

Corrective Measure(s)
· Balance the tension of the needle thread after ensuring the bobbin tension is adjusted correctly. (For more information about adjusting tension, see Bobbin and Bobbin Tension and Easy-Touch TensionTM in the Using Your Machine section of this manual.)
· Since thread slides over the surface of the bobbin case at a high speed, make sure the case is free of any lint or foreign matter that could impede thread passage through the machine.

Moving the machine too fast for needle speed selected (Manual mode)

· Synchronize machine movement and needle speed to get your desired stitch length. Elongated stitches are an indication of moving the machine too fast for the current speed.

Tension is Poor

Corrective Measure(s)

Lint caught under the tension spring in the bobbin

· If using short staple threads, inexpensive, or industrial threads, or coated threads, lint and other material will build up under the tension spring and begin to lift the spring, reducing the spring’s ability to compress against the thread. Insert a pin or the corner of a business card under the spring and clear out the lint. The bobbin tension will return fairly close to its preset tension. Test the tension before quilting.

Hand Wheel Won’t Rotate Corrective Measure(s)

Thread is entangled and caught in the hook

· There may be a thread lock. With the machine on, use the on-screen hand wheel to break the thread lock. Quickly move your finger down and up several times. If this doesn’t solve the problem, turn the machine off and use the hand wheel at the back of the machine to resolve the thread lock.

There is a thread lock.

· Carefully rock or turn the hand wheel in direction of motion and then the other direction until the thread lock breaks free. Once the hand wheel can be turned freely, remove the thread from the hook and basket. Now reoil the hook and make sure the hand wheel turns freely without the hook hitting the needle. It is possible for a thread lock to cause a timing problem.

74 | www.HandiQuilter.com

Thread Nests Under Quilt Not enough tension on top thread
Improper threading

Corrective Measure(s)
· Check that the machine is threaded correctly. Make certain that the thread is flossed snugly in place between the two tension discs. If the machine is threaded correctly, tighten top tension by rotating the tension knob clockwise. (For more information about adjusting tension, see Bobbin and Bobbin Tension and Easy-Touch TensionTM in the Using Your Machine section of this manual.)
· Refer to threading diagram and threading instructions.

Thread Backlash

Corrective Measure(s)

Bobbin thread tangles within the bobbin case, tangles and winds onto the hook spindle, or occasionally forms loops on the bottom of the quilt

· Make sure the bobbin is in the bobbin case correctly and the thread is coming out from under the tension spring. The bobbin should rotate clockwise when the thread is pulled.

Hard to Guide Machine

Corrective Measure(s)

Carriage wheels not centered on track
Thread caught in wheels

· Center the carriage wheels on top of the continuous track. Check that the machine carriage has not jumped the track.
· Remove all thread or debris in wheels. Check that the tracks are free of lint and threads.

Motor Fails to Run

Corrective Measure(s)

On/Off switch turned off

· Make sure that both power switches are turned on. First turn on the rear power switch (to the 1 position); then turn on the power button on the front- left side of the machine.

Machine not receiving power

· Check that the power connector is securely plugged into the back of the machine and the three-prong end is plugged into the power source.

HQ Amara User Manual | 75

Uneven Quilt Design

Corrective Measure(s)

Take-up rollers may be bowed or bent

· Make certain the fabric is not rolled too tight, causing the poles to bow. Check that poles are inserted completely together with the push pins engaged so bowing won’t occur.

Leaders are stretched or worn

· If fabric is beginning to stretch or fray, contact Handi Quilter to purchase replacement leaders.

Thread Breaks

Corrective Measure(s)

Thread is poor quality or may have severe twisting or thread rot

· Look for severe twisting of threads when approximately 12 to 15 inches has been pulled off, with the ends pinched together. Cotton threads are particularly susceptible to dry rot or wet rot which makes thread brittle. Do not use poor quality thread, or thread that is rotted or brittle.

Top and bobbin tensions not balanced

· Balance the tension of the needle thread after ensuring the bobbin tension is adjusted correctly. (For more information about adjusting tension, see Bobbin and Bobbin Tension and Easy-Touch TensionTM in the Using Your Machine section of this manual.)

The machine head has been threaded incorrectly or thread spools are not positioned correctly

· Check that the machine is threaded correctly.
· Inspect for accidental double wrapping of thread on thread guides.
· Inspect the thread mast, making sure the eyelets of the mast are directly over the spools.
· Inspect the vertical positioning of the thread cones. Tipped cones can dramatically affect thread tension and can cause breakage.

Debris in tension discs Bobbin rotation is not smooth
Needle is burred, bent or dull, or installed incorrectly

· Inspect for particles and remove any fuzz or debris.
· Change the bobbin. The slightest hesitation of the bobbin rotation can be the cause of dramatic tension change and thread breakage.
· Change the needle at least once per quilt. Make sure the needle is installed to the top of the stop hole in the needle bar.

76 | www.HandiQuilter.com

Needle not suitable for thread Hesitating too long at one point in quilting motif
Improper needle/hook relationship Damage or burr at needle hole of throat plate or other thread handling part
Wrong type of needle
Other possible problems

· Replace the needle to one better suited for the thread. Use the proper size needle. Refer to on-screen chart.
· Move more quickly so stitches don’t overlap or build up. When starting the machine, begin moving immediately. Sewing in one place too long will cause the thread to break.
· Machine timing needs to be checked. Consult an authorized Handi Quilter technician.
· If thread is shredding at the throat plate, check for burrs or jagged edges. Gently rub with emery cloth to remove the sharp edge. Consult a repair technician to polish any hardto-reach or delicate areas, or if the burr is inside the throat.
· Use only the needles recommended by Handi Quilter (134, sizes 12 through 21).
· Needle too close to hook, causing friction and possible collision of hook point and needle (causing broken thread).
· Needle plate damage
· Hook damage
· Broken needles or damaged needle bar clamp

Nothing visible on the display Corrective Measure(s)

Display cables unplugged

· Locate the black cables that plug into the touchscreen display and connect to the side of the machine. Make sure both ends are plugged in securely.

HQ Amara User Manual | 77

Thread Break Sensor Thread Break Alarm sounds

Corrective Measure(s)
· Thread has broken and alarm is functioning as expected; rethread the machine.

Thread Break Alarm sounds but the threads are not broken

· Rethread the machine.

Thread Break Alarm sounds but the machine is threaded correctly

· If the tensions are not tight enough to make the take-up spring pass by the Thread Break Sensor, then the alarm will sound. Increase the tensions until the take-up spring passes by the sensor. The sensor is located above and to the front of the top tension assembly.

NOTE: If the troubleshooting tips do not eliminate the problem, please consult an authorized HQ retailer.

78 | www.HandiQuilter.com

Appendix

Federal Communications Commissions (FCC) Declaration of Conformity (For USA Only)
Responsible Party: Handi Quilter, Inc. 501 North 400 West North Salt Lake, UT 84054
declares that the product
Product Name: HQ AmaraTM
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer or local sales distributor could void the user’s authority to operate the equipment.
Canadian Department of Communications Compliance Statement (For Canada Only)
This digital apparatus does not exceed the Class B limits for radio noise emission from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Department of Communications.
Radio Interference (Other than USA and Canada)
This machine complies with EN55022 (CISPR Publication 22) /Class B and AUS/NZ 55022/Class B.
HQ Amara User Manual | 79

501 North 400 West North Salt Lake, UT 84054 801-292-7988 · 877-697-8458 Email: sales@handiquilter.com
www.HandiQuilter.com
Warranty issues should, whenever possible, first be submitted to the Authorized Retailer who completed your service and training. These Retailers have been selected for their dedication to customer satisfaction and have been trained in technical service. They also may provide follow-up advice, training, service, accessories, and other services.
HQ Authorized Retailers may offer their own warranties in addition to those offered by the manufacturer, but do not obligate the manufacturer.
HQ Quilting Machine Limited Warranty
Handi Quilter, Inc. (hereinafter HQ) offers a limited warranty on the HQ Quilting Machine (hereinafter “Machine”) to be free of defects in workmanship and materials under normal use upon the terms and conditions hereinafter set forth:
(a) 90 day Limited Warranty: During the first 90 days from date of purchase, HQ will repair any manufacturing defect without charge for parts or labor. All subsequent warranties include parts costs only.
(b) 5-year Mechanical Warranty: For any mechanical failure within this period. Manufacturer will provide free replacement parts, customer pays for labor and shipping.
(c) 5-year Electronic/Electrical Warranty: The electric/electronic components are warranted to be free from manufacturing defects for five years from the date of purchase. If any defect is reported within this period, manufacturer will provide free replacement parts, customer pays for labor and shipping.
(d) 10-year Limited Manufacturer’s Warranty: HQ warrants the sewing head is free of casting or machining imperfections causing product failure. This warranty does not extend to mechanical or electronic/electrical parts, which are covered under a separate warranty, or consequential damage to the head caused by mechanical or electronic/electrical part failures beyond their warranty period.
The limited warranty stated in sections (b), (c) and (d) above shall be limited solely to the replacement of parts which, in the opinion of HQ, are defective in workmanship or material and are returned to HQ, or an authorized repair facility, or such other point or place that may be designated by HQ. All other costs, including cost of freight and shipment for repair under this warranty, shall be the customer’s costs.
The machine registration card must be completed and received by HQ before warranty is valid.
Warranty Exclusions: HQ shall have no obligation for any claim under this warranty if the machine has been misused, abused, neglected, damaged in transit or has been altered from the standard specifications 80 | www.HandiQuilter.com

established by HQ, or if proper maintenance and lubrication have not been timely performed.
No warranties extend beyond the express warranty offered. HQ disclaims all other warranties, express or implied, regarding the Products, including any implied warranties of merchantability or fitness for a particular purpose. In the United States, some laws do not allow the exclusion of the implied warranties.
Specific exclusions of warranty limitations include, but are not limited to, the following:
· General, consequential, incidental or special damages including damage to fabric or material, the cost of rework or lost profits, the cost of installation or removal of any Products, and any inspection, testing, or redesign caused by any defect or by the repair or replacement of Products arising from a defect in any Product.
· Products which are received by HQ improperly packaged, altered, or physically damaged.
· Counterfeit or altered label(s) or stickers.
· Broken pins on connectors.
· Stripped screws or nuts.
· Connector(s) damaged, cracked, missing or broken.
· Missing, torn or punctured seal(s).
· Any use besides machine quilting applications using customary fabrics, threads and accessories.
· Operator error in the customary use of the Product.
· Internal adjustments, tampering or parts replacement done by anyone except authorized Retailers or customers specifically authorized by Handi Quilter Customer Support or warranty repair personnel on a case by case basis.
The warranty does not cover and the user assumes the risk of and there is hereby excluded any liability to HQ for failure, defects, loss, deterioration, personal injury or damage which are due to: (1) ordinary wear and tear or exposure, (2) abuse, misuse, negligence, or (3) use of parts not authorized by HQ.
In no event shall HQ be liable to the purchaser of the Machine or to third parties for special or consequential damages, including, but not limited to, death or personal injuries.
HQ does not assume, or authorize any person to assume on its behalf, any other obligation of liability other than that set forth herein.
Some states do not allow exclusion of limitation of incidental or consequential damages, so above limitation or exclusion may not apply. This warranty gives the purchaser specific legal rights and the purchaser may
HQ Amara User Manual | 81

also have other rights, which may vary for State to State.
Exclusive Remedy: Remedy is limited to the repair or replacement of the defective Product. HQ may elect which remedy or combination of remedies to provide at its sole discretion and shall have a reasonable time, after determining that a defective Product exists, to repair or replace the defective product. Replacement Product may be from new or serviceable used parts. HQ’s warranty applies to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety days from the date of shipment of a repaired or replaced Product, whichever is longer.
HQ’s entire liability for any defective Product shall in no event exceed the purchase price for the defective Product. This limitation applies even if Handi Quilter cannot or does not repair or replace any defective Product.
Service under the above warranties may be obtained by returning the quilting machine, with proof of purchase, to the authorized Retailer from whom the machine was purchased, a local Retailer, or to Handi Quilter Customer Support.
Any product to be returned to the factory, either by customers or Retailers, must be accompanied by a Return Material Authorization Number (RMA).
RMAs may be obtained by email (sales@handiquilter.com) or by calling customer support toll free at 1-877-697-8458. If it is determined that the Product may be defective, an RMA number will be issued with instructions for Product return. An unauthorized return (a return without an RMA number) will be shipped back to customer at customer’s expense. Authorized returns are to be shipped prepaid and insured in an approved shipping container. The original box and packaging materials should be kept for storing or shipping.
Shipping Costs: Shipping is the responsibility of the customer.
Product Service and Maintenance: Replace needles every 2 to 4 hours (1 to 2 per large quilt) and lubricate bobbin hook every 3 to 4 hours of use. Periodically check the thread tensioner. Use a small brush to clean out all lint, loose thread or obstructions from the bobbin hook.
Servicing is recommended annually from a qualified Retailer. Servicing will cover belt tensioning, encoder positioning, bearing retainers, hook axial play and timing, presser and needle-bar adjustment and internal lubrication to take-up lever, hopping foot levers, bushings/bearings
Handi Quilter, Inc. Customer Relations 501 North 400 West North Salt Lake, Utah 84054
82 | www.HandiQuilter.com

Cut along dotted line and mail or fax this registration information within 30 days of purchase.

Handi Quilter Warranty Registration
Mail or Fax completed Warranty Registration Card within 30 days of purchase. If you have questions, email HQCares@HandiQuilter.com or call Customer Relations at 1-877-697-8458. Online warranty registration is also available at HandiQuilter.com.

MAIL TO: FAX TO:

Handi Quilter, Inc. Warranty Registration Dept. 501 N 400 W North Salt Lake, Utah 84054
801-294-3011

The HQ Quilting Machine warranty is 10 years manufacturer’s warranty on casting and machining of the case, 5 years electronic/electrical, and 5 years mechanical. Check with your local HQ Retailer for details on service or making warranty claims.

HQ Quilting Machine Model (check one): HQ Sweet Sixteen® HQ Simply Sixteen® HQ AmaraTM 20 HQ AmaraTM 24 HQ MoxieTM HQ CapriTM HQ Infinity®

Customer Name:____ Company/Business Name (if applicable):

Address:_____ City, State, Zip:__ Daytime Phone:____ Evening Phone:____ Fax:_ Email:___ HQ Serial Number:_ Order Number (5 digits):__ Purchase Date:___ Date Machine Received: _ Location of Purchase (Shop or Show name, City & State):____

Intended Use: Home/Personal Some commercial Share w/Friends Mostly commercial Other ___

Type of machine-quilting skills: Novice Intermediate Experienced Skill adjusting sewing machines: Novice Intermediate Experienced

October 2022

Signature:____ Date:
HQ Amara User Manual | 83

This page was intentionally left blank.
84 | www.HandiQuilter.com

Amara New Owner and Training Checklist and Certificate
You are entitled to a one-time free introductory training class on the use of your HQ quilting machine as well as free adjustments for 60 days and any repairs covered by the warranty. Present this checklist to your authorized HQ quilting machine Retailer to receive these free services.
Retain a copy for your records.

Table How to adjust length How to adjust height How to change from Standard load to
Clearview load

Machine Maintenance How to oil the bobbin hook: where, how, and when
How to clean the bobbin hook area
How to clean wheels and tracks

Cut along dotted line and mail or fax this registration information within 30 days of purchase.

Machine Setup Identify the main parts of the machine

IMPORTANT: Read before signing

Ensure machine is properly placed on the carriage By signing this training checklist you are acknowledg-

Check all cable connections

ing you have been personally instructed in the

Ensure power outlet is available and does not cause operation of the Amara machine you purchased.

a trip hazard

Additional training by this HQ Retailer or any other

Recommend and explain the importance of a power HQ Retailer may result in being charged for additional

strip with surge protection

instruction.

Ensure the frame is level

How to wind a bobbin (including how to adjust the Customer Name __ tension and the capacity)

How to load a quilt in both Standard and Clearview modes

Customer Signature ___

How to adjust the handlebars

Machine Operation How to turn the machine on and off (both switches) How to change the needle How to change the Handi Feet How to properly thread the machine How to set the bobbin tension; teach the drop test How to set the upper tension with Easy-Touch
Tension How to bring up the bobbin thread How to tie off (manually and with auto Tie-off) How to use the menus: explain each menu How to adjust lighting How to use the on-screen handwheel How to set and use the low bobbin estimator Explain timers and stitch counters How to switch between stitch regulation
and manual mode How to set the speed in manual mode; how to set
the presets How to set the stitches-per-inch in stitch regulation How to use Cruise stitch regulation How to use Precision stitch regulation How to use the handlebars (including setting
options for programmable buttons) Explain the alarms

Training Date ____
Trainer Name ____
Retailer Signature ____
HQ Retailer Business Name ____
Business City and State/Province __

Machine Serial Number ___ HQ Retailer: To register training services provided, return completed and signed certificate by FAX (1-801-294-3011) or MAIL:
Handi Quilter 501 North 400 West North Salt Lake, UT 84054 OR email to your customer relations coordinator.
HQ Amara User Manual | 85

This page was intentionally left blank.
86 | www.HandiQuilter.com

References

• HandiQuilter.com
• HandiQuilter.com
• Handi Quilter Live - Hands-on Training from Handi Quilter Educators
• HandiQuilter.me
• P65Warnings.ca.gov
• HandiQuilter.com/blog/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>