V-TAC VT-6076 LED Waterproof Lamp Instruction Manual

July 16, 2024
V TAC

V-TAC-logo

V-TAC VT-6076 LED Waterproof Lamp

Specifications :

  • Model: VT-6076, VT-1249, VT-1574
  • SKU: 216282-216287
  • Beam Angle: 0.7 (18W), 0.9 (36W, 48W)
  • Watts: 18W, 36W, 48W
  • Lumens: 2160LM, 4320LM, 5760LM
  • CRI: 80
  • Input Power: AC 220-240V 50/60Hz
  • Life Span: >15000 hours
  • Connectable Units: 16 (VT-6076), 8 (VT-1249), 6 (VT-1574)
  • Dimension: 600x66x58mm (VT-6076), 1200x66x58mm (VT-1249), 1500x66x58mm (VT-1574)
  • Material: PC

Product Usage Instructions

Introduction & Warranty:
WARNING!

  1. Please make sure to turn off the power before starting the installation.
  2. Installation must be performed by a qualified electrician.
  3. The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
  4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  5. Terminal block not included. To be connected with Waterproof Cable Hose.

Installation Instructions :

  1. Switch OFF the power before starting the installation.
  2. Fasten the two mounting clips to the installation surface.
  3. Open end cap and take out the connector.
  4. Link to power source.
  5. Cover back end cap.
  6. Install the lamp to the mounting clips.
  7. Hanging installation type reference.
  8. Switch ON the power to test the light.

Installation Diagram :

Wiring Diagram:

FAQ

  • Q: What should I do if the external cable is damaged?
    A: If the external flexible cable or cord of the luminaire is damaged, it should be exclusively replaced by the manufacturer or a qualified person to avoid hazards.

  • Q: How many units can be connected in series?
    A: The connectable units are limited to 16 for VT-6076, 8 for VT-1249, and 6 for VT-1574.

  • Q: What is the lifespan of the product?
    A: The lifespan of the product is greater than 15,000 hours. In case of any query or issue with the product, please reach out to us at: support@v-tac.eu. For more products range or inquiries, please contact our distributor or nearest dealers.
    V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

INSTRUCTION MANUAL
LED WATERPROOF LAMP

DIMENSION

TECHNICAL DATA

MODEL| SKU| WATTS| LUMENS| BEAM ANGLE| DF| CRI| INPUT POWER| LIFE SPAN [Hours]| ON/OFF CYCLE| MAX CONNECTABLE UNITS| DIMENSION| MATERIAL
---|---|---|---|---|---|---|---|---|---|---|---|---
VT-6076| 216282 216283| 18W| 2160M| 120°| ≥0.7| ≥80| AC: 220-240 50/60Hz| 25,000| >15000| 16| 600x66x58mm| PC
VT-1249| 216284 216285| 36W| 4320LM| 120°| ≥0.9| ≥80| AC: 220-240 50/60Hz| 25,000| >15000| 8| 1200x66x58mm| PC
VT-1574| 216286 216287| 48W| 5760LM| ****

120°

| ≥0.9| ≥80| AC: 220 240 50/60Hz| 25,000| >15000| 6| 1500x66x58mm| PC

INTRODUCTION & WARRANTY

  • Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The  company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation.
  • Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

  1. Please make sure to turn off the power before starting the installation.
  2. Installation must be performed by a qualified electrician.
  3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
  4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  5. Terminal block not included. To be connected with Waterproof Cable Hose

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

INSTALLATION INSTRUCTION

  1. Switch OFF the power before starting the installation.
  2. Fasten the two mounting clips to installation surface.
  3.  Open end cap and take out the connector (FIG 1).
  4. Link to power source (FIG 2).
  5. Cover back end cap
  6. Install the lamp to the mounting clips (FIG 3).
  7. Hanging installation type reference (FIG 4).
  8. Switch ON the power to test the light.

V-TAC-VT-6076-LED-Waterproof-Lamp- \(4\)

INSTALLATION DIAGRAM

V-TAC-VT-6076-LED-Waterproof-Lamp- \(5\) V-TAC-
VT-6076-LED-Waterproof-Lamp- \(6\)

LINKABLE CONNECTION

V-TAC-VT-6076-LED-Waterproof-Lamp- \(7\)

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

V-TAC-VT-6076-LED-Waterproof-Lamp- \(8\)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals