Benchmark 51040, 51048 2 Door Warmer, Merchandiser User Guide

Benchmark 51040, 51048 2 Door Warmer, Merchandiser

Product Information

Specifications

• Product: 2-Door Warmer/Merchandiser
• Item No: 51040/51048
• Power: 120V~60 Hz, 600W, 5A

Product Usage Instructions

Safety Instructions

1. Plug the electrical cord into a certified electrical outlet with the corresponding voltage rating.
2. Always unplug the cord when the appliance is not in use or before cleaning and maintenance.
3. Avoid touching hot surfaces and use handles when moving the appliance.
4. Exercise extreme caution when children are around the appliance or when it is left unattended.
5. Avoid using the appliance in wet locations or near water containers.

Assembly Instructions

1. Identify the operator side and customer side of the warmer.
2. Remove packaging ties and tape from shelves and brackets.
3. Position the shelves accordingly for your application.
4. Plug the machine into a properly grounded 120-volt outlet.
5. Turn on the warming element using the front switch.
6. Adjust the thermostat to your desired temperature.
7. Load food products into the warmer as needed.
8. Turn off the machine when not in use.

Cleaning Instructions

1. Turn off and unplug the machine from the power source.
2. Remove any remaining food products from the warmer.
3. Clean shelves in a sink or dishwasher with mild detergent.
4. Clean the base of the unit with a damp cloth and mild detergent.
5. Clean glass panels and cover with standard glass cleaner.
6. Reassemble the machine after cleaning.
7. Plug the machine back into the power source.

FAQs

• Q: Can I use an extension cord with this appliance?
  A: No, using an extension cord is not recommended. Always plug directly into a properly grounded outlet.

• Q: How do I adjust the thermostat?
  A: Use the thermostat dial to set your desired temperature. The light will indicate when the cabinet reaches that temperature.

2– Door Warmer//Merchandiser
Item No: 51040//51048
120V~60 Hz, 600W, 5A

WARNING ELECTRICAL SHOCK HAZARD.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

Electrical ground is required on this appliance.

1. Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
2. Do not use an extension cord with this appliance.
3. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

SAFETY INSTRUCTIONS

1. Plug electrical cord into a certified electrical outlet with a corresponding voltage rating as listed on the machine model labels.
2. Always unplug the electric cord when appliance is not in use and before cleaning, adjusting or maintaining this steamer. Do not operate with a damaged cord or plug or after the machine malfunctions, has been dropped or damaged. Use authorized service for examination, electrical or mechanical adjustment or repair.
3. This equipment will be HOT during use and for a short time after it is turned off. BE CAREFUL. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials away from appliance.
4. Extreme caution is necessary when any appliance is used by or near children and whenever the appliance is left operating and unattended.
5. This appliance is not intended for use in wet locations. Never locate appliance where it may fall into a water container.
   Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electrical shock, fire or damage to the appliance.

ASSEMBLY INSTRUCTIONS

1. The Warmer has an operator side (the side with the controls) and a customer side.
2. Remove the nylon packing ties and tape on the shelves and brackets.
3. For Front Counter Applications you can position the shelves either in a flat or sloping format.
   • For Flat shelves – position the shelves using the corresponding height slots on both sides.
   • For Sloping shelves – position the shelves on higher slots on the operator side.
4. Plug the machine into a properly grounded 120 volt outlet.
5. Turn on the warming element with the front switch.
6. Adjust the thermostat to the desired temperature. (The LIGHT will remain on until the cabinet reaches the set temperature)
7. Load the warmer with the desired amount of food product.
8. Turn the machine off when not in use.

CLEANING

1. Turn off the machine and unplug it from the power source.
2. Remove any remaining food product from the machine.
3. Remove the shelves from the Machine and clean in a sink or dishwasher with mild detergent.
4. Clean out any food product from the base of unit with a damp cloth and mild detergent.
5. Clean the glass panels and cover with any standard glass cleaner.
6. Re-assemble the machine.
7. Plug the machine back into the 120 volt power source.

DIAGRAM

PARTS LIST

Wiring Diagram

Documents / Resources

| Benchmark 51040, 51048 2 Door Warmer, Merchandiser [pdf] User Guide
51040, 51048, 51040 51048 2 Door Warmer Merchandiser, 51040 2 Door Warmer Merchandiser, 51048 2 Door Warmer Merchandiser, 2 Door Warmer Merchandiser, 2 Door Warmer, 2 Door Merchandiser, Warmer Merchandiser, Warmer, Merchandiser
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>