EWEADN Q5 Wireless Mouse Installation Guide
- June 28, 2024
- EWEADN
Table of Contents
EWEADN Q5 Wireless Mouse
Scope of product application
- The mouse adopts Bluetooth 5.0 standard/2.4G standard, with two working modes connected to related devices for control.
- The 2.4G mode of the product can run on computer systems such as Win2000, WindXP, Vista, Win7, Win8, Win10, MAC, etc. Bluetooth mode can run on mobile phone systems with Bluetooth versions.
Hardware requirements
- A mobile phone or computer with Bluetooth 5.0 standard and a USB port available for connecting devices.
Key Description
- Left click
- Right click
- Roller/middle key Bluetooth switching (long press the middle button for 3 seconds)
- Boss button, one click returns to the desktop
- Backspace
- Forward key
- Power display
- Charging port
- Indicator lights.
- Greenlight (2.4G)
- Blue lights (Bluetooth)
- red lights (DPI indicator light)
- DPI switching (three gear DPI)
- DPI switching (three gear DPI)
- Power switch, up 2.4G, down OFF
- 2.4G receiver
2.4G installation steps and instructions for use
Turn on the power switch. When the green light flashes, it is in 2.4G mode. When the blue light flashes, it is in Bluetooth mode. If you need to switch, press the middle button for 3-4 seconds to switch to the corresponding mode. Then, remove the 2.4G mouse receiver and plug it into the idle USB port on the computer. At this time, the computer will automatically install configuration software. When the computer prompts that the installation is completed and can be used, the mouse can be connected to the computer. If the receiver computer does not respond when plugged in, it needs to be replaced with another USB port. At this time, the computer will automatically match the code and install the corresponding adapter software. Generally, the computer will prompt; The installation is completed and can be used, which indicates that the mouse and computer 2.4G have successfully matched.
Bluetooth installation steps and usage instructions
Turn on the power switch, press and hold the mouse scroll wheel/middle button for 3 seconds, turn on Bluetooth mode (indicator light is blue), and then turn on the phone’s Bluetooth. When “Q5” appears on the phone, directly click to connect, so that the Bluetooth connection between the phone and the mouse can be completed. 2. Installation steps and usage of mouse Bluetooth connection on computer: Open Bluetooth mode, and first click (Start) on the computer to select “Control Panel” and then click “Add Device”. The computer will display the “Add Device” interface. When the mouse icon appears on the computer interface, click “Q5” again, and then select “Add Device” and follow the prompts to connect the computer and mouse Bluetooth. The installation methods of different systems mayvary.
List of items
- Mouse
- One 2.4G receiver
- One charging cable
- One manual warranty card
Quality assurance card
Thank you for purchasing the products of our EWEADN. Thank you very much! To ensure that you can use this product with peace of mind and better protect your rights, our company strictly implements the joint information product department of the General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China And the “Repair, Replacement, and Retum of Microcomputer Products” jointly issued by the State Administration for Industry and Commerce based on the Goods Liability Regulations, we implement after-sales service and hereby make the following commitments:
Service validity period:
- Effective from the date of purchase, the date recorded in this certificate shall prevail.
Service content:
- From the date of purchase, any product malfunctions caused by poor electrical performance will be free of charge during the warranty period Perform repairs. (The specific maintenance matters shall be handled by the provincial representative or the former product headquarters in the region)
Not within the scope of services:
- Those who have exceeded the effective service or free repair period.
- Failure to use, maintain, or store according to the correct instructions, resulting in malfunction or damage.
- Malfunctions or damages caused by unauthorized repair agencies for products that are not EWEADN.
- Products without dealer registration information and seal on the three guarantee certificates.
- Unauthorized alteration of the content of the three guarantees certificate.
- Consumers can remove the QC PASS sticker at the bottom of the product themselves.
- Defective products caused by force majeure (such as earthquakes, fires, floods).
- Product defects caused by human factors (such as operational errors, handling damage, bumps, input discrepancies) Suitable voltage, etc.
- Other malfunctions or damages caused by nonproduct design, technology, manufacturing, quality, and other issues.
This certificate is an important basis for the after-sales service of the products of the EWEADN. Please keep it safe! Note: Please fill in each item clearly, do not make unauthorized changes, and keep t warranty service card properly, To safeguard your legitimate rights and interests. If you need service or have any questions, please consult your local dealer or contact us.
Yuandao Industrial (Shenzhen) Co., Ltd., Room 1610, 16th Floor, Jinhao Building.
- No. 109, Fuyong Section, Guangshen Road, Bao’an District, Shenzhen
- Jiangxi Jichi Technology Co., Ltd. Building 3, Godfrey Industrial
- Park, Lvbao Avenue, Qingyuan District, Ji an City, Jiangxi Province
- Contact number: 0755-23089616
- Website: www.eweadn.cn
- Product execution standard number:Mouse GB/T 26245-2010
- Keyboard:GB/T 14081-2010
Attention: The product images are for reference only and may differ from the actual product. Please refer to the actual product. We apologize for any inconvenience caused!
FCC STATEMENT
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction,
CONTACT
- Authorized by: Yuandao Industrial (Shenzhen) Co., Ltd
- Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road,
- Bao’an District, Shenzhen
- Manufacturer: Jiangxi Jichi Technology Co., Ltd
- Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an City, Jiangxi Province
- Contact phone number: 0755-23089516
- Website: www.eweadn.cn
- Product execution standard number: Mouse GB/T 26245-2010
Attention: The product images are for reference only and may differ from
the actual product.
Please referto the actual product. We apologize for any inconvenience caused!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>