EWEADN V97 Bimode Keyboard Installation Guide
- June 1, 2024
- EWEADN
Table of Contents
EWEADN V97 Bimode Keyboard
- Keyboard x1 2.4G receiver (stored on the back of the keyboard) x1
- User manual x1
- USB TYPE-C cable x1
Shortcut Key Description
FN combination function
Single press function key
Description of lighting effects
Backlight control
Switch the order of light colours too
RGB Flowing light(default)Neon, circular breathing, mixed colours always
bright, Everbright red, Everbright green, Everbright blue, Everbright orange,
Everbright green, Everbright purple, Everbright white, extinguished.
Knob and multifunctional key description
The three multimedia buttons in the upper right corner are Previous Track,
play/pause, and Next Track.
Knob Definition
- Backlight mode, default slightly adjustable backlight mode.
- Press once to switch backlight effects in sequence,
- Turn left to adjust the backlight brightness to decrease, and turn right to adjust the backlight brightness to increase by a total of 10 levels.
- Volume mode, Long press the 3S scroll wheel to switch to the adjustment system volume mode (the backlight flashes red three times to restore the last backlight effect), turn left to adjust the system volume to decrease, turn right to adjust the system volume to increase, and press mute. Press and hold the 3S knob again to enter the default backlight adjustment mode (the backlight flashes blue three times to restore the previous backlight effect).
Mode pairing settings
2.4G mode: Turn the switch to ON and turn on the power switch. When FN+4
enters 2.4G mode, the green light will be on. Insert a dedicated receiver that
has been paired, and if pairing is successful, the green light will stop. The
keyboard can be used normally.
Bluetooth mode: Turn the switch to ON to turn on the power switch, with a
total of three Bluetooth channels: FN+1=blue Tooth
- 1 (blue); FN+2=Bluetooth 2 (purple); FN+3=Bluetooth 3 (blue)
- Turn on the device BluetoothPair successfully, and once the corresponding light goes out, the keyboard can be used normally.
- Bluetooth name It is called (EWEADN-V97
Authorized by: Yuandao Industrial (Shenzhen) Co., Ltd
- Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road, Bao’an District,
- Shenzhen Manufacturer: Jiangxi Jichi Technology Co., Ltd
- Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji’an City, Jiangxi Province
- Contact number: 0755-23089616
- Website: www.eweadn.cn
- Product execution standard number: Mouse GB/T 26245-2010
- Attention: The product images are for reference only and may differ from the actual product.
- Please refer to the actual product. We apologize for any inconvenience caused!
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interterence received, including interterence that may cause undesired operation. Any changes or moditications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.