TRANE Foundation 3 to 5 Tons Packaged Rooftop Units User Guide
- July 13, 2024
- Trane
Table of Contents
TRANE Foundation 3 to 5 Tons Packaged Rooftop Units
Specifications
- Model Number: EDK GDK
- Unit Capacity: 3 to 5 Tons
- Unit Length (UL): 76.814 in.
- Unit Width (UW): 47.934 in.
- Unit Height (UH): 42.004 in.
- Net Weight: 524-586 lbs (depending on model)
- Cooling Performance: 38,000 to 59,500 Btu/h
- Gas Heating Performance: 72,000 to 115,000 Btu/h
Copyright
This document and the information in it are the property of Trane, and may not
be used or reproduced in whole or in part without written permission. Trane
reserves the right to revise this publication at any time, and to make changes
to its content without obligation to notify any person of such revision or
change.
Trademarks
All trademarks referenced in this document are the trademarks of their
respective owners.
List of Options
Note: Most factory installed options are available for downflow air
discharge units only. Verify with ordering system for availability.
Table 1. List of options
Table 2. 3 to 5 tons packaged rooftop performance data (gas or electric heat)
- (a) Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb.
- (b) EER and SEER are rated at AHRI conditions and calculated in accordance with AHRI Standard 210/240-2017. Airflow and net cooling capacity not shown.
- (c) EER2 and SEER2 are rated at AHRI conditions and certified in accordance with AHRI Standard 210/240-2023.
Table 3. Unit MCA and MOP electrical data (standard indoor fan motor cooling or gas heat)
(a) Values do not include Power Exhaust accessory.
Table 4. Unit indoor fan data
Table 5. Unit dimensional data
(a) Dimensions are for curb openings and not duct inserts. Reference the product catalog for duct insert dimensions.
Trane and American Standard create comfortable, energy-efficient indoor
environments for commercial and residential applications. For more
information, please visit trane.com or
americanstandardair.com.
Trane and American Standard have a policy of continuous product and product
data improvement and reserve the right to change design and specifications
without notice. We are committed to using environmentally conscious print
practices.
RT-PRC114A-EN 12 Jul 2024 (NEW)
FAQ
- Q: What should I do if the unit is not cooling or heating properly?
- A: Check the thermostat settings, air filters, and ensure proper airflow around the unit. If issues persist, contact a certified technician for further inspection.
- Q: Can I install additional options or accessories after the initial setup?
- A: Some options may be field-installed, but it’s recommended to consult with the manufacturer or a professional technician for proper installation and compatibility.
- Q: How often should I schedule maintenance for the unit?
- A: Annual maintenance checks are recommended to keep the unit running efficiently and to address any potential issues before they escalate.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>