Boori BK-THKSLB Treehouse King Single Loft Bed Installation Guide

Boori BK-THKSLB Treehouse King Single Loft Bed

Product Specifications

• Product Name : Treehouse King Single Loft Bed (BK-THKSLB)
• Main Materials: European Beech / Plywood / LVL
• Parts List: M4

Product Usage Instructions

Assembly
Follow the assembly instructions provided in the manual. Use only spare parts approved by the manufacturer.

Warnings

1. Do not leave the child unattended while using the bed.
2. Avoid using the bed for children under six years due to fall risk.
3. Avoid strangulation risks by not attaching or hanging items on the bed.
4. Ensure a safe distance between the bed and adjoining structures to prevent trapping.
5. Check for broken or missing parts before use.
6. Follow the manufacturer’s instructions at all times.
7. Use recommended mattress sizes and ensure proper ventilation in the room.
8. Regularly check and tighten all assembly fastenings.

Treehouse King Single Loft Bed

• Dimensions (External: 2212x1295x1704(mm)
  

• Main Materials: European Beech/ Plywood/ LVL

Hardware

Parts List

ASSEMBLY

Note: Please insert bolts into remaining holes as illustrated to avoid little fingers getting stuck

Matching BA-KSBRF / BA-KSBCK / BA-LOB sold separately.

NOTE: Use only spare parts apurer

WARNING : Do not leave the child unattended

1. WARNING: “High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury from falls”;

2. WARNING: “Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags”;

3. WARNING: “Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards), and the like. To avoid the risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75 mm or shall be more than 230 mm”;

4. WARNING: Do not use the bunk bed/high bed if any structural part is broken or missing ;

5. always follow the manufacturer’s instructions ;

6. Recommended Bottom Mattress size: 2020 x 1210. The mattress thickness must be less than 140mm ;
   Recommended Top Mattress size: 2020 x 1210. The mattress thickness must be less than 140mm ;

7. Ventilation of the room is necessary to keep the humidity low and to prevent mold in and around the bed ;

8. To check regularly that all assembly fastenings are properly tightened;

9. This product is certified to comply with EN 747 : 2012+A1: 2015

   • a. A warning and statement as follows
     WARNING: TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND ARE NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9
     Falls from elevated beds can be fatal and deaths have occurred where children have fallen from elevated beds. This is relevant for all ages. The risk is greater for younger children.
     The risk of injury or death from a fall from an elevated bed compared to a non-elevated bed is:

   • 10 x greater for 7-8 year olds

   • 7 x greater for 9-10 year olds

   • 3 x greater for 11-12 year olds

   • b. Children should be discoureged from playing on the bunk bed .

   • c. That the bunk bed should be checked periodically to ensure that the guardrail, access device and other components are maintained in the correct position and state of repair and that all commectors are tight.

   • d. WARNING: The upper bunk must be more than 2 m from any ceiling fan.

We hope you love your new Boori Kids furniture and it becomes an important part of your family home. In order to keep your furniture looking its best, please follow these care instructions.

Assembly

• When assembling your furniture, please follow the assembly instructions and use the tools supplied Boori products should only be assembled by an adult away from children
• Heavy components should be lifted by two people to prevent injury
• Every section that is assembled should be checked after assembly before moving onto the next stage

Product Positioning

• This product is made of timber and is therefore flammable
• Do not place your Boori furniture near open flames, fireplaces or extreme heat sources such as electric or gas heaters
• Do not direct sprayers or humidifiers at the furniture as they can cause damage
• Where possible avoid exposing furniture to extreme changes in temperature. Timber is a natural product and will want to expand and contract as the temperature varies. Extreme temperature variations can damage timber products.
• Avoid direct exposure to sunlight as this can cause our natural timber and plant oil colors to fade.
• Black rubber feet on items such as radios, computers and picture frames can cause marks. Always use a felt mat (not plastic) to protect your Boori furniture
• Do not place in damp environments or areas with high levels of moisture as this encourages mould growth.

Cleaning

• Clean your furniture by wiping with a soft, damp cloth
• If necessary, use a mild soapy solution and wipe clean with a soft cloth
• Do not use strong household cleaners
• Always wipe in the direction of the wood grain, not in circles.
• Wipe up spills immediately with a soft cloth
• Protect the furniture against bedwetting as this can lead to discoloration

Maintenance

• We advise that you regularly check the safety of your furniture
• Ensure all bolts and screws are tightened and check for loose connections, missing parts or sharp or pointed edges
• Avoid contact with sharp objects and hot liquids
• When moving furniture always lift and place it into position; do not drag. We recommend that two people lift or alter the positioning of the furniture

Product testing Standards
Standard : GB 28007-2011 EN 747-1: 2012+ A1: 2015 AS/NZS 4220: 2010

This Boori Kids product (“Product”) (including mattress) carries a full three (3) years manufacturer’s warranty (“Warranty Period”) to the end-purchaser (“the Customer”) as a testimony to the quality and longevity of the product.
This warranty excludes general wear & tear and damage caused, by the Product not being used by its instructions or the care instructions. During this Warranty Period, Boori Australia Pty Ltd (ABN 43 160 962 354) (“Boori”) will replace or repair any defective part. In the event of a Product being replaced, as a whole unit or part thereof during the Warranty Period, the warranty on the replacement will expire three (3) years from the original purchase date.

This guarantee excludes accidental damage, misuse, and or improper transporting and handling.
The warranty is void if the original Product has been altered in design or color in any way.

Subject to the Australian Consumer Law, this Warranty does not apply to any products sold as seconds, floor stock, repaired products, or products that have a defect where this has been drawn to the customer’s attention before the purchase of the product. In addition, this Warranty will not apply if:

• (a) Repairs to a product are made or attempted by a service provider other than one approved by Boori.
• (b) The product has not been used or maintained by the manufacturer’s instructions as provided with the product.
• (c) The customer abnormally uses the product for example if the product is abused, misused, dropped, crushed, impacted with any hard surface, exposed to extreme heat (including fire) or cold, not maintained properly or used after partial failure.
• (d) The product has been modified, incorrectly adjusted or operated, subjected to incorrect electrical supply or inconsistent electrical supply or used with inappropriate accessories.
• (e) The product is tampered with in any way

All warranty claims must be lodged:

1. at the place of original purchase as set out on your receipt for purchase of the Products or you may contact Boori on 02 9833 3769 to obtain further details; and
2. together with proof of purchase.

Where the Customer claims under this Warranty, all expenses incurred in sending the Products to Boori are the Customer’s responsibility.
Boori’s liability in respect of a breach of a consumer guarantee or any warranty made under this Warranty for any Products not of a kind ordinarily acquired for personal, domestic or household use is limited, in relation to the Products to the extent permissible by law and at it’s option to:

1. replacing the Products or the supply of equivalent Products;
2. the repair of the Products;
3. the payment of the cost of replacing the Products or of acquiring equivalent goods; or
4. the payment of the cost of having the Products repaired.

To the extent permitted by law, all other warranties whether implied or otherwise, not set out in this Warranty are excluded and Boori is not liable in contract, tort (including, without limitation, negligence or breach of statutory duty) or otherwise to compensate the Customer for:

1. any increased costs or expenses;
2. any loss of profit, revenue, business, contracts or anticipated savings;
3. any loss or expense resulting from a claim by a third party; or
4. any special, indirect, or consequential loss or damage of any nature whatsoever caused by the Customer’s failure to comply with its obligations.

Limitations on Warranty Disclaimers
In the following paragraph, ‘Our’ means ‘Boori’, ‘You’ means ‘the Customer’, and ‘goods’ means ‘Products’: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund tor a major ailure and for compensation for any other reasonably foreseeable loss or damage, You are also entitled to have or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The benefits given to the Customer in this Warranty are in addition to other rights and remedies under a law with the
Products to which this warranty applies.

All Boori products (including mattresses) carry a full three (3) years manufacturer’s warranty as testimony to the quality and longevity of the range. This warranty excludes general wear & tear and damage caused, by the product not being used per its instructions or the care instructions.

During this guarantee period, Boori will replace or repair any defective part. In the event of a product being replaced, as a whole unit or part thereof during the guarantee period, the guarantee on the replacement will expire three (3) years from the original purchase date.

• This guarantee excludes accidental damage, misuse, and or improper transporting and handling.
• The warranty is void if the original product has been altered in design or color in any way.
• All warranty claims must be lodged at the place of original purchase and proof of purchase must be provided in order to lodge a warranty claim.

MORE INFORMATION

Boori Australia Pty Ltd

11/4 Southridge Street
Eastern Creek NSW 2766
Tel: +61 2 9833 3769
www.haori.com.aul

Boori (Europe) Ltd

• Unit 1 Riverside House,
• Mill Lane, Newbury,
• Berkshire, RG14 5QS UK
• Tel: +44 016 3529 5670
• www.boori.co.uk

Frequently Asked Questions

• Q: What are the recommended mattress sizes for the Treehouse King Single Loft Bed?
  • A: The recommended Bottom Mattress size is 2020 x 1210. The mattress thickness must be less than 140mm. The recommended Top Mattress size is also 2020 x 1210 with a thickness of less than 140mm.
• Q: What precautions should I take when using elevated beds?
  • A: Elevated beds are not recommended for children under the age of 9. Always supervise children using the bed, discourage playing on bunk beds, and ensure a safe environment to prevent falls and injuries.

References

• Boori UK | Baby Nursery & Kids Furniture
• Boori UK | Baby Nursery & Kids Furniture
• Furniture Online | Nursery, Kids & Grown-Ups Online Furniture Store – Boori Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>