Boori V23 Perla Cot Bed Installation Guide

June 13, 2024
Boori

V23 Perla Cot Bed

“`html

Product Specifications:

  • Product Name: Perla Cot Bed
  • Model Number: B-PECBv23
  • Main Materials: European Beech / LVL
  • Manufacturer: Boori Australia Pty Ltd
  • Website: www.boori.com.au

Product Usage Instructions:

Assembly Instructions:

  1. Do not tighten the bolts initially.

  2. Ensure the sticker side of the base is facing up.

  3. Use the top holes for high base position for newborns and
    bottom holes for low base position when the baby can sit or pull
    themselves up.

  4. Tighten all connecting bolts.

  5. Lower the base height before the child is able to sit up or
    pull themselves up.

  6. To convert the cot to a toddler bed, follow the provided
    instructions carefully.

Safety Instructions:

  • Regularly check all connecting bolts and glide pins to ensure
    safety.

  • Maximum mattress thickness should not exceed 120mm.

  • Adjust the mattress base to the lowest position before the
    child can sit up.

  • Place the cot at a safe distance from curtains, blinds,
    heaters, and power points.

  • Avoid keeping toys, cushions, or any items that could pose a
    suffocation risk in the cot.

  • Keep small items out of reach from any position in the
    cot.

Care Instructions:

Congratulations on choosing a Boori product! To preserve its
beauty and durability:

  • Regularly check and tighten any loose parts.

  • Avoid exposure to direct sunlight or extreme temperatures.

  • Clean with a damp cloth and mild detergent. Do not use abrasive
    cleaners.

  • Avoid dragging or pushing furniture to prevent damage.

FAQ (Frequently Asked Questions):

Q: Can I use any spare parts for this cot bed?

A: No, only spare parts approved by the manufacturer should be
used to maintain safety standards.

Q: How often should I check the connecting bolts and glide

pins?

A: It is recommended to regularly check these components to
ensure the safety of the cot.

“`

Perla
Cot Bed

B-PECBv23

Boori Australia Pty Ltd 11/4 Southridge Street Eastern Creek NSW 2766 Tel: +61 2 9833 3769 www.boori.com.au

Boori (Europe) Ltd Unit 1 Riverside House, Mill Lane, Newbury, Berkshire, RG14 5QS UK Tel: +44 016 3529 5670 www.boori.co.uk

141-0022 1-10-9ST8F TEL:03-6420-0024 EMAIL:info@boori.co.jp HP:www.boori.jp

Perla Cot Bed (B-PECBv23)

0573-83885718 www.boori.com 314002

Dimensions (External / ): 1377×761×886(mm) (Internal / ): 1330×715(mm)

Main Materials: European Beech / LVL : LVL

A × 1

B × 12

Hardware / C × 6 D × 4 E × 4 F × 20

M6×70mm

M6×47mm

M6×28mm

M6×18mm

M6×14mm

Parts List /

×

×

×

×
Note: Use only spare parts approved by the manufacturer.
Ver 2.0

×
B-PECBv23 1/6

Assembly /

1

Do not tighten the bolts for now.

1

Sticker side of the base must

face up.

Use the top holes for high base position (for newborns) :

1

C × 4

Use the bottom holes for low base position (for when baby can sit or pull themselves up). :
Base should be in the lower position before child is able to sit up.

2
C

C × 4
2

B+F
B+F
3

B × 4
Ver 2.0

F × 4

B

F

B

F

B-PECBv23 2/6

Assembly /

3

4

4

B B × 2
4
3
B (B+F) × 4

B B
B

B × 6
Ver 2.0

F × 4

B-PECBv23 3/6

Assembly /

5

Tighten all the connecting bolts.

F

5

F × 4
6

Note: Please insert bolts into remaining holes as illustrated to avoid little fingers getting stuck.

E + F

E × 4
Ver 2.0

F × 4

E + F

E + F
B-PECBv23 4/6

7

Lowering the base height.

Assembly /

C E + F

C E + F

C
E + F
Base should be in the lower position before child is able to sit up or pull themself up.

E + F C
Ver 2.0

E + F C

E + F C
B-PECBv23 5/6

CONVERT YOUR COT TO TODDLER BED /
1

Remove

Remove

2

/CVEJKPI7PKXGTUCN6QFFNGT)WCTF2CPGN
$Ä6)2UQNFUGRCTCVGN[ (B-TGP)

B-TGP

D + F

C × 2

D × 4
Ver 2.0

F × 4

D + F C
D + F

D + F
B-PECBv23 6/6

Assembly instructions
NOTE: Use only spare parts approved by the manufacturer
FOR AUSTRALIA AND NEW ZEALAND (AS/NZS 2172:2013) RECOMMENDED MATTRESS SIZE 1320mm X 700mm X 120mm This cot has been manufactured for use with a mattress which measures 700mm wide by 1320mm long and 120 mm in thickness . The width and length are specified because it is important that the gaps between the mattress and the sides and ends of the cot will not exceed 40mm when the mattress is pushed to one side or end , and 20 mm when the mattress is centred in the cot . The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 500 mm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot.
WARNING: TO ENSURE THE SAFETY OF YOUR COT,REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS
MAKING SURE THEY ARE TIGHT.
TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 120MM WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP.
Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised. Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points. Keep cot free of any toys, cushions etc that could be used as a foothold or present a danger of suffocation or
strangulation. Keep medication, String, elastic or small items such as money out of reach from any position in the cot.
FOR THE UK ( EN 716-1-2 : 2017+AC : 2019 ) RECOMMENDED MATTRESS SIZE 1320mm X 700mm x 120mm If you leave the child unattended in the cot, always make sure that the dropside is in the highest position. This cot has been manufactured for use with a mattress which measures 700mm wide by 1320mm long and a maximum thickness of 120mm. The width and length shall be such that the gap between the mattress and the sides and ends does not exceed 30mm. The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower position and 200mm with the mattress in the highest position to minimise the risk of a child climbing or falling out of the cot.
WARNING:
TO ENSURE THE SAFETY OF YOUR COT , REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS
MAKING SURE THEY ARE TIGHT, CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING (EG. Strings, necklaces,ribbons for babies dummies), WHICH WOULD POSE A RISK OF STRANGULATION. TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 120MM. THE LOWEST POSITION IS THE SAFEST AND THE BASE SHOULD ALWAYS BE USED IN THAT POSITION AS SOON AS THE BABY IS OLD ENOUGH TO SIT UP. TO PREVENT INJURY FROM FALLS WHEN THE CHILD IS ABLE TO CLIMB OUT OF THE COT, THE COT SHALL NO LONGER BE USED FOR THAT CHILD. Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc.in the near vicinity of the cot. * Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.

  • Do not leave anything in the cot or place the cot close to another product,which could provide a foothold or present a danger of suffocation or strangulation, e.g.strings, blind/curtain cords,etc. Do not use more than one mattress in the cot. All assembly fittings should always be tightened properly and that fittings should be checked regularly and retightened as necessary.
    WARNING: ( BS 8509:2008+A1:2011 ) The child’s bed conforms to BS 8509:2008 +A1:2011 Recommended mattress size 1320mm x 700mm x 120mm Suitable for use in Toddler bed mode for a child from 18 months to 4 years old. Do not place this child’s bed near heat sources, windows and other furniture. Do not use this child’s bed if any part is broken, torn or missing. The bed is designed to be dismantled for storage or transportation. All assembly fittings should always be tightened properly and checked periodically. Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed too close
    to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either tight to any wall or have a gap of 300mm between the wall and the side of the bed.

wood products

five 5 years

five 5

Warranty against defects
For Australia only (updated 07/15/2023)
Boori Australia Pty Ltd
11/4 Southridge Street Eastern Creek NSW 2766 Australia PH:(61 2) 9833 3769 ABN: 43 160 962 354
Boori Care Instructions
Congratulations and thank you for choosing Boori product(s). The furniture you have purchased is constructed from high quality materials for strength and durability. Here are some tips on how you can preserve its beauty for a long time.
1. Do not expose furniture to strong sunlight, direct heat sources, extreme changes in temperature or moisture.
2. Wipe up spills immediately with a soft, clean cloth. 3. Urine spills on furniture can cause discolouration. 4. Clean furniture by wiping the surface with a soft cloth dampened with water. 5. If necessary clean furniture using a mild soap solution and wipe clean with a soft cloth
dampened with water and then dry with soft clean cloth. 6. Do not use strong household cleaners. 7. Always wipe in the direction of the grain in the wood do not wipe in a circular motion. 8. Avoid contact with sharp objects, or containers containing hot liquid. 9. Avoid contact with `rubber feet’ on items such as radios, computers, telephones etc. Use a felt
mat (not plastic) to protect furniture surfaces. 10. Do not open more than one drawer at a time. 11. When moving furniture do not drag, always lift and place in position.
Boori Warranty (“this Warranty”)
All Boori Collection wood products (“Boori Wood Products”) carry a full five (5) years manufacturer’s warranty (“Warranty Period”) to the end-purchaser (“the Customer”) as testimony to the quality and longevity of the range. This warranty excludes general wear & tear and damage caused, by the Boori Product not being used in accordance with its instructions or the care instructions. During this Warranty Period Boori Australia Pty Ltd (ABN 43 160 962 354) (“Boori”) will replace or repair any defective part. In the event of a Boori Product being replaced, as a whole unit or part thereof during the Warranty Period, the warranty on the replacement will expire five (5) years from the original purchase date.
This guarantee excludes accidental damage, misuse and or improper transporting and handling.
Boori Australia Pty Ltd,11/4 Southridge Street Eastern Creek NSW 2766 Australia. PH:(61 2) 9833 3769 www.boori.com.au

The warranty is void if the original Boori Product has been altered in design or colour in anyway.
All warranty claims must be lodged:
1. at the place of original purchase as set out on your receipt for purchase of the Boori Products or you may contact Boori on 9833 3769 to obtain further details;and
2. together with a proof of purchase.
Where the Customer makes a claim pursuant to this Warranty, all expenses incurred in sending the Boori Products to Boori are the Customer’s responsibility.
Boori’s liability in respect of a breach of a consumer guarantee or any warranty made under this Warranty for any Boori Products not of a kind ordinarily acquired for personal, domestic or household use is limited, in relation to the Boori Products to the extent permissible by law and at it’s option to:
1. replacing the Boori Products or the supply of equivalent Boori Products;
2. the repair of the Boori Products;
3. the payment of the cost of replacing the Boori Products or of acquiring equivalent goods; or
4. the payment of the cost of having the Boori Products repaired.
To the extent permitted by law, all other warranties whether implied or otherwise, not set out in this Warranty are excluded and Boori is not liable in contract, tort (including, without limitation, negligence or breach of statutory duty) or otherwise to compensate the Customer for:
1. any increased costs or expenses; 2. any loss of profit, revenue, business, contracts or anticipated savings;
3. any loss or expense resulting from a claim by a third party; or
4. any special, indirect or consequential loss or damage of any nature whatsoever caused by the Customer’s failure in complying with its obligations.
Limitations on Warranty Disclaimers
In the following paragraph, Our’ meansBoori’, You’ meansthe Customer’ and goods’ meansBoori Products’:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given to the Customer in this Warranty are in addition to other rights and remedies under a law in relation to the Boori Products to which this warranty applies.
Boori Australia Pty Ltd,11/4 Southridge Street Eastern Creek NSW 2766 Australia. PH:(61 2) 9833 3769 www.boori.com.au

QB 2453.1-1999 QB/T 2453.2-1999

GB 18584-2001

EN 716-1-2:2017+AC:2019 BS 8509:2008+A1:2011 AS/NZS 2172-2013

() Boori
() 1. :
2. :
3. :

() “””
1. 2. 3. “””” 4. “” 5. “”
() 1. 2. 3.

FAQ
() Boori Boori1993 800HarrodsDavid JonesJohn Lewis “Boori””BooriKIDS” 0-18 () Boori Boori50FSC BooriUL () Boori

1/3

() Boori BooriBoori Boori () www.boori.com “Boori”

() ()
() () () ,()500mm 200mm () () 1320mm*700mm120mm () () () ()

BooriBoori 1. 2. 3. 4. 5. 6. 7. 8. ()
2/3

9. 10. 1 1.
12.

Boori 1. 2-3
2.
3. 4. 5. 2-3 6.

12 12 1. 2. 3.

: () Boori0573-8388 5718

3/3

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals