Pourcare T00K8 Anti Gravity Sound Humidifier Instruction Manual
- July 13, 2024
- Pourcare
Table of Contents
Pourcare T00K8 Anti Gravity Sound Humidifier
Before use: please use purified water
Do not use alcohol essential oil aroma therapy etc.
Thank you for choosing this product. In order to give full play to the product functions, Please read this manual carefully before use, And please keep it securely for easy reference.
Important points to Note
- In order to ensure the quality of the product, before leaving the factory will be solid water test, after receiving the product has a small amount of water droplets residue, is a normal phenomenon.
- The shape and spacing of each water droplet in the product are different, and it is normal that the water droplet produced by each product is different.
- As the gas in the water pipe is not exhausted, it is normal for the water droplet to have a delay(water droplet does not form)when slarling the machine, and the delay is about 30s-60s Left and right the water wi from naturally, please be patent.
Product schematic diagram
- Press the power button to turn on and then turn off;
- Press the light button to change the color of the colored lights;
- Press the “+” button to move on to the next song.and long press to increase the sound;
- Press and hold the “_” button to go back to the previous song, then press and hold to decrease the volume.
- Charging port;
- Can connect to Bluetooth to play music (Bluetooth name: TOOK8)
Technical parameters
Product operation instructions
- Unscrew the top cover.
- Fill the tank with pure water.
- Power on the adapter.
- Touch the button and fog begins.
Content list
- Anti-gravity humidifier*1
- Charge Cable*1
- Instruction Manual*1
Common Failures and Troubleshooting
| Malfunction | Reason | Solution |
|---|---|---|
| Can not start | Wrong power adapter | Use a 5V-2A power adapter before turning |
it on again
Can not generate Mist or substantaly little mist| There may be dirt in the
atomizer piece that is clogging the hole at the bottom of the atomization
place.| Use a cotton swab dipped in white vinegar to gently wipe the
atomization place to clean the dirt, and replace a new ultrasonic atomization
piece
Can not from Water drops| Not sufficient water
in the water tank
| Fill water into the tank until it
reaches the water line
Delayed start-up, empty pump| Restart again
Wrong power adapter| Use a 5V-2A power adapter
before turning it on again
LED
does not light up
| Motherboard burned out| Contact after-sales service
Cable not connected properly| Reconnect the cable or change
the power adapter
Button can not be pressed| The button is jamed| Contact after-sales service
Button Malfunction| Motherboard burned out| Contact after-sales service
After-sales service card
- Product Name:……………………………………………………
- Date of Purchase:………………………………………………………….
- Name:………………………………………………………………………………………..
- Contact Address:………………………………………………………………………………………….
- Distributor Address:…………………………………………………………………………………….
- Distributor Name:………………………………………………………………………………..
- Distributor Contact Number:…………………………………………………………………………….
We implement paid services for the following situations: users modify or install other functions The damage caused by the repair and disassembly of the faulty machine; Improper transportation and storage by the user or failure to follow the instructions Damage caused by required use; The warranty certificate is altered; Without warranty certificate and valid invoice or major parts Exceeding the corresponding warranty period.
Tips:
- This product warranty card is the only proof of product warranty. Please keep it properly.
- The relevant product warranty regulations shall be subject to the terms of After-sales Service.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>