Rugged Tablets RESILIENT 8 Inch Rugged Android Tablet User Guide
- June 10, 2024
- Rugged Tablets
Table of Contents
Rugged Tablets RESILIENT 8 Inch Rugged Android Tablet
Turning on your tablet
- The Power button is located on the top of your tablet. Press and hold it for 5-70 seconds to turn the device on or off
Enabling Tablet Mode
- Go to your Desktop
- Select the chat bubble notification icon on the bottom right corner of the screen.
- Click on the “Tablet Mode” box
Changing the brightness on your tablet
- On the home screen, press the message icon on the bottom-right of the screen to reveal the quick-access menu.
- Move the slider at the bottom of the quick-access menu to change the brightness level.
Connect to a Wi•Fi Network
- On the home screen, press the message icon on the bottom-right of the screen to reveal the quick access menu.
- Tap the “Network” Icon to open the Wi-Fi menu.
- Select the Wi-Fi network you’d like to connect to.
Connect to a Bluetooth device
- On the home screen, press the message icon on the bottom-right of the screen to reveal the quick access menu.
- Tap the “Bluetooth” Icon to open the Bluetooth menu.
Select the Bluetooth device you’d like to connect to.
Contact us
- Website:www.ruggedtablets.com
- Email:info@minnotablet.com
- Phone: +l805-962-3084
Front View
Back View
Side View
Memory & SIM INSTALLATION
Slide out the card tray and Insert the Micro SD (down) and Nano SIM (Up) card
into the corresponding slots.
The slots a re located underneath the battery on the tablet.
Battery Swap
Install the battery in the correct order. 
- Remove all screws on the back of the battery cover
- Disengage the two battery locks
- Lift the battery out of the tablet
- Replace the battery
- Push the battery back into the pins
- Re-engage the battery lock
- Insert and tighten all screws
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>