EggShell SPF-PB-01-C Sphere Microchip Pet Feeder User Guide

EggShell SPF-PB-01-C Sphere Microchip Pet Feeder

Specification

• Model: XYZ-2000
• Dimensions: 10in x 5in x 3in
• Weight: 2 lbs
• Power Source: AC adapter (included)
• Capacity: Up to 500ml

Product Information

The XYZ-2000 is a versatile and compact device designed to help you with various tasks. Its sleek design and user-friendly interface make it suitable for both home and office use. With a capacity of up to 500ml, it can efficiently handle a wide range of applications.

Product Usage Instructions

1. Setup:
   Before using the XYZ-2000, ensure that it is placed on a flat, stable surface near a power outlet. Connect the AC adapter to the device and plug it into the power source.

2.   Operation :
   To start the device, press the power button located on the control panel. Use the intuitive interface to select the desired settings or functions based on your requirements.

3. Maintenance
   Regularly clean the XYZ-2000 according to the instructions provided in the user manual. Ensure that the device is unplugged before cleaning and avoid using harsh chemicals that may damage its components.

Frequently Asked Questions (FAQ):

• Q: Can I use the XYZ-2000 for both hot and cold liquids?
  A: Yes, the XYZ-2000 is designed to handle a wide range of temperatures, making it suitable for both hot and cold liquids.

• Q: How often should I refill the XYZ-2000?
  A: The frequency of refilling depends on your usage. It is recommended to refill the device when the liquid level is low to ensure optimal performance.

Thank you very much for purchasing our products. Please read the user manual and all related information carefully and keep it for future reference.

Specification

Accessories Details

Due to product upgrades and optimization, if the product image is slightly different from the actual product, please refer to the actual product.

Product Composition

• 0 Anti-pinch strip
• 1 Revolving door
• 2 Food window
• 3 Feeder upper cover
• 4 Control Panel
• 5 Feeder base
• 6 Cover unlock button
• Anti-fall shee

Operating Instructions

Connecting power
Open the anti-fall sheet, insert the power cord into the power socket at the bottom, snap the cord into the slot, and turn on the power switch. It’s recommended to install 4pcs new AA battries at the same time(batteries not included), which will automatically switch after a power outage,ensure the normal operation of the feeder. Note: The power of 4pcs AA battery is limited, can last about 48 hours depending on use.

• Unlock/Lock button
  Press and hold for 2 seconds to unlock, short press to lock

• Left key
  Page left, digital adjustment decrease

• Open/Close door key
  Press and hold for 1 second to open or close the door

• Return key
  Return to the previous action or previous menu

• Right key
  Page right, digital adjustment increase

• Menu/Confirm key
  Click to enter the menu on the home page, and click to confirm in the menu

• Feeding plan mode
  Shows the current feeding mode or feeding plan

• Voice recording status
  Shows whether voice recording has been set up

• Tag identification status
  Shows written RFID tag

• Power supply
  Shows  the current power supply or battery supply mode

Time Setting
Menu > Time setting > Hour setting > Minute setting > Confirm

• In order to execute the feeding plan normally under the three feeding plans, please be sure to set the local time.

• RFID Writing
  Menu > Adding ID > Choose the ID number > Place the RFID tag near the feeder door > Enter Successfully > Confirm

• Feeder support writing up to 3 tags .

• RFID Deleting
  Menu > Adding ID > Delete ID > Choose the ID number > Delete ID Successfully > Confirm

•  Deleting the ID does not require the RFID tag to be close the feeding window.

• Voice Recording
  Menu>Voice Recording>Start to record voice(longest 10s)> Confirm

• If the recording is less than 10 seconds, you can directly press the menu button to jump to the next step.

• After successful written, the corresponding icon will be shown in the upper left corner of the homepage.

• The voice message will be played while the feeding plan is executed. Re-written will cover the last voice.

Voice playback
Menu>Voice Recording>Voice playbac

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Feeding Plan

1. Free mode (Default mode) Anytime identify the RFID tag, the door will open Menu > Feeding Plan > Free Mode > Confirm

2. 3 meals/day Menu > Feeding Plan > 3 meals/day > Confirm The three meals are set at 7:00-11:30 12:00-17:30 18:00-6:30+1 During each feeding period, the door will open 2 minutes when identify the RFID tag.

3.  4 meals/day Menu > Feeding Plan > 3 meals/day > Confirm

   • The four meals are set at 7:00-11:30 12:00-17:30 18:00-21:30 22:00-6:30+1 During each feeding period, the door will open 2 minutes when identify the RFID tag.

4. Custom Mode
   Menu > Feeding Plan > Custom mode > Add > Choose 1-9 meals > Set feeding time

   Set how long can eat(1-10min) > Confirm

   • When set the feeding plan, the door can be identified open once within the next half hour. For example: set 08:30, during 08:30-09:00, can identify the ID once, and the door open 1-10 minute (based on your set)
     Note: Under Custom Mode, each feeding time set needs to be at least 30 minutes apart.

Take out/Put in food bowl

1. Press and hold the unlock button for 2 seconds.
2. Press and hold the open/close button for 1 second
3. After taking out the food bowl to fill it with food or cleaning it, put it back again.
4. Press and hold the open/close button again for 1 second.

Take off the cover
Press the upper cover unlock button, wait until the upper cover pops open, and then separate it from the feeder body. In order not to affect the normal operation of the feeder, do not add the food beyond the mouth of the howl

• Cover installation Align the cover with the feeder, press down until you hear the cover click into place.
• Please be sure to turn off the power while taking off cover and install cover.

Cleaning & Maintenance

• Make sure to turn off the power and remove the battery while cleaning & maintenance.

Custom Mode Menu > Feeding Plan > Custom mode > Add > Choose 1-9 meals > Set feeding time : Set how long can eat(1-10min) > Confirm

Suggested Training Mode
If your pet is hesitant or scared of the feeder, we suggest you open the door and un power the freer to allow the pet to get comfortable during the feeding process. After a few meals you can power the feeder back on to enable only allowed pets to eat. Please note this process will allow other pets to eat while training is in process.

Troubleshooting

NOTES

• Please use the power adapter that comes with the machine.
• It is FORBIDDEN to place the whole feeder into dishwasher or disinfection cabinet.
• It is FORBIDDEN to use microwave ovens to heat the bow.
• It is FORBIDDEN to use steel balls to clean the bowl.
• The water content should not exceed half a bowl while adding wet food.
• Please do not drop or hit the bowl. If the food bowl is cracked or damaged due to falling or impact, please stop using it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>