BE inspired 53468 Music Madness Headphones Instructions
- July 12, 2024
- BE inspired
Table of Contents
BE inspired 53468 Music Madness Headphones
Personalize with Sticker s and Gems! ****
2 Round Gem Stickers
Use these on the outer ears of your headphones for added Bling!
Puffy Stickers
Decorate your headphones with these fun glittery stickers.
Gem Strips
Bonus, gem strips can add a touch of glam to the soft headband.
Features
-
USB-C Charge Port.
Note: Cable is NOT included. -
3.5 MM AUX INPUT
Compatible with any Bluetooth device.
-
(+) Next Song
Volume Up -
(=) Pause
Play -
Previous Song
Volume Down
BUTTON FUNCTION
POWER ON| PRESS AND HOLD ON/OFF BUTTON FOR 3 SECONDS. ‘BLUETOOTH
MODE”
---|---
POWER OFF| PRESS AND HOLD ON/OFF BUTTON FOR 3 SECONDS. ‘POWER OFF”
LEDON/OFF| PRESS ON/OFF BUTTON TWICE
STANDBY PROMPT| BLUE LIGHT WHEN POWER IS SUFFICIENT. RED LIGHT WHEN LOW.
CHARGING PROMPT| PRESS AND HOLD ON/OFF BUTTON FOR 3 SECONDS
ANSWER/ HANG UP| PRESS ON/OFF BUTTON ONCE TO ANSWER. AGAIN TO HANG
UP.
VOLUME| LONG PRESS VOLUME+ OR VOLUME · BUTTON
STOP/PLAY| PRESS ON/OFF BUTTON ONCE TO PAUSE MUSIC. AGAIN TO CONTINUE.
PREVIOUS/ NEXT| PRESS VOLUME+ OR VOLUME · BUTTON TO PLAY
NEXT OR PREVIOUS SONG
Directions For Safe Use:
Keep out of reach of children. For ages 8 and up. Parental supervision is advised.
- WHEN CHARGING, ONLY USE A USB-C CABLE.
- STORE AND USE AT ROOM TEMPERATURE.
- DO NOT EXPOSE TO WATER OR HUMIDITY.
- DO NOT THROW. AVOID DROPPING.
- DO NOT DISASSEMBLE, REPAIR OR MODIFY.
- DO NOT WIPE WITH CHEMICAL SOLVENT.
- KEEP AWAY FROM FIRE.
PARAMETERS
PRODUCT NAME | CZA HEADPHONE |
---|---|
BLUETOOTH VERSION | JL5.3 |
SUPPORT AGREEMENT | HSP / HFP / A2DP / AVRCP |
IMPEDANCE | (32+15%)0/1 KHz |
DRIVER UNIT | 40MM |
FREQUENCY BAND | 2.4GHz |
FREQUENCY RANGE | 20 HZ~ 20 KHZ |
BATTERY SPEC. | 3.7V /300MAH |
TRANSMISSION RANGE | :S10M |
CHARGING TIME | 1.5 ~ 2.5 HOURS |
CHARGING MODE | USB-C |
CHARGING CURRENT | 300MA |
CONTINUOUS SERVICE | 4~6HOURS |
STANDBY TIME | >2 MONTHS (POWER OFF STATE) |
MAX VOLUME | 105db |
Connection Method
Long press on the on/off button for 3 seconds. You will hear “Bluetooth Mode” and a chime, indicating power is on. Open the Bluetooth setting on your device, find “CZA Headphones” and pair them. If pairing does not work, turn the headphone off and repeat the steps above. Be sure headphone is within range of your device. Low battery will cause connection to end. If you hear a long beep, you need to recharge headphone.
Safety Tested For Children
© 2018 Cra-Z-Art® All Rights Reserved. LaRose Industries, LLC, d/b/a
Cra-Z-Art, Randolph, NJ 07869 USA. Products and colours may vary from those
shown.
At Cra-2-Art• we guarantee our quality. If you are not completely satisfied
with our product, please call 1-800-Cra-Z-Art or visit www.Cra-Z-Art.com. Made
in China. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
Model: 53468
INPUT: 5V 300mA
FCC ID: 2BGHF-S3468
IC: 32462-0524
Made in China
Product Name: BI MUSIC MADNESS HEADPHONES
Model number: 53468
Suppliers Name: LaRose Industries LLC
Suppliers Address: 1578 Sussex Turnpike,Randolph,NJ, 07869 USA
Suppliers Website: www.cra-z-art.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>