TK-PRO Remote Control Wireless Charger User Manual
- July 11, 2024
- Support
Table of Contents
TK-PRO Remote Control Wireless Charger
Product Specifications:
- Remote control frequency : 20-20 kHz
- Model: TK-PRO
- Communication distance : 10 meters
- Battery capacity : 300 mAh
- Charging time : about 1.5 hours
- Charging interface : Type-C
Product Usage Instructions
Phone Installation:
- Place the Phone Holder in a stable position.
- Insert your phone securely in the Phone Holder.
360 Degree Rotatable Phone Stand:
This feature allows you to adjust the phone stand to your desired angle for optimal viewing.
Guides for Set-up:
- iOS devices setup:
- Turn on AssistiveTouch in Settings > Accessibility > Touch for iOS versions above 14.8.
- Power On:
- Long press the 5S Camera button until the red and blue lights flash.
- Pairing:
- Pair the Bluetooth TK-PRO.
Using on Camera/Video:
Follow these instructions for camera and video operations:
- Switch camera mode with a single click.
- Focus on a photo with a single click or long press for 3 seconds.
- Take photos, switch cameras, and more with different button combinations.
Using on TikTok or Other Video Playback Software:
Control video playback with various button clicks and long presses.
Horizontal Screen Switch:
To switch to horizontal screen mode, follow the given steps in the manual for landscape orientation.
Using on E-book:
Scroll through e-books and adjust text with the provided buttons.
FAQ
- Q: How do I know if the remote control is fully charged?
- A: The red light will turn off when the remote control is fully charged.
- Q: What is the communication distance of the remote control?
- A: The communication distance of the remote control is 10 meters.
Packing list
Phone holder function introduction
- Phone Installation
- 360-degree rotatable phone stand
Buttons function introduction
Light status introduction
| NO. | Lighting status | Function |
|---|---|---|
| 1 | Red light is always on | Charging |
| 2 | Light off | Fully charged |
| 3 | Red light flashes | Low battery |
| 4 | Red and blue lights flash alternately | Pairing search status |
| 5 | Blue light flashes once | The remote control is operated once |
| 6 | Red and blue lights flash alternately 3 times | Horizontal screen switch |
Guides for Set-up
Step 1 ：iOS devices must first turn on AssistiveTouch （The iOS system version is higher than 14.8）
Settings>Accessibility>Touch>Turn on AssistiveTouch (Android phones do not have the dots）
Step 2： Long click the 5S “Camera” button to Power On （Red and blue lights flashing）
Step 3 ：Pair the Bluetooth “TK-Pro”（Lights off）
Step 4： Open the software and operate it
Using on Camera/Video
Using on TikTok（Or other video playback software）
How to switch the video to a horizontal screen?
- Turn on the screen lock of the phone
- Flip the phone to the left to landscape mode. Then long press 35 “Up” button to switch to horizontal screen operation mode
- Single click “up” button: play the previous video Single click “down” button: play the next video Single click “OK” button: pause/play
- Flip your phone to portrait mode. Then long press 3s “Up” button to exit the horizontal screen mode
Using on E-book
Two-Step Solution Scrolling Up/Down Too Far
- Click to adjust text
- Turn off continuous scrolling
（ Note ： Only available for Kindle APP not for Kindle devices)
Product parameters
Remote control
Frequency (Hz) : 20-20 khz
Model : TK-PRO
Communication distance : 10 meters
Battery capacity : 300 Mah
Charging time : about 1.5 hours
Charging interface : Type-C
EVATOST CONSULTING LTD
Office 101 32 Threadneedle Street, London, United Kingdom,
EC2R 8AY1,EC2R 8AY1|
contact@evatost.com
SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3,
Fuenlabrada, Madrid, 28947 Spain,28947
successservice2@hotmail.com
Name SELLER HELPER INC.
Add 1312 17th Street # 1298, Denver, CO 80202, United States
Zip Code 80202
Tel 01303-7319873
Company Name : Koby Smutylo
Contact Name: Koby Smutyl
Address: 230 Fourth Ave. Ontario K1S 2L8
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, Including Interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
After-sales email：TKservice001@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>