V-TAC VT-3216 Electronic Insect Killer Instruction Manual

V-TAC VT-3216 Electronic Insect Killer

Specifications

• Model Number: VT-3216
• Power: 16W
• Tubes: 2*8W UV Tubes
• Coverage Area Size: 354×93.5x280mm
• Lamp Life: Up to 80,000 Hours
• Input Power: AC 220-240V, 50/60 Hz

Product Usage Instructions

• Installation:
  • Place the electronic insect killer on a flat, stable surface.
  • Ensure the unit is plugged into a suitable power outlet with the correct voltage.
  • Keep the device away from water sources to avoid electric shock.
• Operation:
  • Turn on the insect killer during peak insect activity times, typically in the evening.
  • Avoid placing the unit near strong light sources that may interfere with attracting insects.
  • Regularly clean the collection tray to maintain efficiency.
• Maintenance:
  • Unplug the device before cleaning or replacing tubes.
  • Use a soft, dry cloth to clean the outer cover and high-voltage grid.
  • Replace UV tubes as recommended to ensure optimal performance.

FAQs

• How often should I clean the collection tray?
  • We recommend cleaning the collection tray at least once a week to prevent clogging and maintain efficiency.
• Can I use this product outdoors?
  • While the product can be used outdoors, it is recommended to place it in a covered area to protect it from the elements.
• What should I do if the UV tubes need replacement?
  • Contact the manufacturer or authorized dealer to purchase and replace the UV tubes following the product manual instructions.

TECHNICAL DATA

DANGEROUS VOLTAGE

WARNING

• The appliance is for indoor use only.
• It is not suitable for use in barns, stables, and similar locations.
• The appliance is not to be used in locations where flammable vapors or explosive dust is likely to exist.
• Only hang or mount the appliance in a place where children can’t reach it. (Above 2.0 m).
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• The lamp is replaceable if the lamp is faulty.
• Please make sure to turn of the power before starting the installation.
• High voltage 2200~2500V. Never touch the high-tension grid when the appliance is working. The appliance should be kept away and out of reach from children.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

OPERATING INSTRUCTION

• Check the local voltage before powering the device. Plug in the appliance under normal input voltage and turn on the switch to the ON side to start the appliance. To shut down the appliance please turn the switch to the OFF side and pull out the plug to cut the power supply. DO NOT intend to touch the internal high voltage grids when the device is powered on due to the risk of electric shock. Never put metal objects inside the grids while the device is powered On/Of.
• Repair should be carried out by the manufacturer or qualified electricians. Never remove any fixed part of the appliance to make any internal adjustment to avoid electric shock. If the supply cord, the lamp, starters, or other part of the appliance is damaged, the manufacturer, its service agent, or a similarly qualified person must replace it to avoid a hazard.
• Unplug the appliance before cleaning. Use a suitable brush to clean the high-voltage metal and throw away accumulated insects on the collection tray every week. Be sure to cut of electricity when cleaning and repairing the machine.
• Make sure that your local voltage and frequency are suitable for the machine. Ensure earthing connection to prevent damage or danger.
• Don’t touch the high-voltage grid by fingers or metal.
• Nonwaterproof, no washing by water, no placing in rain. Not suitable for use in garages, stables, and similar environments. Can be cleaned twice a week with a brush to clean the high voltage.
• Not for use in inflammable and/or explosive locales and similar environments.
• This marking indicates that this product should not be disposed of with other household wastes.
• Caution, risk of electric shock.

INTRODUCTION

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best.

• The insect killer attracts flying insects (flies, moths, mosquitoes, and other pests) via the UV light, and electrocutes them through the electrically charged, high-voltage metal grids. The insect killer is designed with high efficiency and safety, with a non-clogging killing grid and non-rust, cracked, or faded surface.
• The UV (Ultraviolet Rays) light tube is completely harmless to humans and pets.
• The outer mesh protects the user from touching the high-tension grid.
• No chemicals are utilized in this equipment –– no fumes, no smell, no sprays, no mess, and pollution-free. Ideal for indoor use (residences, factories, restaurants, butcher’s storage, hospitals, etc.)
• Please turn off all other light sources in the room for the best performance.

CONTACT

• IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
• FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
• V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
• WEEE Number: 80133970

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>