EMIAH C738-2 Armless Desk Chair No Wheels Instruction Manual

EMIAH C738-2 Armless Desk Chair No Wheels

Important Safety Information

• Check package contents against supplied parts and hardware list to confirm that all parts were received and undamaged.
• Do not use damaged or defective parts. If you require replacement parts, please email customer service.
• Carefully read all instructions before attempting installation. If you have any questions or concerns, please email customer service.
• Only (1) person should sit in the chair at a time.
• Only use the chair on level flooring.
• Children under 5 years of age should not operate the chair alone.
• Do not stand on the chair or use it as a ladder or stair.
• Do not put heavy objects on the chair, or use it as a trolley.
• Keep hands away from the seat lift mechanism during operation.
• Do not use items with sharp edges or hooks near the chair.
• Keep the chair away from flame and heat sources.
• Do not sit on the edge of the chair. Sit correctly in the chair by utilizing the full seat with weight centered over the base.
• To avoid tipping over, do not lift legs up while tilting the backrest or rocking.

Maintenance Tips

Direct sunlight can ruin an office chair over time, degrading most fabrics and materials. Keep your office chair out of direct sunlight.

Humid conditions may lead to the formation of mildew on fabric and/or ruston metal parts. Do not keep your office chair in a damp environment.

Be careful with drinks, food, or any type of liquids when you are near your chair. If a spill happens, clean and attend to stains immediately.Avoid the use of sharp objects or blades near the office chair that may cause damage.

If possible, cover the chair to protect it against dirt and dust. Regularly examine the chair to ensure that all nuts and bolts are correctly fastened, including those connecting the seat, back, and chair mechanics.

Components

1. Foot Core Parts X 1

2. Foot Base X 5

3. Gas Lift X 1

4. Control System X 1

5. Nylon Casters X 5

6. Back Rest X 1

7. Seat Cushion X 1

Accessories

• Bolts: M6x12mm x 10

• Allen Wrench xl

• Bolts: M6x25mm x4

• Bolts: M6x35mm x4

• Washers X 8

Installation Instruction

STEP 1

1. Attach the one of Base Part 2 (2) to Base Part 1 (1) by using 2 pieces Bolts (A) as show, use Allen Wrench (B) to tighten Bolts (A) clockwise as shown.
2. Repeat the same steps for the remaining 4 pieces of Base Part.
   

STEP 2

1. Please put the Base on a carpeted or padded surface.
2. Insert one of Casters (5) into the Base Part 2 (2) by hand as shown.
   

STEP 3

1. Tum over the assembled Base carefully;
2. Insert the Gas Lift (3) as shown.
   

STEP 4

1. Attach the Control Mechanism ( 4) to the Seat (7) by using 4 pieces Bolts (C) as shown, don’t tight Bolts (C) fully.
2. Use Allen Wrench (B) to tighten all Bolts (C) clockwise as shown.
   NOTE:
   Please fix the 2 Bolts (CJ close to the back of the seat first, don’t tighten Bolts (CJ fully. After all 4 Bolts (CJ are attached, use Allen Wrench (BJ to tighten all Bolts (CJ clockwise as shown. Make sure you are using the short (25mmJ Bolts (CJ.
   

STEP 5

1. Fix the Seat (7) and Backrest (6) with 4 Bolts (D) as shown, don’t tight Bolts (D) fully.
2. Use Allen Wrench (B) to tighten all Bolts (D) clockwise as shown.
   NOTE:
   Built-in high-density sponge and silk floss, and to ensure the stability and comfort of the chair, a certain amount of force needs to be squeezed when connecting the backrest and the seat, make sure the holes on the L-shaped part are aligned with the screw holes on the seat. Make sure you are using the long (35mmJ Bolts (DJ.
   

STEP 6

Insert Control Mechanism ( 4) into the Gas Lift (3) as shown. Assemble is complete.

Customer Support

– Unique Design, Extra Comfortable –

EMIAH Furniture I EMIAH-customerservice@outlook.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>