ESSAGER M18 2 in 1 Folding Magnetic Wireless Charger User Manual
- July 8, 2024
- ESSAGER
Table of Contents
M18 2 in 1 Folding Magnetic Wireless Charger
“`html
Specifications
- 2-in-1 Folding Magnetic Wireless Charger
- Input: 9V 2.66A
- Phone output (Magnetic): 15W Max
- TWS output: 5W Max
- Input interface: USB-C
Product Usage Instructions
Using the Charger
-
Place the mobile phone with magnetic suction on the magnetic
suction position for wireless fast charging. -
Connect the wireless charging headset to the headset charging
slot for wireless charging.
How to Solve Abnormal Charging
If you encounter abnormal charging, follow these steps:
- Make sure the charger is connected properly.
- Check for any obstructions on the charging area.
- Ensure the device is compatible with the charger.
FAQ
Q: Why is there heating during wireless charging?
A: During the charging process, there may be a loss of
magnetoelectric conversion leading to heat generation. This is a
normal phenomenon.
“`
(M18
M18 User Manual
Preface:
Dear customers, thank you for purchasing our products. In order to understand
the product further. Please read this manual carefully before use. We wish you
a pleasant experience!
1
2
3
4
5
6
1 Magnetic charging area for Mobile phone 2 Phone or earphone charging area 3 Anti-slip silicone
4 Foldable storage silicone design 5 Anti-slip silicone 6 USB-C interface
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Specifications
2-in-1 Folding Magnetic Wireless Charger Input: 9V 2.66A Phone
output(Magnetic): 15W Max TWS output: 5W Max Input interface: USB-C
Compatible Devices
iPhone 15 Pro Max/15 Pro/15 Plus/15/14 Pro Max/14 Pro/14 Plus/14/ 13 Pro
Max/13 Pro/13/13 mini/12 Pro Max/12 Pro/12/12 mini (and other magnetic phone
wireless chargers) AirPods Pro 2nd Generation/AirPods 3/AirPods Pro/AirPods
2nd Generation (right) without magnetic suction Samsung Galaxy Z Fold5/Z
Flip5/S23 FE/S23 Ultra/S23+/S23/S22 Ultra/S22+/ S22/S21 FE/S21
Ultra/S21/S21+/S20 FE/S20/S20+/S20 Ultra/S10E/S10/S10+/
S9/S9+/S8/S8+/S7/S7+/S7 Edge/S7 Active/S6/6 Edge+/S6 Active/Z Flip4/ Z Flip3/Z
Flip/Z Fold4/Z Fold3/Z Fold2/ Note 20 Ultra/Note 20/Note10 (5G)/ Note10+
(5G)/Note9/Note 8/Note7/Note 6/Note 5 (Folding screen) (For the best charging
experience, please use QC3.0/24W power adapter or a larger power adapter)
(right) without magnetic suction
Using instructions
Place the mobile phone with magnetic suction on the magnetic suction position
for wireless fast charger. Connect the wireless charging headset to the
headset charging slot for wireless charger.
How to solve abnormal charging:
Please confirm whether your mobile phone has wireless charging function before
use; “Check whether the phone deviates from the wireless inductive charging
area of the charger; `Whether a non-metallic protective case is used for
charging mobile phones, and the thickness of the protective case is
recommended not to exceed 4mm; When metal objects touch the charging area, the
charger will automatically identify and provide power off protection. When the
temperature of the charger is too high, it will automatically start the
protection.Please unplug the power supply first and use it after the charger
recovers the temperature.
Q&A:
Q:Why is there heating in the charging of wireless charging inductive
products? A:During the charging process, there will be a certain loss of
magnetoelectric conversion, which will be converted into heat, causing the
mobile phone and charger to generate heat, which is a normal phenomenon.
Safety Notes
Use indoor or under dry environment, avoid placing or using in the environment
of high temperature, humidity, strong static electricity and strong magnetic
field; For your safety, please do not use wet hand plug and unplug electrical
appliances; Avoid putting it in a place easily accessible to infants and
children; Do not use the product if it is contaminated with water or dirt;
Non-professional personnel are not allowed to open and repair without
authorization.
Suggestions:
When the device is fully charged, disconnect it from chargingtime to avoid a
long cycle of charging, which may lead to continuousheating of the device and
charger; lt is recommended to stop running the background software
whencharging the phone. If your iPhone is not charging, it may be a version
issue. Please upgrade your phone to the latest system, or restart your phone
to resolve the issue. If the device does not charge your watch, please check
if your watch is up to date, if not, please upgrade to the latest system to
solve the problem. Please charge after the temperature cools. Our chargers
have temperature control to ensure your device is safe while charging.
Tip: It is recommended not to expose the charger to environments higher than
40°C to avoid affecting its lifespan.
A01 A02 A03 A04
2023.1.6 2024.2.27 2024.6.14 2024.7.1
128 7090mm
(RoHS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>