virtufit VF06082 Supboard Surfer Stand Up Paddle User Manual

virtufit VF06082 Supboard Surfer Stand Up Paddle

Product Information

Specifications:

• Brand: VirtuFit
• Model: Supboard Surfer 305
• Available Variants: VF06082, VF06087, VF06088
• Material: High-pressure double-wall drop stitch
• Max Pressure: 1 Bar or 15 psi
• Features: Non-Slip EVA foam, D-rings for cargo leash, Elastic rope, Fins for tracking, Carrying handle

Product Usage Instructions

Safety Instructions:
Consult your doctor before starting to exercise, especially if you have health problems. Read all instructions carefully before using the equipment. VirtuFit is not responsible for any injury or property damage resulting from improper use.

Guarantee:
The warranty period is 2 years from the date of purchase. The warranty is valid for normal recreational use only and does not cover rental use.

Assembly Instructions:
Check for missing parts in the packaging. Some parts may already be attached to the item. Follow the assembly instructions carefully.

Inflation:
Make sure the valve cap is properly tightened to ensure a complete seal. Use a double-action pump for inflation.

Storage:
Store the cupboard in a dry and clean room. Ensure the board is completely dry before storage and remove any sand or gravel that can cause wear or leakage.

Paddle Position:
The paddle can be extended for proper positioning. Adjust it according to your height and preference.

Repairing a Leak:
Perform repairs in a well-ventilated area. Avoid inhaling toxic fumes or skin contact with repair materials. Ensure the edges of the repair patch are well compressed for a proper seal.

FAQ:

• Q: How do I attach the fins to the cupboard?
  A: Lay the cupboard flat on the ground and attach the fins securely to the designated slots on the board.

• Q: What should I do if I find missing parts during assembly?
  A: Check the packaging thoroughly for any missing parts. If necessary parts are missing, contact customer support for assistance.

• Q: Can the paddle be adjusted for different heights?
  A: Yes, the paddle can be extended or shortened to accommodate different user heights.

PACKAGE CONTENT

WARNINGS

SAFETY INSTRUCTIONS

WARNING!
Consult your doctor before starting to exercise. This is especially important for people with health problems. Read all instructions before using the machine. VirtuFit assumes no responsibility for injury or property damage resulting from the use of this equipment. Please read this manual carefully before assembling and/or using the machine.

• Wear a life jacket.
• Use by minors (under 14 years) under adult supervision.
• Check the air pressure before use.
• Do not use a high-pressure pump, as this may cause cracks.
• Do not fill the item beyond what is indicated in the manual.
• Do not inflate with hot air.
• Do not use the item in rapids and large waves.
• Do not use the product in water from the shore.
• Make sure you are no more than 150 m from the water’s edge.
• Do not use the product in strong winds or out of sight of the shore.
• Make sure you keep your balance when using the product.
• The maximum user weight is 180 kg.
• Never go further than 300 meters from a mooring or shore.
• This SUP board is suitable for use in fresh and salt water.
• Use all included accessories.
• Read the manual before use.
• Use all included accessories.
• Read the manual before use.

GUARANTEE

The warranty period for this product is 2 years from the date of purchase. The warranty is only valid when this item is used for normal recreational use and activities and does not cover items used for rental.

Warranty claims are excluded if the cause of the defect is due to:

• If an item or part is found to be defective by VirtuFit, the warranty covers the repair or replacement of the defective item or part only. VirtuFit is not responsible for any costs, losses or damages incurred as a result of the loss or use of this product.
• This warranty does not cover damage caused by misuse, abuse, neglect, normal wear and tear, damage caused by excessive heat exposure, damage caused by improper handling and storage, damage caused by use in waves or breakage on shore, defective cupboards caused by falls or accidents in surfing conditions, and damage caused by anything other than defects in material and workmanship.
• This item must not be modified and/or fitted with a motor. –
• This item must not be used more than the maximum recommended weight for the user.
• This warranty is void if any unauthorized repair, alteration, or modification has been made to any part of the cupboard.
• The warranty for repaired or replacement parts is valid from the date of original purchase.
• In case of improper use, negligence, and/or lack of maintenance.
• Failure to maintain the item by the manufacturer’s instructions.

ASSEMBLY INSTRUCTIONS

Missing parts: If any parts are missing from the packaging, please check the packaging and the item carefully. Some parts are already attached to the item.

Inflation

• Unscrew the valve cap.
• Press the knob and turn it about 90 degrees so that it is in the “OUT” position.
• Place the air pump nozzle on the valve and inflate until you reach the required pressure (maximum 1 bar/15 PSI).
• After inflation, tighten the valve cap (clockwise). Make sure that the valve cap is properly tightened, otherwise the valve will not be completely sealed.

CAUTION!

• The maximum pressure allowed is 1 bar (15 PSI).
• The cupboard is only completely sealed if the valve cap is properly tightened.

Attach the fin
Lay the cupboard flat on the ground and attach the fins to the cupboard.

STORAGE

CAUTION! Store the cupboard in a dry and clean room. Make sure that the board is completely dry before storing it and that no sand or gravel remains on the board or between the cracks. This can cause wear and tear or even leakage of the cupboard during storage.

• Unscrew the valve cap and deflate the cupboard.
• Clean and check the cupboard and all accessories.
• When the cupboard is empty, roll it up from the other end until all the air is out.
• Make sure the board is completely dry before storing it.

PADDLE POSITION
NOTE! The paddle can be extended

REPAIRING A LEAK

NOTE! Perform all repairs in a well-ventilated area. Avoid inhalation of toxic fumes and contact with skin or eyes. Keep all repair materials out of reach of children.

• Lay the cupboard flat on the ground and check if the board has completely deflated.
• Prepare a round repair patch with a diameter of at least 7 centimetres.
• Clean the repair patch and the area around the leak with alcohol.
• Tape the area around the leak with masking tape to catch the excess adhesive.
• Apply 3 thin, even coats of repair adhesive to the leak area and the repair patch. Wait 5 minutes between each coat.
• After the third coat, wait 10 to 15 minutes before applying the repair adhesive.
• Use a hand roller to apply the repair adhesive evenly.
• Wait 24 hours before inflating the cupboard.

NOTE! Make sure that the edges of the repair patch are well compressed so that the leak is properly sealed.

SERVICE
Do you have a problem with your VirtuFit fitness equipment and would you like to submit a service request? Then scan the QR code on the right and fill in our service form.

VIRTUFIT
Twekkelerweg 263
7553 LZ Hengelo
The Netherlands
info@virtufit.nl

@virtufit_fitness
VirtuFit
www.virtufit.com

References

• VirtuFit | Fitness at home | A solution for every fitness goal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>