V-TAC VT-702CL Canless Fire Rated Gu10 Fitting Instruction Manual
- July 8, 2024
- V TAC
Table of Contents
V-TAC VT-702CL Canless Fire Rated Gu10 Fitting
TECHNICAL DATA
DIMENSION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn of the power before starting the installation.
- Installation must be performed by a qualified person.
- For Indoor Purpose Only
Disposal
This marking indicates that this product should not be disposed of with other household wastes.
Warning
Caution, risk of electric shock.
INSTALLATION INSTRUCTIONS
- Switch off the power.
- Cut a hole as per the cut-out (75mm) using a proper tool. (Pic 2).
- Make electrical connection to the terminal block/quick connector. (Pic 3).
- Remove the bezel (twist anti-clockwise). Install the bulb into the bulb holder and put the bezel back (twist clockwise). (Pic 4).
- Holding the spring clips upwards and with the fixture hanging down through the middle, offer the fitting into the hole and allow the springs to pull the fitting in the ceiling. (Pic 5,6).
- Switch on the power and test if the light is working properly.
