V-TAC VT-6163 LED Diamond Borderline Panel Instruction Manual
- July 6, 2024
- V TAC
Table of Contents
V-TAC VT-6163 LED Diamond Borderline Panel
WARRANTY
TECHNICAL DATA
| MODEL | VT-6163 |
|---|---|
| SKU | 23665, 23666 |
| SHAPE | SQUARE |
| WATTS | 60W |
| LUMENS | 6000 Lm Useful Lumen |
| BEAM ANGLE | 110° |
| CRI | >80 |
| DF | >0.9 |
| LIFE SPAN | 30,000 Hours |
| ON/OFF CYCLE | >15,000 |
| OPERATING TEMPERATURE | -20°C to +40°C |
| INPUT POWER | DC: 33-40V |
| IP RATING | IP20 |
| BODY TYPE | Aluminium + PC |
| DIMENSION | 595x595x15mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, Risk of electric shock
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- the external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- For Indoor use only.
Note: The panel works on DC 33-40V, please connect correctly with the
conductor before connecting the conductor to the power supply main.
(2 Drivers and 2 Quick Connectors are included)
Non-replaceable light source
Replaceable control gear by a professional
Luminaires not suitable for covering with thermally insulating material.
INSTALLATION INSTRUCTION
-
Make a hole into ceiling
-
Fix the panel into ceiling.
-
Wire the DC cable of the panel to the driver (Included 2 Drivers) and then wire the AC source cable to the power supply.
-
Turn on the switch, test the fixture light on.
DISMANTLING INSTRUCTIONS
(For Market surveillance team only)
Note: Light source removal will void the warranty
Customer Support
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT SUPPORT@VTACEXPORTS.COM V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>