ZOEF ROBOT RB125TWZ Robot Window Cleaner User Manual

ZOEF ROBOT RB125TWZ Robot Window Cleaner

Specifications :

• Product Name: Bobbie 2.0 met boreal
• Nominal Voltage: DC 24V
• Nominal Power: Approximately 72W
• Battery Capacity: 650mAh
• Sound Level: Approximately 63dB
• Charging Time: Approximately 2 hours
• Dimensions: 240x223x73mm
• Packaging Dimensions: 340x255x90mm
• Input Current of Power Adapter: AC 100-240V 50/60Hz 2.0A
• Output Current of Power Adapter: DC 24V/3A

Product Usage Instructions

1. Important Safety Precautions and Warnings :
   Before using the product, read and follow all safety instructions provided.

2. Product Description
   The package includes the robot, adapter, AC cable, dust cloth, safety line, remote control, water storage bottle, and user manual.

3. Technical Parameters:
   The product operates at a nominal voltage of DC 24V with a power output of approximately 72W. It has a battery capacity of 650mAh and produces a sound level of around 63dB. The charging time is about 2 hours, and the dimensions are 240x223x73mm.

Installation Instructions:

1.  Connecting the Safety Line:

   • Check the safety line in the lower left corner of the robot, ensuring the knot is secure and the line and fastener are undamaged.
   •  Attach the fastener at the other end of the safety line to a sturdy object in the room, ensuring it is wrapped multiple times to prevent detachment.

2.  Installing the Cleaning Cloth:
   Ensure the cloth belt is clean before installation.

3. Filling the Water Tank:

   • A. Fill the provided bottle with distilled water, place it on the water inlet of the product’s tank, squeeze the water storage bottle, and pour water into the tank.
   • After filling the tank, cover it with a rubber stopper to ensure a seal.

4.  Connecting the Product and Power Adapter:

   • A. Connect the AC power cable to the adapter.
   • B. Insert the adapter output L-plug into the device’s socket and secure it with the outer ring of the nut.

FAQ :

• Q: What should I do if the product shows a red blinking light?
  A: A red blinking light indicates a low battery. Please connect the adapter for charging and usage.

Bobbie 2.0 met borstel RB125TWZ

GEBRUIKSAANWIJZING
USER MANUAL

1. Important safety precautions and warnings

1. Before using this product, please read the manual carefully 1. If you are using this product for the first time or haven’t used it for a long time, please Tully charge the built-in backup battery until the green light is/on (it is recommended to charge for 2 hours for the first time)
2. Before use, fasten the safety rope and check if there is any damage to the safety rope and if the knot is secure, ensuring that the safety rope is tied to a stable indoor device.
3. This product must be connected to a power cord in order to work.
4. Before wiping the glass, please remove all items from the surface of the glass. Do not clean broken glass, also some frosted glass may be scratched during cleaning. Please use with caution.
5. When working on the product, please keep hair, loose clothing, fingers and other parts of the body at a certain distance from the moving arts of the product.
6. Please turn on the power first and then place the product on the glass to ensure that the machine is securely attached to the surface of the glass before letting go; Remove the product before turning off the power.
7. Ambient Temperature: 0°C-40°C (32 F-104°F)
8. Product storage temperature: -10%C-50 °C (14°F-122°F)

warning

1. 1. Do not allow children to use this product, let alone use it as a toy.
   2. Do not use in rainy, humid, water or other liquid environments to avoid water ingress that may cause machine malfunction or electric shock hazards. running, swimming pools, etc.
   3. Do not use in hazardous areas such as open flames, restrooms with nozzles
   4. Do not use in areas with flammable, explosive solids, and gases.
   5. Do not place this product in strong magnetic environments.
   6. Do not clean damaged or uneven glass. Uneven or damaged glass will not generate sufficient vacuum suction to adsorb, resulting in the product not working
   7. Please/do not expose this product to sunlight and keep it away from heat sources such as radiators, heaters, microwaves, gas stoves, etc.
   8. Do not wet this product or place it in a humid environment for a long time. Please keep the product away from liquids (beer, water, beverages, etc.).
   9. Do not use water to clean the body and power adapter.
   10. Do not spray water or cleaning solution on the body or bottom of the machine. Water can only be sprayed on the cleaning cloth, and then attach the cleaning cloth

2. 11. Do not repair the product on your own. Product repairs must be carried out by an authorized after-sales center or dealer.
   12 If the product or power adapter is damaged, please do not continue to use it and contact your local after-sales center or dealer for repair.

Product Safety Information

1. 1. Before cleaning the body or maintaining the machine, make sure to cut off the power supply, unplug the transformer from the socket, and turn off the product power. Remember not to tum off the power by unscrewing the extension wire.
   2. Do not drag the power adapter or plug through the extension cable. If the power is cut off, the power plug should be unplugged normally.
   3. Please use the original power adapter. Using a non original adapter may cause product malfunction or damage.
   4. Do not damage or twist the power cord. Do not press heavy objects on the power cord or adapter to avoid damage to the power cord, short circuit, fire, electric shock, etc.
   5. Ensure that the adapter has sufficient space for ventilation and heat dissipation during use, and do not wrap the adapter with other objects, as it will increase the risk of heating.
   6. Do not use damaged adapters, charging cables or plugs; Do not use the adapter in damp environments and prevent wet hands from touching the adapter .
   7. Before powering on the power adapter, please carefully read the voltage label on the power adapter.
   8. Do not disassemble the adapter. If the adapter fails, please replace the entire adapter. For assistance and repair, please contact local customer service or dealer.
   9. If the battery of this product is not handled properly, there may be a risk of burning or chemical damage to the body. Please do not disassemble the battery to avoid causing a short circuit, and do not throw the battery into a fire or place it in a temperature above 60 C (140 F). Do not incinerate this product.
   10. The built-in battery of this product can only be replaced by the manufacturer or designated dealer/after-sales center to avoid danger. The disposal and recycling of waste batteries must comply with relevant national laws and regulations. 11. Strictly follow the instructions for opera-ting this product, and the manufacturer will not be responsible for any property damage or personal injury caused by improper use.

 Product description

Packing List

Technical Parameter

Product name

| Bobbie 2.0 with brush| Rated voltage| DC: 24V
---|---|---|---
Rated power| About 72W| Noise| About 63dB
Battery capacity| 650mAh| Charging time| About 2h
Dimensions| ****

240x223x73mm

| Package Dimensions| ****

340x255x90mm

Power adapter input| AC 100-240V 50/60Hz 2.0A| Power adapter output| DC 24V/3A

 Product diagram

Attention :
When using this product, it is necessary to connect the power adapter and the indicator light should be green before starting and working.

Green light flashing| Machine is normal or charging|
---|---|---
Green light always on| Battery full|
Yellow light flashing| Low battery| Please charge in a timely manner
Red light always on| Low battery| Please connect the adapter for charging and use
Flashing red light| Fault abnormality| Please check the machine or restart it

Installation instructions

Connecting the safety rope

• A. It is required to check the safety rope in the lower left comer of the machine, ensure that the knot is stable, and check whether the safety rope and hardware buckle are damaged. (Figure 1)
• B. Secure the hardware buckle on the other end of the safety rope to other sturdy objects inside the room, ensuring that it is wrapped several times to prevent it from falling off. (Figure 2)

Install the wiping cloth

• Properly apply the cloth to the bottom of the product body, paying attention to the direction, ensuring that it is not installed upside down, and not blocking the drive wheel and barometer sensor. (Figure 3)
• It is required to press the cloth in all directions with your hand. The cloth must be tightly attached to the Velcro on the body, and the four corners of the cloth must be flattened. The cloth must be installed in the machine slot, kept flat, and the cloth must not be too wet.
• Check if the belt is clean.

Water tank filling

• A. Fill the randomly provided water storage bottle with tap water, align it with the water inlet of the product’s water storage tank, squeeze the water storage bottle, and pour the water into the tank. (Figure 4)
• (Note: It is recommended that users fill one bottle at a time and try not to let the water overflow)
• After filling the water tank with water, cover it with a rubber stopper to ensure sealing.

Connect the product and power adapter

• Connect the AC power cord to the adapter.
• Connect the adapter output end “L” plug, Insert into the DC power interface of the body and tighten it Outer ring hardware nut 2 ②
• Insert the AC power cord plug into the socket ③
• After connecting the machine, check the indicator light on the front of the power adapter. The normal state is green. ④
• Finally, check the Pilot Lamp of the machine’s “on/off button”, and the normal state is flashing green light ⑤
• Important Note : Please ensure that the machine is continuously powered by AC power while working. The built-in backup battery is prepared to ensure that the machine will not fall off due to sudden power outage during operation, and the duration of the built-in battery is about 20 minutes. If the built-in battery is low, please fully charge the battery before working.

Operation

1. 4.1 On/Off

   • Power switch – Press and hold the button  on the machine for 3 seconds to turn on/off the machine’s power supply, After ensuring that the machine fan rotates, place the machine on the glass and ensure that it has been adsorbed onto the glass before releasing.
   • When placing the machine, it is required to be at least 8cm away from the frame.
   • At the beginning, it is required to place the machine flat (with the body facing up and the bottom facing down) or on its side (with the bottom facing the side glass), and long press” ” to start the machine normally.

2.  Starting the robot

   • Press and hold the  button on the surface shell for 3 seconds to enter the boot state.
   • Place the machine on the surface of the glass to be cleaned, and briefly press the” ” button again to start the machine and enter the automatic cleaning mode.

3. Stop/Pause

   • When the machine is cleaning, short press the ”  button  on the machine or the  button on the remote control  to stop cleaning.

4. Removing the machine

   • After the machine cleaning is completed and automatically stops, press and hold the power button to turn off the machine, and firmly grasp the handle to remove the machine
   • If you cannot reach the machine with your hands, you can use the remote control to control the machine. After walking to a position where your hands can reach the frame, remove the machine.

5. Remote Control
   Adopting 2.4G wireless technology, it can operate 360 degrees in all directions and at a distance of 8 meters without obstruction.

6. Introduction to Water Spray Operation
   This machine supports separate water spraying on the left and right sides during operation; The rolling brush end is driven by a dual nozzle motor, and the other end is driven by a single nozzle atomizer.

   • Before starting work, use the water storage bottle in the accessories and add appropriate tap water to the water tank.
   •  Every time the machine is turned on, it operates normally and the water spray function is turned on by default; Users can turn off/on the water spray function themselves
   •  No matter which direction the machine moves forward, it can spray water and the rear water tank will automatically close.
   • Water source: The water tank is suitable for tap water.
   • The water tank has a capacity of 30ml.
   • The delivered water storage bottle has a capacity of 35ml.

Product Maintenance

1. Cleaning cloth
   Please flip the machine body flat and remove the wiping cloth. Place the cloth in cold water, add a small amount of detergent for cleaning, clean with water, and then air dry. Figure ①
   (Remember. Do not use bleach; do not dry, do not dry clean. Do not use a completely wet cloth to clean glass windows, as this may cause the machine to become stuck and slippery on the glass surface due to excessive moisture adsorption.)

2. Fan maintenance
   Please turn the machine body over and lay it flat, and use a clean and dry cloth to wipe away dust and other dirt from the bottom of the body. Figure ②

3. Rolling brush maintenance
   After each cleaning of the machine, remove the rolling brush cloth on both sides, clean the surface cloth with tap water (do not flush water into the inside of the rolling brush), and finally air dry the rolling brush cloth
   Disassembly method:

   • Place the machine flat on the table and use a cross screwdriver to unscrew the screws counterclockwise.
   • Gently break open the nearby buckle with your hand to remove it, and separate the roller brush and buckle separately.
   • Install the clean roller brush onto the buckle, and connect the other end of the roller brush with the machine bearing through 6 holes. Gently push it inward and then swing the buckle to fix it in the machine slot. It is best to tighten the screws.
   • The disassembly/assembly method for both roller brushes is the same.

4. Automatic cleaning belt maintenance

   • It is recommended that users clean and maintain the belt every time they use the window cleaner (before/after work) to prevent stains, dust, etc. from sticking to the surface of the belt, which may cause abnormal machine operation.
     Step:

   • Connect the machine to the power adapter

   • Place the machine in the opposite direction (with the belt facing upwards) on the workbench.

   • Then press and hold the “key” button by hand, and the wheel belts on both sides rotate in a circular motion.

   • Use a clean towel and cloth to gently adhere to the surface of the belt. Figure .④After cleaning the belt, press and hold the power button to shut down the machine.

   • Attention:

   • When users use clean towels and cleaning cloths, they must be careful when slightly adhering to the surface of the belt. Due to the rotation of the wheel belt, they cannot use strong pressure to compress the belt to prevent the cloth from being drawn into the wheel together.

Scan the QR code on the right, download and install the “Zoef Robot Smart” app. Or search for “Zoef Robot Smart” in the App Store or Android Google Play Store. Download and install this app. Make sure that ONLY the 2.4 GHz network is used on your mobile phone.

Zoef Robot Smart APP

Connect automatically

1. Open the “Zoef Robot Smart” app and register a new account or use an existing account.

2. Once logged in, click on the plus icon and press ‘add device’ (Ensure that the robot is on and the LED is blinking. Make sure that the WiFi and Bluetooth on your
   x phone are enabled.)

3. The robot will appear in the App, and you can add the device.

4. Click on add and enter your WiFi name and password to complete the connection.

Manual Connection

1. To manually connect, add the device by clicking on the robot window washers.
2. Insert the connector cable into the robot to turn it on.
3. Check if the LED on the robot is
4. Confirm that the indicator on the robot is blinking rapidly, then click ‘next’.
5. The App will search for the robot, enter your network and password, and continue.
6. The robot will connect and complete. You can proceed to use the App.

 Troubleshooting

• Replace the sponge cloth equipped on the machine
• Wipe the water on the belt dry with a dry cloth

The machine does not move smoothly| The glass surface is too damp or sticky| Use the remote control to manually wipe the glass in all directions (up/down/left/right) before proceeding with further operations
Red light always on| Low battery level| Please charge the machine and it can function normally after being fully charged
**** Flashing red light| According to voice prompts|

• Please restart the machine
• Check if the machine cloth is installed correctly
• Please check if the power adapter connection is powered off

The machine cannot be started or does not follow the preset rules during operation| Barometer detects insufficient vacuum|

• Check if the cloth is installed correctly
• Replace with a brand new cloth.

The machine cannot be started or does not follow the preset rules during operation| The corner or border adhesive strip is not smooth| When the machine is moving, it causes rapid air leakage for safety reasons; Stop cleaning, place the machine back in a safe area and then clean again
When the machine suddenly stops working, please connect to an external power source| **** Power adapter power down| Check if the power adapter is powered off or if there is poor contact at the machine power input interface/extension cable connection (re plug the DC plug by hand)
After placing the machine for a period of time, it was found that it did not start up| The built-in battery is out of charge| It is required to charge the machine first, and the normal charging time is generally around 2 hours

Please be sure to follow the instructions and warnings related to the system.

Warranty Description

Thank you for purchasing and using this product! In order to protect your rights and interests, this product implements after-sales service on the basis of the national regulations (Regulations on the Responsibility for Repair, Replacement, and Return of Goods) (commonly known as “Three Guarantees”). In order to satisfy you with our service, please carefully read and understand the relevant content about the three guarantee card.
If your glass cleaning robot is found to have defects due to material, manufacturing, and functional issues during the purchase or warranty period, it can be repaired or replaced free of charge by the original purchasing merchant or local distributor.

 Non warranty coverage

1. Normal wear and tear (such as cleaning cloth, safety rope, etc.).
2. Reduced battery discharge due to battery life (2 years) or usage
3. Accidental falls, malfunctions, etc. caused by improper use, negligence, or failure to follow instructions.
4. Use this product for purposes other than general home and office use.
5. Consumers can open the bottom sticker of the product themselves.
6. Incorrect installation due to use of non original accessories or components.
7. Human factors causing product defects (such as operational errors, handling damage, improper input voltage, etc.).

Kind reminder

1. If the machine still cannot function properly after following the instructions, please contact our company’s after-sales service department for assistance.
2. Please strictly follow this product manual and keep it for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>