FISHER AND PAYKEL CP-366 36 Inch Pro Style Gas Rangetop Instruction Manual
- July 5, 2024
- FISHER and PAYKEL
Table of Contents
- FISHER AND PAYKEL CP-366 36 Inch Pro Style Gas Rangetop
- Product Information
- Product Usage Instructions
- Parts List Key
- SEALED BURNER COMPONENTS
- SEALED BURNER COMPONENTS
- BURNER HANGER COMPONENTS
- BURNER HANGER COMPONENTS
- MANIFOLD COMPONENTS
- MANIFOLD COMPONENTS
- VALVE PANEL COMPONENTS
- VALVE PANEL COMPONENTS
- STRUCTURE COMPONENTS
- STRUCTURE COMPONENTS
- Frequently Asked Questions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FISHER AND PAYKEL CP-366 36 Inch Pro Style Gas Rangetop
Product Information
Specifications
- Brand: Fisher & Paykel
- Voltage: 110V, 60Hz
- Model: CP-366
- Product Code: 70770
Product Usage Instructions
Sealed Burner Components
These components are essential for the operation of the sealed burner.
-
* **Part 210608 – D BURNER CAP** :Description -Helps in distributing the flame evenly.
Burner Hanger Components:
These components support the burner and ensure proper positioning.
-
* **Part 211146 – FOOT GRATE** : Description –Provides a stable base for the burner.
Manifold Components:
Key components that manage the gas flow and ignition system.
-
* **Part 211860 – CORD SET POWER SUPPLY**Description – Supplies power to the ignition system.
GUIDE TO USING THIS MANUAL
The model covered by this manual is listed on the front cover. The information
detailed in this manual is subject to change without notice. The latest
version is indicated by the reprint date and replaces any earlier editions.
The front cover picture shows the type of product and may not necessarily be
an exact image of the model covered by the manual.
Kit Parts
The components shown in italics with a part number are those parts in the kit
that are available also as separate items. In addition, some parts may be
supplied with this kit that are not available as separate items and are
therefore either not listed or a part number is not shown against the part
description in this manual.
Parts List Key
NOT USED| As a part, indicates the diagram part reference is not used in this
manual.
---|---
italics| Kit components or parts included are shown in italics , refer
to the above notes: Kit Parts
NI| As a part reference, indicates the part is not illustrated on the diagram.
SEALED BURNER COMPONENTS
SEALED BURNER COMPONENTS
| REF | PART | DESCRIPTION |
|---|---|---|
| 1 | 210608 | D BURNER CAP |
| 210609 | C BURNER CAP | |
| 2 | 237631 | RING, D-PORT ASSY |
| 237629 | RING, C-PORT ASSY | |
| 3 | 211526 | NUT W/CHAMFER |
| 4 | 210636 | D SIMMER RING |
| 210635 | C SIMMER RING | |
| 5 | 210913 | VENTURI W/CHAMFER |
| 6 | 220449 | D BURNER BASE W/CHAMFER |
| 220445 | C-BURNER BASE, ELECTRODE | |
| 7 | 216694 | VOLCANO PORC. |
| 238177 | VOLCANO EI C BURNER, PORC | |
| 8 | 217994 | KIT IGNITOR, SPRING AND CLIP |
BURNER HANGER COMPONENTS
BURNER HANGER COMPONENTS
| REF | PART | DESCRIPTION |
|---|---|---|
| 1 | 211146 | FOOT GRATE |
| 2 | 216877 | TUBING SIMMER REAR RDS36/48 |
| 3 | 216875 | TUBING SIMMER FRONT RDS36/48 |
| 4 | 216874 | TUBING MAIN FRONT RDS36/48 |
| 5 | 210538 | JET HOLDER MAIN D 16K NAT |
| 220443 | JET HOLDER MAIN 15K LP S/F BNR | |
| 6 | 216876 | TUBING MAIN REAR RDS36/48 |
| 7 | 210588 | JET HOLDER SIMMER NAT |
| 210589 | JET HOLDER SIMMER D LP | |
| 8 | 210535 | JET HOLDERS C 12K |
| 210542 | JET HOLDER MAIN 12K LP SINGLE | |
| 9 | 232626 | BURNER HANGER RDS36/48 |
| 10 | 211526 | NUT W/CHAMFER |
| 11 | 211502 | NUT SIMMER JET HOLDER |
| 12 | 210600 | GRATE SIDES RDS36/48 |
| 13 | 210613 | GRATE CENTER RDS36/48 |
| 14 | 211238 | SM 10 X 1/2 SL TD HWH SMS, ZIN |
| 15 | 232632 | SUPPORT BURNER HANGER |
MANIFOLD COMPONENTS
MANIFOLD COMPONENTS
| REF | PART | DESCRIPTION |
|---|---|---|
| 1 | 211860 | CORD SET POWER SUPPLY RGS/CS |
| 2 | 238382 | TRANSFORMER, 120/230V, 30ma |
| 3 | 211540 | TERMINAL BLOCK |
| 4 | 211813 | SPARK MODULE 6 PT |
| 5 | 237833 | FRONT BAFFLE 366 |
| 6 | 238756 | MANIFOLD 36″, W/A |
| 7 | 210896 | VALVE DUAL FLOW 6 OC |
| 210897 | VALVE DUAL FLOW D | |
| 8 | 211342 | HEX HD BOLT 10-32 X 1 FULL ZN |
| 9 | 210506 | CLAMP VALVE |
| 10 | 211804 | SWITCH IGNITOR |
| 11 | 210508 | C-CLIP VALVE STEM |
| 12 | 212164 | ELBOW 1/2 – 1/2 FEMALE |
| 13 | 221766 | PIPE 1/2 NPT X 20.00 L |
| 14 | 210663 | REGULATOR LP/NG |
| 15 | 212132 | NIPPLE- 1/2 NOT X 4 |
| 16 | 238271 | BRACKET, RECEPTACLE |
| 17 | 211270 | MS 6-32 X 1/2 PH PN HD ZN |
| 18 | 211396 | NUT HEX 6-32 KEPS ZN |
| 19 | 211323 | HEX BLT 1/4-20X 1/2 FULL THE SS |
| NI | 238457 | 6-BURNER HARNESS RGT / RDT-366 |
| NI | 239057 | IGNITER WIRES 6-BURNER RGT366 |
VALVE PANEL COMPONENTS
VALVE PANEL COMPONENTS
| REF | PART | DESCRIPTION |
|---|---|---|
| 1 | 238520 | PANEL, ETCHED VALVE, CP-366 |
| 2 | 211419 | LOGO – CLIP |
| 3 | 237567 | BADGE, 2.42″ |
| 4 | 211300 | SCREW 8-32 X 1 TORX FL HD |
| 5 | 237578 | LENS, BEZEL |
| 6 | 240538 | KNOB-SKIRT ASSY (TOP BURNERS) |
| 7 | 237577 | BEZEL |
| 8 | 238282 | MOD LIGHT PILOT 120/240V BLUE |
| 9 | 238283 | CLIP LIGHT PILOT DCS |
STRUCTURE COMPONENTS
STRUCTURE COMPONENTS
| REF | PART | DESCRIPTION |
|---|---|---|
| 1 | 239320 | TRIM BACK CP-36 LONG |
| 2 | 239319 | LEADING LEDGE CP-36 SHORT |
| 3 | 238295 | COOKTOP, INNER SS RD/RG/CS 366 |
| 4 | 211410 | NUT W/RET 8-32 |
| 5 | 231114 | INSULATION BACK C36 |
| 6 | 237601 | BURNER BOX W/A 36 |
| 7 | 216413 | INSULATION SIDE |
| 8 | 232166 | SIDE INSUL RET CS36 R/H |
| 9 | 237830 | HANDLE DRIP PAN RGT / RDT 366 |
| 10 | 231116 | INSULATION BASE C36 |
| 11 | 238871 | RETAINER, BOTTOM, INS, CP-36 |
| 12 | 232225 | BRACKET PIPE HOLD |
| 13 | 232167 | SIDE INSUL RET CS36 L/H |
| 14 | 216413 | INSULATION SIDE |
| 15 | 238872 | RETAINER, BACK, INS., CP-366 |
| 16 | 211238 | SM 10 X 1/2 SL TD HWH SMS, ZIN |
| 17 | 237739 | SIDE, BURNER BOX 36 & 48 LEFT |
| 18 | 211596 | EDGE LINER BLACK |
| 19 | 239311 | INSERT, TRIM BACK CP-36 |
| 20 | 210995 | GROMMET – ADJUSTABLE |
WIRING DIAGRAM
WIRING SCHEMATIC
Frequently Asked Questions
Q: How often should I clean the sealed burner components?
A: It is recommended to clean the sealed burner components every month to
ensure optimal performance.
Q: Can I use LP gas instead of natural gas with this product?
A: Yes, the product is compatible with both LP and natural gas. Ensure to
use the correct jet holders for each gas type.
References
- dscappliances.com
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Fisher & Paykel HVAC Parts - Select From 16 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>