Miele WEK365 Heat Pump Dryer Instruction Manual

: July 4, 2024
: Miele

Miele WEK365 Heat Pump Dryer

Miele-WEK365-Heat-Pump-Dryer-image

Specifications

Model: Heat-pump dryer
Language: en-GB
M.-Nr.: 12 119 680

Product Information

The heat-pump dryer is designed to efficiently dry clothes while being environmentally friendly. It includes features such as a heat exchanger and a refrigerant that is safe for the ozone layer.

Installation:

Transport the tumble dryer carefully to its installation site to avoid damage.
Follow the detailed installation instructions provided in the manual.
After setting up the tumble dryer, wait for at least one hour before starting a drying programme to prevent damage to the heat pump.

Caring for the Environment:

Dispose of the packaging material responsibly by using material-specific collection points for recycling. Contact your Miele dealer for assistance in disposing of the packaging material.
When disposing of the old appliance, ensure that it is done in an authorized, environmentally friendly manner to prevent any hazards to human health and the environment.

Warnings and Safety Instructions:

Read all instructions carefully to prevent accidents or damage to the appliance.
Avoid naked flames or sparks if the tumble dryer is damaged due to its flammable and explosive refrigerant (R290).
If the tumble dryer is damaged, disconnect it from the electrical supply, air the room, and contact Miele Customer Service Department immediately.

FAQs

Q: Can I alter the tumble dryer?
- A: Do not make any alterations to the tumble dryer. Follow the instructions provided in the Installation and Technical data section of the manual.

Operating instructions Heat-pump dryer

To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

en-GB

M.-Nr. 12 119 680

Caring for the environment

Disposing of the packaging material
The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Recycling the packaging material reduces the use of raw materials. Use material-specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away.

with Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged to remove any old batteries which are not securely enclosed by the appliance and to remove any lamps without destroying them, where this is possible. These must be taken to a suitable collection point where they can be handed in free of charge. Please ensure that your old appliance poses no risk to children while being stored for disposal.

Disposing of your old appliance
Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety. These could be hazardous to human health and to the environment if disposed of with household waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with household waste.

Take care not to damage your tumble dryer’s pipework and heat exchanger before or during disposal in an authorised, environmentally friendly manner. This is to ensure that coolant in the tumble dryer and oil in the compressor is contained, and will not leak into the environment. Instead, please make use of officially designated collection and disposal points to dispose of and recycle electrical and electronic appliances in your local community, with your dealer or 6

Warnings and safety instructions

It is essential to read these instructions.
This tumble dryer contains a refrigerant that is flammable and explosive. This tumble dryer complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the tumble dryer. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the tumble dryer. In accordance with standard IEC 60335-1, Miele expressly and strongly advises that you read and follow the instructions in the chapter on installing the tumble dryer as well as the safety instructions and warnings. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner. Correct application This tumble dryer is intended for use in domestic households and similar working and residential environments. This tumble dryer is not intended for outdoor use.
7

Warnings and safety instructions
It must be used only as a domestic appliance to dry items which have been washed in a water solution and which are marked on the manufacturer’s care label as being suitable for tumble drying. If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. This tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation. Safety with children Children under 8 years of age must be kept away from the tumble dryer unless they are constantly supervised. Children 8 years and older may only use the tumble dryer unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the tumble dryer unsupervised. Please supervise children in the vicinity of the tumble dryer and do not let them play with it. Technical safety Before setting up the tumble dryer, check it for any externally visible damage. Do not install or use a damaged tumble dryer. Before connecting the tumble dryer, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.
8

Warnings and safety instructions
Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of BS OHSAS 180012 ISO 45001. The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). Do not connect the appliance to the mains electricity supply by an extension lead, multi-socket adapter or similar. These can overheat and are a fire hazard. If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger. Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty. Faulty components must only be replaced by genuine Miele original spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used. The tumble dryer must be isolated from the electricity supply in the event of a fault and during cleaning and maintenance. This tumble dryer must not be used in a non- stationary location (e.g. on a ship). Do not make any alterations to the tumble dryer, unless authorised to do so by Miele.
9

Warnings and safety instructions
This tumble dryer is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or the Miele Service Department. This tumble dryer uses a gaseous refrigerant which is condensed by the compressor. Having been increased to a high temperature level as as result of the condensing process, the refrigerant passes through a closed refrigerant circuit. The heat generated is transferred to the drying air as flows through the heat exchanger. – The humming noises caused by the heat pump during the drying
process are normal. They do not impair the efficient functioning of the tumble dryer. – The refrigerant is environmentally friendly and causes no damage to the ozone layer. Damage to the tumble dryer by switching it on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying programme.
The R290 refrigerant contained in this tumble dryer is flammable and explosive. If the tumble dryer is damaged, proceed as follows: – Avoid naked flames or anything which creates a spark. – Disconnect the tumble dryer from the electrical supply. – Air the room where the tumble dryer is located. – Contact the Miele Customer Service Department.
Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive if it leaks. Take measures to protect the tumble dryer against damage. Do not make any alterations to the tumble dryer. Follow the instructions in “Installation” and “Technical data”.
10

Warnings and safety instructions
The accessibility of the plug must always be ensured, in order to disconnect the tumble dryer from the mains. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the dryer. Make sure the dryer door can be opened without hindrance after installation. Correct use The maximum load for this tumble dryer is 9.0 kg (dry weight). The maximum recommended loads for individual programmes are given in the Programme chart. To prevent the risk of fire, do not connect the tumble dryer via a controllable socket (e.g. a timer or a peak-load switch-off device). If the drying programme is interrupted before the end of the cooling down phase, this could cause the laundry to self-ignite. Warning: Do not switch the dryer off before the drying programme has finished. If this is done, the laundry must be hung up or spread out to cool it down. Fabric conditioner and similar products must be used according to the instructions on the manufacturer’s packaging. Remove all items from pockets (e.g. lighters, matches). The fluff filters must be cleaned after every drying cycle. The fluff filters or the plinth filter must be thoroughly dried after cleaning. Wet fluff/plinth filters could cause operational faults while drying.
11

Warnings and safety instructions
To prevent the risk of fire, textiles that have not been cleaned thoroughly or are still soiled with deposits of any kind must not be dried in this tumble dryer. This applies in particular to textiles that – have not been washed. – have not been thoroughly cleaned and are still soiled with grease,
oil or other deposits (such as cooking oils, cosmetics, lotions, etc.). If items have not been thoroughly cleaned, there is a danger that they might ignite when heated, even after they have been removed from the tumble dryer at the end of the programme. – have been treated with inflammable cleaning agents or which contain residues of acetone, alcohol, benzene, petrol, kerosene, stain remover, turpentine, wax and wax remover or other chemicals (e.g. mops and floor cloths). – items that have been splashed with hair lacquer, hair spray, nail varnish remover or similar substances. When washing such heavily soiled items: ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. To prevent the risk of fire, these textiles must not be tumble dried: – textiles that have been cleaned using chemicals (e.g. professional dry-cleaning agents) – textiles which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling. – textiles containing padding or fillings which are damaged (e.g. pillows, jackets). The filling could fall out and cause a risk of fire. The heat pump that is essential to the operation of this tumble dryer generates a great deal of heat inside its casing. There must be a reliable means of dissipating this heat. Otherwise loads could take longer to dry or the tumble dryer might sustain damage in the long term.
12

Warnings and safety instructions
The following mandatory requirements must be met: – permanent room ventilation from the beginning to the end of every
drying programme – a gap between the floor and the bottom of the tumble dryer (this
must not be blocked or obstructed in any way) The tumble dryer must not be hosed down. Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up. In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self-igniting). The programme is not finished until the cooling down phase has been completed. As soon as the programme has finished, remove all laundry from the drum. Always close the door after use. This way you will avoid the danger of: – Children climbing onto or into the dryer or hiding things in it. – Pets or other small animals climbing into it. The tumble dryer must not be used without fluff filters or – with damaged fluff filters, or – with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault. Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses. If the water is drained externally through the drain hose instead of being collected in the condensed water container, make sure the drain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage. Condensed water is not drinking water. It can cause health problems in both people and animals if consumed.
13

Warnings and safety instructions
Always keep the area around the tumble dryer free of dust and fluff. Dust drawn into the tumble dryer can cause blockages in the heat exchanger over time. Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that you always keep the flacon, or the fluff filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place down on any surface. Use an absorbent cloth to wipe up any fragrance which has leaked out of the flacon onto the floor, the dryer or any dryer components (e.g. the fluff filter) immediately. If fragrance which has leaked out of a flacon: comes into contact with the skin – wash the skin thoroughly with soap and water; comes in contact with the eyes – rinse the eyes with clean water for at least 15 minutes; is swallowed – rinse out the mouth thoroughly with clean water. Seek medical advice in the case of contact with the eyes or if fragrance has been swallowed. If fragrance which has leaked out of a flacon comes in contact with clothing, change the clothing immediately. Wash the clothing or any cloths used for mopping up fragrance thoroughly with plenty of water and detergent. There is the risk of fire or damage to the tumble dryer if the following instructions are not observed: – Never refill a flacon with fragrance. – Never use a faulty fragrance flacon. Dispose of an empty fragrance flacon with the household waste and never use it for any other purpose. Please also observe the information supplied with the fragrance flacon.
14

Warnings and safety instructions Accessories
Only use genuine Miele original spare parts and accessories with this appliance. If non-Miele parts are used, warranty, performance and product liability claims will be invalidated. The tumble dryer can be combined with a Miele washing machine in a washer-dryer stack. The appropriate “WTV” stacking kit (available to order) to match your tumble dryer and washing machine is required. If you order a plinth for this tumble dryer (available from Miele as an optional accessory – depending on country), make sure it is the correct one. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your tumble dryer.
Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
15

Operating the tumble dryer

Control panel

a Control field The control field consists of various sensor controls, a time display and indicator lights.
b Sensor controls for drying levels After selecting a drying level programme with the programme selector, the recommended drying level lights up. The drying levels that can be selected for the corresponding programme are dimly lit.
c Indicator lights (These light up when necessary.) Empty the condensate container.

e PerfectDry indicator flashes after the programme has started and switches off when the running time is displayed. PerfectDry measures the residual moisture of the laundry. In programmes with selectable drying levels, PerfectDry dries the laundry precisely, although the result is also influenced by the calcium content of the water. lights up towards the end of the programme once the selected drying level has been reached, except in the case of the Woollens handcare, Warm air/DryFresh programmes.

Clean the fluff and plinth filters. d DryCare40 sensor control
Cares for temperature-sensitive textiles.

16

Operating the tumble dryer

f Time display After the programme has started, the programme running time will appear on the display in hours and minutes. When Delay start is being used, the programme running time will appear after the Delay start period has elapsed. With most programmes, the running time displayed may vary or “jump”. The following factors, among others, affect the programme running time displayed: the quantity of laundry, the type of fabric and the residual moisture in the laundry. The electronic module adapts to these factors with increasing accuracy.
g Start/Add laundry sensor control Touching the Start/Add laundry sensor control starts a programme. The current programme can be interrupted to add laundry. The programme can be started when the sensor control is flashing on and off. The sensor control lights up constantly once the programme has started.

h Sensor controls for the Delay start function or the Time Dry/DryFresh programme running time

After touching the

sensor control, a later

start time for the pro-

gramme (Delay start) can

be selected. Once selec-

ted, lights up brightly.

The or sensor con-

trols are used for select-

ing the duration of the

Delay start period or the

duration of the Warm air/

DryFresh programme.

i Optical interface This is used by the Customer Service Department as a transmission point.

j Programme selector for selecting programmes and for switching off the appliance. The tumble dryer is switched on by selecting a programme and switched off by turning the programme selector to the position. If the tumble dryer is connected to the WiFi network, you will have access to the following alternative options for selecting programmes.

MobileStart You can operate your tumble dryer remotely with the Miele app.

Wash2Dry A drying programme tailored to the laundry is set in conjunction with the connected washing machine.

17

Operating the tumble dryer
How the sensor controls work
The , , and sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected. If a sensor control is dimly lit, this means it can be selected.
18

Before using for the first time

Installation
Before using the appliance for the first time, check that you have followed all the instructions under “Installation”. Read these operating instructions, paying particular attention to the information provided under “Installation”.
Removing the protective foil and stickers Remove: – Any protective film from the door – Any stickers from the front and the lid
Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Downtime after installation
Damage to the tumble dryer by
switching it on too soon. This can damage the heat pump. After setting up the tumble dryer wait for at least one hour before switching it on.

Information about networking
Miele@home
Your tumble dryer is equipped with an integrated WiFi module.
In order to use it you need: – a WiFi network – the Miele app – a Miele user account. The user ac-
count can be created via the Miele app. The Miele app will guide you as you connect your tumble dryer to your home WiFi network. Once your tumble dryer is connected to your WiFi network you can use the app, for example, to carry the following activities: – Controlling your tumble dryer remotely – Calling up information on the operating status of your tumble dryer – Calling up information on the programme sequence of your tumble dryer Connecting your tumble dryer to your WiFi network will increase energy consumption, even when the tumble dryer is switched off.
Before installing the tumble dryer in its final location, ensure the signal strength is sufficient for your WiFi network.

19

Before using for the first time

Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed. Miele@home availability The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country. For information about availability, please visit www.miele.com. Miele App The Miele App is available to download free of charge from the Apple App Store® or from the Google Play StoreTM.
Wash2Dry Once the programme has come to a proper end, the Miele washing machine transfers the programme data via the router to which the networked tumble dryer is also connected, as well as transferring it to the Miele Cloud. The tumble dryer automatically sets a drying programme tailored to the laundry based on the transferred programme data.

All you need to do is start the drying programme once you have loaded the tumble dryer. No further programme settings are required on the tumble dryer. Tip: The drying programme must be started within 24 hours of the end of the wash programme. The data will be kept available for the tumble dryer during this period, but will be overwritten when a new wash programme ends. Tip: Do not disconnect the tumble dryer from the network. The programme data transferred by the washing machine will be received by the tumble dryer as soon as you select Wash2Dry. If you have disconnected the appliance from the network beforehand, this will cause a delay in receiving the data. In order to use the Wash2Dry function, the Miele washing machine and tumble dryer must be networked using Miele@home services.
Tip: Set up Miele@home as described in these operating instructions.
Setting up Miele@home
There are 2 ways of connecting: 1. Via the Miele app (default) 2. Via WPS
To do so, you will need a WPS-compatible router.
Logging in via the Miele app The Miele app can be used to connect to your network.

20

Before using for the first time
You can then load the dryer and select a programme as described in “3. Select a programme and start it”.
Turn the programme selector to MobileStart .
appears on the time display and the timeout starts to count down from 10 minutes. The Miele app will guide you through the remaining steps. When you have successfully connected, will appear on the time display. Logging in via WPS Turn the programme selector to Mo-
bileStart . Touch the sensor control until
appears on the time display and a short keypad tone sounds. The timeout then starts to count down from 2 minutes on the time display. Activate the WPS function on your router within 2 minutes. When you have successfully connected, will appear on the time display. Tip: If the connection has not been set up when the timeout has finished counting down, repeat the process.
Follow the procedure for using for the first time outlined in these instructions
Read “1. Notes on correct laundry care” and “2. Load the tumble dryer”.
21

Energy saving tips

This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily.
– Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e.g. approx. 20% energy can be saved if spun at 1600 rpm instead of 1000 rpm.
– Load according to the optimum amount of laundry recommended for the programme being used. This will mean that the energy consumption for the amount of laundry is at its most economical.
– Make sure that the room temperature is not too high. If there are other heat producing appliances in the room in which the dryer is located, make sure the room is well ventilated and switch the other appliances off, if possible.
– Clean the fluff filters in the door opening after every drying cycle.
Please refer to “Cleaning and care” for information on cleaning the fluff filters and the plinth filter.

– If possible, make use of time-variable, low-cost electricity tariffs. Ask your energy supplier for information. Your tumble dryer’s delay start function will be useful as you can select when during the next 24 hours you want drying to start automatically.

22

1. Notes on correct laundry care

Points to note regarding washed laundry
– When washing very heavily soiled items ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times.
– Do not put soaking wet items into the tumble dryer. Make sure your laundry is thoroughly spun before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
– New dark coloured garments should be washed and dried separately from light coloured garments to avoid the danger of colours running and discolouring other garments or even plastic components in the dryer. Dark coloured fibres can also settle on light coloured garments and vice versa.
– Starched laundry can be dried in the tumble dryer. To achieve the usual finish, double the amount of starch should be used.
Preparing the laundry before drying
Damage due to foreign objects
which were not removed from the laundry. Foreign objects can melt, burn, or explode. Ensure that any foreign objects, e.g. detergent dispensing balls, lighters, etc. have been removed from the laundry.

Risk of fire due to incorrect use
and operation. The laundry can burn and destroy the dryer and the surroundings. See “Warning and Safety” instructions for further information.
– Sort the laundry according to the type of fibre and weave, size, garment care label symbol and the drying level required.
– Check seams and stitching to ensure that padding and linings are intact. This way you will avoid the danger of fillings coming out. These could catch fire when being dried.
– Disentangle the laundry. – Tie together textile belts and ties. – Fasten duvet covers and pillow cases
to prevent small items from being rolled up inside them. – Fasten hooks and eyes. – Leave jackets open and undo any long zips so that textiles dry evenly. – Sew in or remove underwiring from bras. – If necessary, reduce the size of the load for these types of fabric. Easy care fabric tends to crease more, the larger the load. This is particularly the case for garments made from very fine weave fabric, such as shirts or blouses.

23

1. Notes on correct laundry care

Drying
Tip: Read the “Programme chart”, which contains a complete list of data for programmes and load sizes. – Always observe the maximum recom-
mended load size for each programme. This will mean that the energy consumption for the amount of laundry is at its most economical. – Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the Woollens handcare programme for these textiles. – Pure linen should only be tumble dried if it is specified as suitable on the care label. The surface of the fabric may otherwise become rough. Only use the Woollens handcare programme for these textiles. – Woollens and wool blends are susceptible to becoming matted or shrinking. Only use the Woollens handcare programme for these textiles. – Jersey fabrics (e.g. T-shirts, underwear) tend to shrink when they are washed for the first time. To prevent further shrinking, do not overdry jersey fabrics. Buy jersey garments that are slightly bigger than the size you would normally wear if possible. – Reduce the load size for fabrics that are particularly heat- sensitive or susceptible to creasing. Also select the DryCare 40 Extra.

Care symbols

Drying

Temperature

Normal or higher

Reduced*

Do not tumble dry

Recommendation: select DryCare 40

Ironing

Temperature
hot, medium, lower Do not iron

The right drying level
– HygieneDry for special hygiene requirements
– Extra dry for multi-layered and very thick fabrics
– Normal for textiles that can shrink. Or for light cotton or jersey textiles
– Hand iron if you want to iron the laundry after drying, for example
Tip: You can alter the drying levels (to be damper or drier) for the Cottons and Minimum iron programmes. See “Programmable functions” for more information.

24

Loading the laundry
Preventing damage to fabrics. Before loading the dryer, read “1. Notes on correct laundry care”.

2. Load the tumble dryer
Checking the FragranceDos socket If you are not using a fragrance flacon, check that the 2 FragranceDos sockets are closed. The “Fragrance flacon” chapter describes how to use the fragrance flacon.

Open the door. Remove any items that have been left
inside the drum. Unfold the laundry and load loosely
into the drum.
Do not overload the drum. Doing so will cause unnecessary wear and tear to the laundry and affect the drying result. It is also likely to cause more creasing.

Push the tab down completely (see arrow) so that the socket is closed. Otherwise, fluff will accumulate here.
Close the door

Laundry items may be damaged if they get trapped by the door.

Shut the door with a gentle swing.

25

Select a programme and start it

Switching on the tumble dryer
The tumble dryer is switched on by selecting a programme, and switched off by turning the programme selector to the position.
Turn the programme selector to a programme.
Selecting a programme
There are 3 possible ways to select a programme: 1. Selecting drying programmes using the programme selector Turn the programme selector to the
required programme. A drying level may also light up and durations will appear in the time display. 2. Selecting drying programmes via the MobileStart programme selector position Turn the programme selector to Mo-
bileStart . will light up on the time display. Touch the Start/Add laundry sensor
control. The tumble dryer can now be operated via a mobile device together with the Miele app.

3. Selecting a drying programme via the Wash2Dry programme selector position Once the wash process has ended,
place the clean laundry in the tumble dryer. Turn the programme selector to Wash2Dry . If the connection is successful, … … will flash in the display . Once the washing machine programme has come to a proper end, the finish time and drying level will be displayed on the tumble dryer. To start the programme, all you need to do is press the Start/Add laundry sensor control on the tumble dryer.
Programme changeover is not available on this tumble dryer after washing delicate textiles (e.g. curtains) in special wash programmes.
Readouts on the time display: …… Dryer starting query Programme cannot be
changed over on dryer or dryer waiting for data Dryer not connected

26

3. Select a programme and start it

Selecting programme settings
Selecting the drying level Check the “Programme chart” to see which programme you can select a drying level for and which drying level meets your requirements.

– The programme completes the normal drying process for laundry care first. The finish time counts down to 0 minutes. Then the temperature holding time starts.
– At the start of the temperature holding time, the remaining programme running time is extended by 85 minutes to produce a hygienic drying result.
A programme for which the HygieneDry drying level has been selected should not be interrupted, as this would prevent the micro-organisms from being killed off. Do not cancel the drying programme.

Touch the sensor control for the drying level you want.
The selected drying level lights up brightly.
HygieneDry drying level Tip: The HygieneDry drying level can be selected for some programmes. Specific hygiene requirements for robust garments with the care symbol are met. HygieneDry dries items at a temperature that is constant over an extended period of time (extended temperature holding time). This kills off micro-organisms (such as germs or dust mites) and reduces allergens in the laundry. Tip: Reduce the load size for the corresponding programme to half the maximum load size specified in these operating instructions. Temperature holding time – An estimated programme running
time is displayed at the start of a programme for which the HygieneDry drying level has been selected.

27

3. Select a programme and start it

Selecting the programme running time for Time Dry/DryFresh The programme running time can be selected in 10-minute increments. The programme running time can be between minutes and up to
hours.

Touch the or sensor control repeatedly until the required programme running time appears on the time display.

Selecting DryCare 40 It can be used for all fabrics that are free of wool and are washable at temperatures of 40 °C and above.
This option dries fabrics gently at very low temperature.
For the best possible drying result: Reduce the load size for the corresponding programme to half the maximum load size specified in these operating instructions. Exceptions: you must reduce programmes with a maximum load size of 9 kg to 4 kg.
Touch the DryCare 40 sensor control. It then lights up brightly.
– DryCare 40 can be selected with the following programmes: Cottons Minimum iron Shirts Warm air/DryFresh
– DryCare 40 is always activated/cannot be deselected with Delicates.
DryCare 40 is not available for all drying levels.

28

3. Select a programme and start it

Starting a programme
Touch the flashing Start/Add laundry sensor control.
The Start/Add laundry sensor control lights up. Programme sequence – If Delay start has been selected, the
Delay start time will start to count down first. – The programme starts.
– The PerfectDry indicator will only flash/light up for programmes with selectable drying levels (see also “Operating the tumble dryer”).
– The tumble dryer measures the residual moisture of the laundry and calculates the required programme running time accordingly. If you barely place anything inside the tumble dryer or load it with dry laundry, this will be sensed by the empty drum detection feature. The automatic load recognition function will restrict the running time of the selected programme once it has started. The fabrics will be gently dried or aired. In this case, the PerfectDry indicator does not light up at the end of the programme.

Touch the Start/Add laundry sensor control to switch the indicators on again (this does not have any effect on a running programme).
Adding laundry You can add laundry items after the programme has started. Follow the description in “Changing
the programme sequence Adding or removing laundry”.

To prevent laundry wearing out avoid overdrying it.

– Before the programme finishes, the laundry is cooled.

Energy savings After 10 minutes, the indicators dim. The Start/Add laundry sensor control flashes slowly.

29

4. Remove the laundry

End of programme/Anti-crease
End of programme: lights up in the time display and the Start/Add laundry sensor control goes out. A buzzer sounds. Or in some cases bars flash in the time display ( … … …) The end of the programme is followed by the anti-crease phase, which will run for up to 2 hours. There is no anticrease phase at the end of the Woollens handcare programme. See “Programmable functions”, ” Anti- crease”. The tumble dryer switches off automatically.
Unloading the drum
Only open the door when the drying process has finished. Otherwise, the laundry will not be properly dried through and cooled down.
Reach under the door grip and pull the door open.

Items left in the dryer could be damaged by overdrying when the dryer is used the next time. Always remove all items from the drum.
Turn the programme selector to the position.
Remove the fluff from the 2 fluff filters in the door opening: see “Cleaning and care – Fluff filters”.
Shut the door with a gentle swing. Empty the condensed water con-
tainer. We recommend that you drain the condensed water externally through the drain hose when drying a full load using the Cottons and Cottons programmes. This will avoid having to empty the condensed water container during the programme.
Drum lighting
When you open the door of the tumble dryer, the drum is illuminated along with the area immediately in front of the dryer. This prevents you from accidentally leaving behind any items in the drum or in your laundry basket. The drum lighting will go out automatically to save energy.

Remove the laundry. 30

Delay start/SmartStart

Selecting the Delay start function
With Delay start, you can delay the start of a programme from minutes up to (hours). Delay start cannot be used with the Warm air/DryFresh programme. Start by selecting a programme with
programme settings.

Touch the sensor control. The sensor control lights up brightly. Touch the or sensor control re-
peatedly until the required Delay start time appears in the time display. The time will count upwards or downwards automatically if you touch the or sensor controls continuously.

Starting Delay start
Touch the Start/Add laundry sensor control to start the Delay start function.
– Delay start times of more than will count down in hours and then in minutes until the start of the programme.
– With a longer delay start time, the drum will rotate occasionally to untangle the laundry. This is not a fault.
Altering Delay start If you would like to alter the Delay start function after starting a programme, the function must be cancelled first. Turn the programme selector to the
position. The tumble dryer is switched off and Delay start is cancelled. Select a programme. Select a Delay start time.
Adding laundry during ongoing timer period Follow the description in “Changing
the programme sequence Adding or removing laundry”.

31

Delay start/SmartStart

Smart Start

The SmartStart function lets you define a time period during which your tumble dryer will start automatically. The appliance will start on receipt of a signal, e.g. from your energy supplier, that indicates that the electricity tariff is particularly economical. This function is active when the SmartGrid programmable function is activated
The time period can be defined between 30 minutes and 24 hours. During this period, the tumble dryer waits for the signal from the energy supplier. If no signal is sent during the defined period, the tumble dryer starts the drying programme.

Setting the time period
If the SmartGrid programmable function is activated, the function of the sensor control changes. The time display no longer shows the Delay start period, and instead shows the time period in which your tumble dryer can be started automatically.
The procedure for setting this is the same as for setting the time for Delay start. Touch the sensor control. Set the time period you want using
the or sensor controls. Touch the Start/Add laundry sensor
control. A flashing readout appears in the time display for the duration: … . The period can be ended by opening the door.

32

Programme chart

All weights marked with * are based on the weight of dry laundry.

Cottons

max. 9 kg*

Use for

Cotton items such as those described under Cottons Normal with normal residual moisture.

Note

– Items are dried to a Normal level only in this programme.

– The Cottons programme is the most energy-efficient for drying cotton items with normal residual moisture levels.

Note for – The Cottons programme is the test programme in accord-

test insti- ance with Regulation 392/2012/EU for energy labelling, measured

tutes

in accordance with EN 61121.

– With the Cottons and Cottons programme settings, drain the condensed water externally through the drain hose.

33

Programme chart

Cottons

max. 9 kg*

HygieneDry

Use for

– Cottons and linen fabric which will be in direct contact with the skin, e.g. underwear, baby clothes, bed linen, towelling

– Other hard-wearing items with specific hygiene requirements

Tip

Use for special hygiene requirements.

Extra dry, Normal

Use for

Single and multi-layered cotton items, e.g. T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes and flannelette/bed linen

Tip

– Select Extra dry for multi-layered and very thick fabrics.

– Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear, baby clothes) because they can shrink.

Hand iron

Use for

All cotton or linen fabrics requiring further processing, e.g. table linen, bed linen or starched laundry.

Minimum iron

max. 4 kg*

HygieneDry, Normal, Hand iron

Use for

Minimum iron fabrics made of synthetic, cotton or mixed fibre, e.g. workwear, overalls, pullovers, dresses, trousers and table linen.

Tip

Use HygieneDry for special hygiene requirements.

Delicates

max. 2.5 kg*

Normal, Hand iron

Use for

Delicate items with the symbol on the care label made of synthetic fibre, mixed fibre, rayon, and easy care cotton. For example, shirts, blouses, lingerie, and appliquéd garments.

Tip

The load should be reduced further for a particularly crease-free dry-

ing process.

34

Programme chart

Woollens handcare

max. 2 kg*

Use for

Woollen garments and fabric containing wool blends, e.g. pullovers, cardigans, tights.

Note

– Wool and wool blend items are only fluffed up; they are not dried completely.

– Remove the garments as soon as the programme has finished.

Bed linen

max. 4 kg*

HygieneDry, Extra dry, Normal, Hand iron

Use for Bed linen, pillowcases, cushion covers

Tip

Use HygieneDry for special hygiene requirements.

MobileStart

The Miele app is used for selecting programmes and operating the appliance.

Wash2Dry

The programme is selected automatically in conjunction with the programme selection on the connected washing machine.

Express

max. 4 kg*

Extra dry, Normal, Hand iron

Use for Garments with the symbol suitable for the Cottons programme.

Note

The programme running time is shorter.

Shirts

max. 2 kg*

Normal, Hand iron

Use for All shirts and blouses.

35

Programme chart

Proofing

max. 2.5 kg*

Use for

Fabrics suitable for tumble drying, e.g. microfibre fabrics; skiwear; outdoor clothing; fine, close-weave cotton garments (poplin); and tablecloths.

Note

– With this programme, items can only be dried to the Normal level.

– This programme includes an additional proofing fixing phase.

– Only use proofing agents which are stated by the manufacturer as being “suitable for use on membrane fabrics”. These agents contain fluorochemical compounds.

– Do not dry fabrics which have been treated with proofing agents containing paraffin. This poses a fire hazard.

Warm air/DryFresh

max. 9 kg*

Note

– For drying fabrics (Warm air)

– For freshening up fabrics (DryFresh)1

– Do not select the longest drying time to start with. Check the items as you are drying them to find the optimum time.

Use for

– Airing: multi-layered fabrics whose layers have different drying characteristics, e.g. jackets, pillows, sleeping bags and other bulky items

– Drying: individual items, e.g. bath towels, swimwear and tea towels

– Freshening up: clean fabrics1

1 Tip

You can reduce or eliminate unwanted odours in clean, dry fabrics. To

do this, use Warm air/DryFresh in conjunction with the DryFresh

flacon (optional accessory2). Select a time of at least 60 minutes and

reduce the load size in order to freshen up the textiles effectively.

2 Insert fragrance flacon and set the intensity: see “Fragrance flacon”

36

Changing the programme sequence

Changing a programme once it has started
It is no longer possible to change the selected programme. This is to prevent the operation of the machine being tampered with. If you adjust the programme selector, the symbol will light up in the time display. The symbol goes out when you select the original programme.
Cancelling the current programme Turn the programme selector to the
position. The programme is cancelled. You can now select a new programme.

Adding or removing laundry
You have forgotten something but the programme is already running. Touch the Start/Add laundry sensor
control. The word Add will appear in the time display. The Start/Add laundry sensor control flashes slowly. Open the door. Add or remove laundry items. You can still change the programme selection. Close the door. Touch the Start/Add laundry sensor
control. The programme continues.
Exceptions when adding laundry
In some cases for example, during the cooling phase or the Proofing programme it is not possible to add laundry items.
In these cases, the word Add is not displayed. In exceptional cases, the door can be opened while the programme is running.

37

Condensed water container

Emptying the condensed water container
The condensed water is collected in the condensed water container.

Empty the condensed water container after every drying programme.

The indicator will light up if the maximum level of the condensed water container is reached. To delete the indicator: open and close the door with the dryer switched on.
Damage to the door and the fas-
cia panel when removing the condensed water container. The door and the fascia panel can sustain damage. Always close the door completely.

Empty the condensed water container.
Replace the condensed water container in the dryer.
Condensed water can cause health problems in people and animals. Do not drink condensed water.
Condensed water can be put to household use (e.g. used in a steam iron or humidifier). To ensure that any residual particles of fluff in the condensed water are removed before use, pass it through a fine sieve or paper filter first.

Remove the condensed water container.
To prevent water from running out, keep it in a horizontal position when carrying it. Hold the condensed water container by the front panel and at the back.
38

Fragrance flacon

FragranceDos
Fragrance flacons (optional accessories) can be used to give your laundry a pleasant scent. This dryer has 2 places for inserting fragrance flacons. This gives you a choice of how to use them.
– You can use both positions if you wish to change from one scent to another. You can close the fragrance flacon that you are not using.
– Use both positions if you want a more intense scent of the same fragrance. Or if you wish to conveniently switch between a scent for normal laundry and DryFresh to freshen up your laundry.
– Use one socket only if you only want to use the one fragrance.
Risk of fire and damage to health
if fragrance flacons are used incorrectly. The leaked fragrance can damage your health if it comes into contact with your body. Leaked fragrance can cause fire. Before using a fragrance flacon, please read “Warnings and safety notes”, “Using the fragrance flacon (optional accessory)”.

Removing the protective seal from the fragrance flacon
Only hold the fragrance flacon as illustrated. Do not hold it at an angle or tip it, as the fragrance will leak out of it. Take the fragrance flacon out of its packaging. Do not attempt to open the fragrance flacon.
Hold the fragrance flacon securely so that you do not open it by mistake.
Pull off the protective seal.

39

Fragrance flacon
Inserting the fragrance flacon
Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter. They can be fitted on the left and the right hand side next the opener.
Insert the fragrance flacon into the socket as far as it will go.

Markers and must line up with one another.

Open the cover using the tab until the tab is right at the top as shown.

To prevent the accumulation of fluff, the cover of the unused socket must remain closed. Push the tab of the cover to the bottom (see arrow), until you hear it click into position.

40

Turn the outer ring clockwise a little.
The fragrance flacon can slip out. Turn the outer ring in such a way that markers and line up.
Opening the fragrance flacon
Before drying, you can select the intensity of the fragrance.

Fragrance flacon

Turn the outer ring counter-clockwise until marker b is in position _.
If you wish to dry without the fragrance occasionally: remove the fragrance flacon and store it in its original packaging.

Turn the outer ring clockwise: the further you open the fragrance flacon, the more intense the fragrance.
Damp laundry and longer drying durations with sufficient heat transfer are needed for the fragrance to be released into the laundry effectively. The fragrance will also be noticeable in the room air during the process.
Closing the fragrance flacon
After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly.

Replace the fragrance flacon with a new one when the intensity of the fragrance is no longer sufficient.

41

Fragrance flacon
Removing/replacing the fragrance flacon

Turn the outer ring counter-clockwise until markers a and b line up.

Fragrance can leak. Do not lay the fragrance flacon down.

Replace the fragrance flacon with a new one.
When not in use, you can store the fragrance flacon in its original packaging. Fragrance flacons are available to order from Miele or online at www.mieleshop.com.

– If you are keeping the fragrance flacon in its original packaging, do not store the packaging upright on its edge or upside down. Otherwise, the fragrance will leak out.
– Always store in a cool, dry place away from direct sunlight.
– When purchasing new fragrance flacons, only remove the protective seal just before use.

42

Cleaning and care

Fluff filters
This tumble dryer has 2 fluff filters in the loading area of the door. Both fluff filters trap fluff produced during the drying process.

Clean the fluff filters after each drying programme. This avoids having to extend the programme running time. Also clean the fluff filters when the indicator light comes on.

To make the indicator light go out, open and close the door while the tumble dryer is switched on.

Remove the fluff (see arrows).

Removing the fragrance flacon The intensity of the fragrance will be diminished if the fluff filters and the plinth filter are not cleaned. Remove the fragrance flacon. See
“Fragrance flacon”, “Removing/replacing the fragrance flacon”.

Removing visible fluff Tip: You can also use a vacuum cleaner so that you can remove the fluff without touching it. Open the door.

Pull the upper fluff filter forwards to remove it. 43

Cleaning and care

Remove the fluff from the filter surface of all the fluff filters and the perforated laundry deflector.
Push the upper fluff filter back into position until it clicks.
Close the door.
Cleaning the fluff filters and air flow openings thoroughly
If the drying duration has become longer or the surface of the filters is visibly compacted with fluff, you should carry out the following cleaning procedure.
Remove the fragrance flacon. See “Fragrance flacon”.
Pull the upper fluff filter forwards to remove it.

Turn the yellow dial on the lower fluff filter in the direction of the arrow (until it reaches the stop position).
Hold the dial and pull the fluff filter forwards to remove it.

44

Cleaning and care
Use a vacuum cleaner with a long crevice nozzle attached to remove any visible fluff from the upper air flow openings.
Finally, clean the fluff filters with water. Cleaning the fluff filters with water Wipe the smooth plastic surfaces of
the fluff filters with a damp cloth to clean them. Flush the filters through under warm running water. Shake the fluff filters thoroughly and then dry them carefully. Ensure the filters are dry before replacing them. Wet filters could cause operational faults. Push the lower fluff filter in completely and lock it with the yellow dial. Push the upper fluff filter in completely. Close the door.
45

Cleaning and care
Cleaning the plinth filter
Clean the plinth filter whenever the indicator light comes on or when the programme running time seems to be taking longer than usual. To make the indicator light go out,
open and close the door while the tumble dryer is switched on. Removing the plinth filter
Pull the plinth filter out by the handle. The right-hand guide pin comes out when the plinth filter is removed. The guide pin prevents the access panel from closing without the plinth filter. Cleaning the plinth filter
Press the round, indented area on the heat exchanger access panel to open it.
The panel will spring open.
Pull the handle out of the plinth filter. Clean the plinth filter carefully and
thoroughly under running water.
46

Cleaning and care

Tip: To speed up the removal of residue from the surface, run a water jet vertically over the front of the plinth filter. Squeeze the plinth filter very carefully
several times as you rinse it. Rinse the entire plinth filter thor-
oughly until all visible residue has been removed. Continue to carefully squeeze the plinth filter until all of the water has been removed.
Tip: To soak up water, place the damp plinth filter between 2 hand towels. On an even surface, gently press down on the plinth filter with the back of your hand. This will dry the plinth filter more quickly.
The plinth filter must not be fitted dripping wet. Otherwise, this could cause a fault. Carefully squeeze the water out of the plinth filter.

If a drying programme is interrupted with a fault message after the clean plinth filter has been fitted, the plinth filter was too wet when it was fitted. Carefully squeeze the water out of the plinth filter again. Leave the plinth filter to air-dry. If a fault occurs again despite this, it may be caused by stubborn residue from washing substances. Reactivate the plinth filter in the washing machine. See “Problem solving guide Reactivating the plinth filter”.
Blockages caused by a damaged
or worn filter. The heat exchanger becomes blocked and damage may occur. Check the plinth filter following the instructions provided in “Problem solving guide Replacing the plinth filter”. Replace the plinth filter if necessary.
Use a damp cloth to remove any fluff from the handle.
Fit the plinth filter back on the handle. Make sure it is the correct way round.

47

Cleaning and care
Push the plinth filter in completely. This will push in the right-hand guide pin at the same time.
48

Cleaning and care

Cleaning the plinth filter access panel

Cleaning the dryer
Disconnect the tumble dryer from the electrical supply.

Damage due to the use of unsuit-
able care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all-purpose cleaners.

Use a damp cloth to remove any fluff. Make sure that you do not damage the rubber seal when doing this.
Close the heat exchanger access panel.
Damage or ineffective drying if
drying takes place without a plinth filter or when the heat exchanger access panel is open. An excessive accumulation of fluff can damage the tumble dryer. If the system is not leak-tight, this can make drying ineffective. Only operate the tumble dryer with the plinth filter fitted and the heat exchanger access panel closed.

Clean the tumble dryer and the seal on the inside of the door with a slightly damp soft cloth and a mild solution of washing-up liquid and water.
Dry all parts with a soft cloth.

49

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily remedied. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.

Indicator lights or information on the time display triggered when a programme is cancelled

Problem

Cause and remedy

The indicator light comes on after a programme has been cancelled and a signal sounds.

The condensed water container is full or there is kink in the drain hose.
To switch off the indicator light, open and close the door (with the tumble dryer switched on).
Empty the condensed water container. Check the drain hose. See “Cleaning and care”.

and another number No obvious cause.

combination flash after a Switch the dryer off and then on again.

programme has been cancelled, a signal sounds

Start a programme. If the programme is cancelled again and an error message appears, there is a fault. Contact the Miele Ser-

vice Department.

: lights up and the programme has been cancelled, a signal sounds

The laundry is unevenly distributed or has rolled up.
Disentangle the laundry and remove a few items, if necessary.
Switch the dryer off and then on again. Start a programme.

50

Problem solving guide

Problem and flash, a signal sounds. The indicator light comes on.

Cause and remedy
The system has been clogged by fluff or detergent residue. To deactivate the message, turn the programme se-
lector to the position. Clean the fluff filters and the plinth filter.
Please see “Cleaning and care” for notes on cleaning.
If the fluff filters and the plinth filter are damaged or out of shape, or if they cannot be cleaned, they must be replaced.
If the fault message is displayed again after cleaning, this could be due to one of the causes listed below.
The plinth filter was too wet when it was fitted. Carefully squeeze the water out of the plinth filter. Leave the plinth filter to air-dry.
There is still underlying residue in the plinth filter that could not be removed. Check the plinth filter. Follow the instructions in
“Problem solving guide Replacing the plinth filter”. If the plinth filter is not damaged or out of shape,
you can reactivate it in a washing machine. Follow the instructions in “Problem solving guide Reactivating the plinth filter”.
The heat exchanger is clogged. Check the heat exchanger. Follow the instructions in
“Problem solving guide Checking the heat exchanger”.

51

Problem solving guide

Indicator lights or information on the time display

Problem The indicator light comes on at the end of the programme.

Cause and remedy
The tumble dryer is not working correctly or economically. Possible causes could be clogging caused by fluff or detergent residue. To switch off the indicator light, open and close
the door (with the tumble dryer switched on). Please see “Cleaning and care” for notes on clean-
ing. Clean the fluff filters. Also check the plinth filter and clean it if necessary.

lights up
Bars flash in the display at the end of a programme: ……… Lines flash and light up after switching on: . Programme selection is not possible. lit and programme start is not possible. lights up lights up lights up lights up

You can influence when the indicator lights up. To do this, follow the instructions in “Programmable
functions Airways indicator”. The programme selector has been moved. Select the original programme. The time remaining
will appear in the display again. The programme has finished but the laundry has not yet cooled down. Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down during the cooling phase. The PIN code is activated. See “Programmable functions”, ” PIN code”.
An update is available for the tumble dryer. See “Programmable functions RemoteUpdate” for more information. This is not a fault. The tumble dryer is connected to the network. This is not a fault. The remote control function is switched off. See “Programmable functions”. This is not a fault. The tumble dryer is connected to the network. This is not a fault. The tumble dryer is not connected to the network. See “Programmable functions”.

52

Problem solving guide

Unsatisfactory drying results

Problem

Cause and remedy

The DryCare 40 Extra is not drying the laundry sufficiently.

The room where the tumble dryer is located is too warm. This has caused the DryCare process to finish prematurely.
Ventilate the room thoroughly. To fully dry the laundry, select Warm air with the
DryCare 40 Extra.

The laundry is not sufficiently dry.

The load consisted of different types of fabric. Finish drying using the Warm air programme. Select a more suitable programme next time.
Useful tip: You can alter the drying levels for some programmes. See “Programmable functions”, sections ” Drying levels Cottons” and ” Drying levels Minimum iron”.

Laundry or feather filled The laundry was washed with insufficient detergent pillows smell after drying Feathers are a natural product and this is quite normal.
Laundry: use sufficient detergent next time. Pillows: take out of the tumble dryer and air them. Use a fragrance flacon (available as an optional ac-
cessory) for your favourite fragrance.

Items made of synthetic fibres are charged with static electricity after drying

Synthetic fibres tend to attract static charge. Static charge can be reduced by adding a fabric con-
ditioner to the final rinse in the washing programme.

There is a build-up of fluff

Fluff is principally the result of friction when garments are being worn and to some extent when they are being washed. Machine drying hardly causes any fluff to form.

Fluff is collected by the fluff filters and the plinth filter and can be removed easily. See “Cleaning and care”.

53

Problem solving guide

The drying cycle duration is very long

Problem The drying process goes on too long or even switches off.*

Cause and remedy
The room where the tumble dryer is located is too warm. Ventilate the room thoroughly.

Detergent residues, hair and fine fluff can clog the filters.
Clean the fluff filters and the plinth filter. Remove visible fluff from the heat exchanger.

The laundry is unevenly distributed or has rolled up.
The drum is too full. Disentangle the laundry and remove a few items. Start a programme.

The bottom right grille is blocked. Move any objects, such as a laundry basket, away
from the dryer.

The laundry is too damp. Spin using a higher spin speed in the washing ma-
chine.

Metallic components, e.g. zips, have prevented the tumble dryer from registering the correct laundry moisture level.
Open any zips next time. If the problem recurs, dry these items using the
Warm air/DryFresh programme.

Switch the tumble dryer off and on again before starting a new programme.

54

Problem solving guide

Installation

Front view

a Mains connection cable b Control panel c Condensed water container d Door

e Plinth filter flap f 4 height-adjustable feet g Cooling air grille h Drain hose for condensed water

62

INSTALLATION
Rear view

Installation

a Protruding lid for holding when moving the appliance
b Drain hose for condensed water c Hook for winding up the mains con-
nection cable during transport d Mains connection cable
Transporting the tumble dryer
Danger of injury to people and
damage to property caused by moving the appliance incorrectly. If the tumble dryer tips up there is a danger of injury to people and damage to property. Ensure that the tumble dryer is stable during transportation.

If the tumble dryer is being transported on its side, it must be tipped onto its left or right side.
If the tumble dryer is being transported upright and you are using a hand truck, you must transport it with its left or right side resting on the truck.
Transporting the tumble dryer to its installation site
Make sure the fixings at the back
of the lid are secure. Otherwise there is a danger of the lid being pulled off when carrying the appliance. Before carrying the appliance check that the lid is secure where it protrudes at the back of the appliance.
Carry the tumble dryer by the front feet and by the lid where it protrudes at the back of the appliance.

63

INSTALLATION

Installation

Installation
Levelling the tumble dryer Ensure that no closeable door, sliding door or oppositely hinged door is installed that could hinder opening of the tumble dryer door in any way.
To ensure proper operation, the tumble dryer must stand perfectly level. The screw feet on the tumble dryer can be adjusted to compensate for unevenness in the floor.

Risk of fire and explosion due to
damage to the tumble dryer. The refrigerant is flammable and explosive. Do not make any alterations to the tumble dryer. Take measures to protect the tumble dryer against damage.
If the tumble dryer is damaged, proceed as follows: – Avoid naked flames or anything which
creates a spark. – Disconnect the tumble dryer from the
electrical supply. – Air the room where the tumble dryer
is located. – Contact the Miele Customer Service
Department.
Downtime after installation
Damage to the tumble dryer by
switching it on too soon. This can damage the heat pump. After setting up the tumble dryer wait for at least one hour before switching it on.

Turn the screw feet by hand or with a flat open spanner.
64

INSTALLATION

Installation

Ventilation The cool air intake at the front of the tumble dryer must not be blocked or covered. This would hinder a sufficient intake of cool air for the heat exchanger.
Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the tumble dryer. The hot air that is blown out from the heat exchanger warms the room air. Ensure sufficient ventilation of the room: e.g., open the window. The drying time will otherwise take longer (higher energy requirement).

The heat pump that is essential to the operation of this tumble dryer generates a great deal of heat inside its casing. There must be a reliable means of dissipating this heat. Otherwise loads could take longer to dry or the tumble dryer might sustain damage in the long term. Permanent room ventilation during every drying programme and the gap between the bottom of the tumble dryer and the floor are mandatory requirements at all times.
Before moving the tumble dryer again A small quantity of condensed water that remains in the area around the pump after the drying process can run out if the tumble dryer is tilted. Recommendation: start a programme for approx. 1 minute before transporting the dryer. Any remaining condensed water will then be fed into the condensed water container (which you will need to empty again) or out through the drain hose.

65

INSTALLATION

Installation

Additional installation requirements
Risk of injury from an electrical
shock when the appliance lid is removed. There is a risk of electric shock because electrically charged components in the dryer are accessible with the lid removed. For safety reasons, the tumble dryer must be disconnected from the electricity supply.
Building under a continuous worktop or in a cabinet
Appliance defect due to a build-up of heat. Make sure there is adequate room for warm air from the dryer to be directed away.
– The electrical socket must be located in an accessible position near the tumble dryer.
– Drying durations may increase slightly. Avoid a build-up of heat: – Adjust the screw feet so that there is
a gap of at least 20 mm between the floor and the bottom of the dryer. – Create a gap for the dryer in the kitchen furniture plinth facing. – Create ventilation gaps in the kitchen cabinet. Slot-in This tumble dryer is suitable for pushing under a worktop if there is space to do this without removing the lid.

Optional accessories
Building-under kit A building under kit is required if the lid of the tumble dryer needs to be removed in order to build it under a worktop. It must be installed/dismantled by a suitably qualified fitter.
The cover plate included in the buildingunder kit replaces the appliance’s lid. The cover plate has to be fitted for electrical safety! Fitting instructions are supplied with the building-under kit.
Washer-dryer stack The tumble dryer can be combined with a Miele washing machine in a washerdryer stack. The appropriate Miele washer-dryer stacking kit is required.
Plinth The tumble dryer can be fitted on a plinth with drawer (please note the plinth may not be available in all countries).

66

INSTALLATION

Installation

External condensed water outlet
Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose at the back of the dryer. This means that the condensed water container no longer has to be emptied. Drain hose length: 1.49 m Max. delivery head: 1.00 m Max. drain hose length: 4.00 m Drainage accessories
– Supplied: Adapter (b), Hose clip (c), Hose holder (e);
– Available to purchase: “Non-return valve” kit for connection to an external water connection. Non-return valve (d), Hose extension (a) and Hose clips (c) are supplied.

Installation conditions requiring a nonreturn valve
Danger of condensed water
back-flow. Water could flow back into the tumble dryer or be drawn into it. Back-flow water could damage the tumble dryer and also the room in which it is located. The non-return valve should be used if the end of the hose is immersed in water, or if other water connections are installed.
Maximum delivery head with non-return valve fitted: 1.00 m Installation conditions requiring the fitting of a non-return valve: – Drainage into a sink or floor gully
where the end of the hose is immersed in water. – Connection to a sink drain outlet. – Connection to a drainage system already in use by another appliance, e.g. a dishwasher or washing machine.
If the non-return valve is incorrectly fitted the appliance will not drain. The non-return valve has to be fitted with the arrow on it pointing in the direction of flow.
Arranging the drain hose
Damage to the drain hose
through incorrect handling. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked.

67

INSTALLATION

Installation

There will be a small amount of residual water left in the drain hose. Have a container ready to collect this.

Examples
Drainage into a sink or floor gully Use the hose holder to secure the drain hose.

Pull the drain hose off its connection (light arrow).
Pull the hose out of the holders (dark arrow) and unwind it.
Allow any residual water to run into a container.

Water damage.
Should the end of the hose come loose, overflowing water can cause damage. Secure the drain hose carefully (e.g., by tying it) to make sure it cannot slip.
The non-return valve can be fitted in the end of the hose.

68

INSTALLATION

Installation

Direct connection to a sink drain outlet Use the hose holder, the adapter, the hose clips and the non-return valve (available to purchase).

Fit adapter 1 to the sink drain outlet using nut 2. The nut is usually fitted with a washer which must be removed.
Attach the end of the hose 4 to adapter 1.
Use the hose holder. Use a screwdriver to tighten hose clip
3 up close to the nut. Fit non-return valve 5 to tumble dryer
drain hose 6.
Non-return valve 5 has to be fitted so that the arrow points in the direction of flow (i.e. towards the sink).
Secure the non-return valve using hose clips.

1. Adapter 2. Nut 3. Hose clip 4. End of the hose (secured with the
hose holder) 5. Non-return valve 6. Tumble dryer drain hose

69

INSTALLATION

Installation

Electrical connection
The tumble dryer is supplied with a mains cable with moulded plug ready for connection to a suitable earthed socket. The socket must be easily accessible after the tumble dryer has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole.
Risk of fire from overheating.
Connecting the tumble dryer to a multi-socket adapter or to an extension lead can overload the mains connection cable. For safety reasons, do not use an extension cable or multi-socket adapter.
The electrical system must comply with local and national safety regulations (BS 7671 in the UK). For safety reasons, we recommend using a type A residual current device (RCD) in the relevant electrical installation for connecting the tumble dryer. If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service Department.

These operating instructions and the data plate indicate the nominal power consumption and the appropriate fuse rating. Compare this information with the data of the on-site electrical connection. If in any doubt, consult a qualified electrician. Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of BS OHSAS 180012 ISO 45001.

70

Technical data

Height Width Depth Depth with door open Height for building under Width for building under Depth for building under Suitable for pushing under a worktop Suitable for stacking Weight Drum volume Load size Capacity of condensed water container Hose length Maximum delivery head Maximum drain hose length Length of connection cable Voltage Connected load Fuse rating Test certificates awarded Energy consumption LEDs

850 mm 596 mm 636 mm 1054 mm 820 mm (+8/-2 mm) 600 mm 600 mm Yes Yes Approx. 62 kg 120 litres 9.0 kg (weight of dry laundry) 4.8 litres 1.49 m 1.00 m 4.00 m 2.00 m See data plate See data plate See data plate See data plate See “Consumption data” Class 1

Frequency band Maximum transmission power

2.4000 GHz 2.4835 GHz < 100 mW

71

Technical data

Data sheet for household tumble driers
In acc. with delegated regulation (EU) No. 392/2012

MIELE

Model name/identifier

TEH 785 WP

Rated capacity1

9,0 kg

Type of tumble drier (Air-vented / condenser)

– /

Energy efficiency class

A+++ (most efficient) to D (least efficient)

A+++

Weighted annual energy consumption (AEc)2 Tumble drier (Automatic / non- automatic)

185 kWh/year / –

Energy consumption of the standard cotton programme

Energy consumption at full load

1,55 kWh

Energy consumption at partial load

0,84 kWh

Weighted power consumption in off-mode (Po) Weighted power consumption in the left-on mode (Pl) Duration of the ‘left-on’ mode (Tl)3 Standard programme to which the information in the label and the fiche relates4

0,20 W 0,20 W 15 min Cottons with arrow

Programme time of the ‘standard cotton programme’

Weighted programme time

141 min

Programme time at full load

184 min

Programme time at partial load

108 min

Condensation efficiency class5

A (most efficient) to G (least efficient)

A

Weighted condensation efficiency for the ‘standard cotton programme’ at full 94 % and partial load

Average condensation efficiency of the ‘standard cotton programme’ at full 94 % load

Average condensation efficiency of the ‘standard cotton programme’ at par- 94 % tial load

Sound power level (LWA)6 Built-in

64 dB(A) re 1 pW –

Yes, standard feature 1 In kg of cotton laundry for the standard cotton programme at full load.
2 based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
3 If the household tumble drier is equipped with a power management system.
4 This programme is suitable for drying normal wet cotton laundry and is the most efficient programme in terms of energy consumption for cotton.
5 If the household tumble drier is a condenser tumble drier.
72

Technical data
6 For the standard cotton programme at full load.
EU Conformity declaration
Miele hereby declares that this heat-pump tumble dryer complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: – Products, Download from www.miele.ie – For service, information, operating instructions etc: go to https://miele.co.uk/
manuals and enter the name of the product or the serial number
UK Conformity declaration
Miele hereby declares that this heat-pump tumble dryer complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: – Products, Download from www.miele.co.uk – For service, information, operating instructions etc: go to https://miele.co.uk/
manuals and enter the name of the product or the serial number
This Statement of Compliance confirms this Miele product fully complies with the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.

Household Appliance Tumble Dryer HT28, HT30-W 2) Manufactured by: Miele & Cie KG,
Carl Miele Street 29, 33332 Gutersloh Germany Imported by and contact point: Miele Company Ltd, Fairacres, Marcham Road, Abingdon, Oxon, OX14 ITW Great Britain 3) The defined support period at the time of first supply is 10 years
To report vulnerabilities and cybersecurity issues please contact: psirt@miele.com
Signature Name: Paul Wright Company Position: Head of Technical Management Date of signature: 19th March 2024 Place of signature: Abingdon, Oxfordshire
73

Consumption data

Load size1

Final spin speed in washing machine

Residual moisture

Energy

Programme running
time

kg

rpm

%

kWh

min

Cottons2

9.0

1000

60

1.55

184

4.5

1000

60

0.84

108

Cottons Normal

9.0

1200

53

1.40

166

9.0

1400

50

1.30

158

9.0

1600

44

1.15

141

Cottons Hand iron

9.0

1000

60

1.14

137

9.0

1200

53

1.00

120

9.0

1400

50

0.95

112

9.0

1600

44

0.80

95

Minimum iron Normal

4.0

1200

40

0.45

66

Delicates Normal

2.5

800

50

0.41

70

Woollens handcare

2.0

1000

50

0.02

5

Shirts Normal

2.0

600

60

0.44

62

Express Normal

4.0

1000

60

0.75

100

Proofing Normal

2.5

800

50

0.75

100

1 Weight of dry laundry

2 Test programme in accordance with Regulation 392/2012/EU for energy labelling, measured in accordance with EN 61121.

All data was calculated using EN 61121 unless otherwise stated.

Consumption data can vary from the nominal values given above depending on the size of the load, types of textiles, residual moisture levels after spinning and fluctuations in the electricity supply, or when water hardness levels differ from specified values.

74

Programmable functions

Programming
You can use the programmable functions to alter the dryer’s electronics to suit your requirements.
Programming is carried out by following these steps (, , … ) using the sensor controls.
Accessing the programming level Before starting – Make sure that the programme se-
lector is turned to any of the programme settings. – Make sure that the door of the tumble dryer is open. Touch the Start/Add laundry sensor control and hold it down whilst carrying out steps . Close the tumble dryer door. Wait until the Start/Add laundry sensor control, which will now be flashing quickly, lights up constantly … … and then release the Start/Add laundry sensor control. will light up in the time display.

Choosing and selecting a programmable function The number of the programmable function will appear in the time display as and a number: e.g. . Touch the or sensor control to
scroll to the next or previous programmable function:
Programmable function Cottons drying levels Minimum iron drying levels Cooling down temperature Buzzer volume Keypad tone PIN code Conductivity Control field switch-off beha-
viour Memory Anti-crease Buzzer active Airways indicator Display brightness dimmed RemoteUpdate Remote control * SmartGrid Factory default

only visible after networking

75

Programmable functions

Confirm the selected programmable function by touching the Start/Add laundry sensor control.

Editing and saving a programmable function You can either switch a programmable function on/off or select different options. The programmable function option will appear in the time display as and a number: e.g. . Touch the or sensor control to
switch the programmable function on/off or to select an option:

Programmable function

Available options

X X XX X X

XXXX

to

X

X X

X

X X

X

X X X

XX X X X X

X

X X
X = can be selected, = factory default
Confirm the chosen selection with the Start/Add laundry sensor control.
The number of the programmable function (e.g. ) will then light up again. Exiting programming level Turn the programme selector to the
position. The settings you have selected are now stored in the memory. You can alter the settings again at any time.

76

Programmable functions

Cottons drying levels
You can adjust the drying levels for the Cottons programme to one of 7 different levels.
Options
= Even damper = Damper = A little damper = Factory setting = A little drier = Drier = Even drier
Exception: The Cottons programme will remain unchanged.
Minimum iron drying levels
You can adjust the drying levels for the Minimum iron programme to one of 7 different levels.
Options
= Even damper = Damper = A little damper = Factory setting = A little drier = Drier = Even drier

Cool-down temperature
The laundry will be cooled to 55 °C before the end of the programme. It can be cooled to a lower temperature, but this will prolong the cooling phase.
The value is set in increments of 1 °C.
= Factory default 55 °C = 54 °C = 53 °C = 52 °C = 51 °C = 50 °C = 49 °C = 48 °C = 47 °C = 46 °C = 45 °C = 44 °C = 43 °C = 42 °C = 41 °C = 40 °C

77

Programmable functions

Buzzer volume
The buzzer volume can be changed.
= Quieter = Factory default setting
Keypad tone
The buzzer that sounds when a sensor control is pressed can be changed or switched off. Selection = Off = Factory default setting = Louder

Lock code
The code prevents your dryer being used without your knowledge.
When the code has been activated, you have to enter the code after switching the dryer on. Otherwise the dryer cannot be operated. Options
= Off (factory setting) = On
If the option has been selected, after switching on you will have to enter the code before you can operate the dryer.
Using the tumble dryer when the PIN code is activated After the tumble dryer is switched on, will flash in the time display. The PIN code is ; it cannot be altered. Touch the sensor control until a
flashes in the first position. Confirm with the Start/Add laundry
sensor control. Enter the two other numbers in the
same way. The tumble dryer is ready for use after has been entered and confirmed.

78

Programmable functions

Conductivity
This programmable function should only be altered if the water is so soft that it is likely to cause the electronics which sense residual moisture in the laundry to give false readings. Options
= Off (factory setting) = Low Important This programmable function should only be set if the water used for washing the laundry is extremely soft with a conductivity reading (electrical conductivity) of less than 150 S/cm. Contact your local water authority for the conductivity level of your mains water supply. Make sure that you only activate for the condition described above. Otherwise, drying results can be unsatisfactory.

Control field standby status
To save energy, the time display and sensor controls will go out once the programme has been running for 10 minutes. In this case, the Start/Add laundry sensor control flashes slowly.
However, there is no switch-off in the event of a fault. Options
= Off The time display and sensor controls do not go out.
= On (factory default setting) The time display and sensor controls will go out once the programme has been running for 10 minutes.
“Switching on” the display again – Touch the Start/Add laundry sensor
control. This will not affect a running programme.

79

Programmable functions

Memory
You can set the following: the electronic module will save the drying level and any options selected for the current drying programme. It will also save the duration of the Warm air/DryFresh programme. When the programme is selected again, these saved settings will appear in the display. Options = Off (factory default setting) = On Exception: The Cottons programme will remain unchanged.
Anti-crease
The drum will continue to rotate in a special anti-crease rhythm for a maximum of 2 hours after the end of the drying process. This helps prevent creasing if laundry is not going to be removed immediately. You can reduce the duration of the anti-crease phase. Options = no Anti-crease = 1 hour = 2 hours (default setting)

Buzzer is active
The buzzer sounds to let you know the programme has finished. It can be switched on or off.
The continuous tone which sounds when there are error messages is independent of the buzzer. Options
= Off = On (factory setting)

80

Programmable functions

Airways indicator
Fluff should be removed after drying. In addition, this indicator will remind you to clean the filters when a certain amount of fluff has collected in them: You can decide at what level of fluff this reminder should be given.
You will have an idea of how often this should be done after a few drying programmes. Options
= Off does not light up. However, if there is a very severe blockage in the ducting, the programme will be cancelled and the error message will appear in the display regardless of this option.
= Heavy lights up when there is a heavy build-up of fluff.
= Normal (factory default setting) = Light
lights up when there is only a small build-up of fluff.

Backlight brightness dimmed
The brightness of the dimmed sensors in the control field can be set to one of seven different levels. The brightness changes as soon as you select a different setting. Selection = Darkest level = Factory default setting
… = Brightest level
Factory default
The programmable functions are reset to the factory default settings.
= The factory default is set = Reset the programmable func-
tions to the factory default settings

81

Programmable functions

Networking
The , and programmable functions are only displayed if the requirements for using Miele@home have been met (see “Miele@home” and “Before using for the first time”).
Switching off WiFi
The network configuration should be reset whenever a tumble dryer is being disposed of or sold, or if a used tumble dryer is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the tumble dryer.
Turn the programme selector to MobileStart .
will light up on the time display of the tumble dryer. Touch the sensor control on the
tumble dryer and hold the sensor control until the countdown on the time display has finished. appears on the time display. – The WiFi is switched off. – The WiFi connection will be reset to the factory default setting. A new connection setup has to be carried out in order to use Miele@home again.

RemoteUpdate The RemoteUpdate function is used for updating the software in your tumble dryer. If an update is available for your tumble dryer, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. If you do not install an update, you can continue to use your tumble dryer in the usual way. However, Miele recommends installing updates.
Running RemoteUpdate
Information about the content and scope of an update will be provided in the Miele app.
The message will appear on the time display if an update is available. You can install the update immediately or postpone this until later. When the tumble dryer is switched on again, you will be reminded about the update. Deactivate RemoteUpdate if you do not want to install any updates.
The update may take several minutes.
Please note the following information about the RemoteUpdate function: – You will only receive a message when
an update is available. – Once an update has been installed, it
cannot be undone. – Do not switch off the tumble dryer
during an update. Otherwise, the update will be aborted and will not be installed. – Some software updates can only be carried out by the Miele Customer Service Department.

82

Programmable functions

Activating/deactivating The RemoteUpdate function is activated as standard. Available updates will be downloaded automatically but will only be installed if you initiate installation manually. Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically. Options
= Off = On (factory default setting)

Postponing the update After the tumble dryer is switched on, appears on the time display. Touch the sensor control. The next time you switch on the appliance, you will be prompted to start the update again.

Starting the update After the tumble dryer is switched on, appears on the time display. Touch the Start/Add laundry sensor
control.
starts to flash on the time display. The update starts. Bars on the time display show the progress of the update: = 0 % = 100 %

83

Programmable functions

Remote control
You can use the Miele app to check the status of your tumble dryer from anywhere and start it remotely. You can also control it remotely via the MobileStart programme.
Remote control is automatically activated when you connect the tumble dryer to the WiFi network. You can switch off remote control if you do not want to operate the tumble dryer with your mobile device. A programme can be cancelled via the app even if this programmable function is switched off. Use the button to set a timeframe during which you wish to start the tumble dryer and start the Delay start. The tumble dryer will then start within the timeframe specified when it receives your signal. If it has not received a start signal by the latest start time set, the tumble dryer will start automatically. Options
= Off = On (factory default setting)

SmartGrid
You can set your tumble dryer to start automatically based on an external signal within a certain time period.
If you have activated SmartGrid, the sensor control will have the new “SmartStart” function rather than the “Delay start” function. Use the sensor control to set a SmartStart time period. The tumble dryer will then start within the time period specified by you when it receives an external signal. If an external signal has not been received by the latest start time set, the tumble dryer will start automatically (see the “Delay start” chapter). Options
= Off (factory default setting) = On

84

Copyrights and licences for the communication module
For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licensing terms. These items of software/software components are protected by copyright. The copyrights held by Miele and third parties must be respected. Furthermore, this communication module contains software components which are distributed under open source licence conditions. The open source components contained in the appliance along with the corresponding copyright notices, copies of the licensing terms valid at the time, and any further information can be accessed locally via IP using a web browser (http:/// Licenses). The liability and warranty arrangements for the open source licences displayed in this location only apply in relation to the respective rights holders.

Programmable functions

85

United Kingdom
Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk

Australia

Ireland

South Africa

Miele Australia Pty. Ltd.

Miele Ireland Ltd.

Miele (Pty) Ltd.

ACN 005 635 398

2024 Bianconi Avenue

63 Peter Place, Bryanston 2194

ABN 96 005 635 398

Citywest Business Campus

P.O. Box 69434, Bryanston 2021

Level 4, 141 Camberwell Road

Dublin 24

Tel: (011) 875 9000

Hawthorn East, VIC 3123

Tel: (01) 461 07 10

Fax: (011) 875 9035

Tel: 1300 464 353

Fax: (01) 461 07 97

E-mail: info@miele.co.za

E-mail: info@miele.com.au

E-mail: info@miele.ie

Internet: www.miele.co.za

Internet: www.miele.com.au

Internet: www.miele.ie

China Mainland

Malaysia

Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing’ an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.cn Internet: www.miele.cn

Miele Sdn Bhd Suite 12-2, Level 12 Menara Sapura Kencana Petroleum Solaris Dutamas No. 1 Jalan Dutamas 1 50480 Kuala Lumpur, Malaysia Phone: +603-6209-0288 Fax: +603-6205-3768

Thailand Miele Appliances Ltd. BHIRAJ TOWER at EmQuartier 43rd Floor Unit 4301-4303 689 Sukhumvit Road North Klongton Sub-District Vadhana District Bangkok 10110, Thailand
United Arab Emirates Miele Appliances Ltd.

Hong Kong, China
Miele (Hong Kong) Ltd. 41/F – 4101, Manhattan Place 23 Wang Tai Road Kowloon Bay, Hong Kong Tel: (852) 2610 1025 Fax: (852) 3579 1404 E-mail: customerservices@miele.com.hk Website: www.miele.hk

New Zealand

Showroom 1, Eiffel 1 Building

Miele New Zealand Limited IRD 98 463 631 8 College Hill Freemans Bay, Auckland 1011 Tel: 0800 464 353 E-mail: customercare@miele.co.nz

Sheikh Zayed Road, Umm Al Sheif P.O. Box 114782 – Dubai Tel. +971 4 3044 999 Fax. +971 4 3418 852 800-MIELE (64353) E-mail: info@miele.ae

Internet: www.miele.co.nz

Website: www.miele.ae

Singapore Miele Pte. Ltd.

India

29 Media Circle

Miele India Pvt. Ltd.