JIACHEN AJ001 Music Baseball Instruction Manual
- July 4, 2024
- JIACHEN
Table of Contents
JIACHEN AJ001 Music Baseball
Product Information
Specifications
- Output power: RMS 3W THD=10% 70MA
- Frequency response: 150-18000 HZ
- Signal-to-noise ratio: 80DB
- Speaker unit size: 1.77 inches (45mm) Anti-magnetism, 5W
- Battery: 503035-500MAH
Product Usage Instructions
Pairing the Bluetooth Speaker
To pair the Bluetooth speaker:
- Hold the power button for 2 seconds to power on the device.
- The speaker is now ready for pairing.
- On your mobile phone, go to the Bluetooth settings page and search for the Bluetooth device name AJ001.
- Click on the device name to connect.
- When the speaker is connected, the colourful light will turn on and dance together with the music.
Charging
The speaker charges using a USB Type-C interface with 5V input:
- While charging, the indicator shows a red colour.
- Once fully charged, the indicator changes to a blue colour.
FAQ
- Q: What should I do if the Bluetooth speaker is not connecting to my device?
- A: If the speaker is not connecting, try the following steps:
- Ensure the speaker is in pairing mode.
- Check if the Bluetooth on your device is turned on.
- Restart both the speaker and your device.
- Forget the device from your Bluetooth settings and try pairing again.
- Q: How long does it take to fully charge the speaker?
- A: The charging time may vary but typically it takes about X hours to fully charge the speaker depending on the battery level.
Manual
- This music Baseball can play music, take you a lots enjoyment whiling sporting.
- Assembled with an upgraded Bluetooth device, plays music at any time and anywhere.
- New technology micro Aluminum diaphragm, high clear Treble, and enough Bass make the sound quality performance more outstanding.
- Wide connection range, It fits iPhones, laptops and other mobile devices.
- Lithium battery, computer USB, adapter, DC-5V four type power supply methods, It is very convenient.
- It has 8 LED dazzling color lights. The beat is accompanied with the rhythm of the music.
Speaker function parameters
- Output power: RMS 3W THD=10% 70MA
- Frequency response: 150- -18000 HZ
- Signal-to-noise ratio: 80DB
- Speaker unit size:1.77 inches (45mm ) Antimagnetism, 5 Ω, 5 W
Tips
Pair the bluetooth speaker, and hold the power button 2 s to power on the device. And the speaker is ready for paring. Find the bluetooth setting page on your mobile phone search for the bluetooth device name AJ001 and click connect. When the speaker is connected the colorful light will on and dance together with the music.
Charge : USB_Type-C interface, 5V， It shows a red colour while charging, and turns to a blue colour finish .
| Items | Specificatio n | Remark |
|---|---|---|
| Operate | Button | |
| Charging | Charger 5V/1A | |
| Interface | Type-c | |
| Current | 500mA±20mA | |
| Battery | 503035-500MAH |
FCC STATEMENT
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used under the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.