Telenco MMEB Modular Multi Enclosure Bracket Installation Guide
- July 4, 2024
- Telenco
Table of Contents
Telenco MMEB Modular Multi-Enclosure Bracket
Product Specifications
- Model: MMEB2, MMEB3, AMEP
- Maximum Number of Enclosures: Up to 2 (MMEB2), Up to 3 (MMEB3)
- Weight: 0.9kg (MMEB2), 1.2kg (MMEB3), 0.337kg (AMEP)
- Package Contents: 7 units (MMEB2), 5 units (MMEB3), 8 units (AMEP)
- Package Dimensions: 40 x 30 x 30cm (MMEB2, MMEB3), 40 x 30 x 20cm (AMEP)
- Package Weight: 6.5kg (MMEB2), 6.2kg (MMEB3), 3kg (AMEP)
Product Usage Instructions
- Installation of Support Plate on Wooden Poles
- Wooden pole with nails: Fix the support plate using a minimum of two nails bonding with a galvanized washer in the slots provided.
- Wooden pole with screws: Fix the support plate using a minimum of two screws in the slots provided.
- Installation of Support Plate on Metallic or Composite Pole with Stainless Steel Band
- Metallic pole: Follow specific instructions for fixing the support plate on metallic poles.
- Composite pole: Follow specific instructions for fixing the support plate on composite poles.
Installation of Enclosure Support
- Detach the fixing pins from the enclosure supports (6 pins for 2 enclosures, 8 pins for 3 enclosures).
- Place each enclosure support on the support plate, observing the mounting direction. Secure them by inserting the fixing pins.
- MMEB2: Secure the two enclosure brackets with the fixing pins. Installation completed.
- MMEB3: Add a third enclosure bracket. Secure it with 4 fixing pins. Installation completed.
- Remove the two central fixing pins and open the two support plates.
- Detach two fixing pins from the additional enclosure support.
- Insert the third enclosure support. Secure it with 4 fixing pins. Installation completed.
Frequently Asked Questions
Q: Can I install more than the maximum specified number of enclosures on this bracket?
A: No, the maximum number of enclosures specified is the recommended limit for safe and proper usage of the bracket.
Q: Can I use this bracket for poles with a diameter larger than the specified dimensions?
A: It is recommended to use this bracket within the specified package dimensions for optimal performance and safety.
PARTS
LEGEND
- Support plate
- Enclosure support
- Fixing pin
- The Telenco® MMEB is a support kit for mounting one to three enclosures on poles or in manholes.
- Its triangular design considerably reduces the space required for enclosures on the network.
- Its support plate can be installed on any type of pole or MOBRA arm for deployment in a manhole. Its enclosure plate has a large number of threads to accommodate a wide range of enclosures.
- The modularity of the Telenco® MMEB makes it easy to go from 2 to 3 enclosure supports by using an additional multi-enclosure plate (AMEP) or vice versa as the life of the network evolves.
- The fixing pins ensure a secure hold and easy handling.
PN| MODEL| MAXIMUM NUMBER OF ENCLOSURE| WEIGHT|
PACKAGE| PACKAGE DIMENSIONS| PACKAGE WEIGHT
---|---|---|---|---|---|---
1001714| MMEB2| Up to 2| 0.9kg| 7 units| 40 x 30 x 30cm| 6.5kg
1001715| MMEB3| Up to 3| 1.2kg| 5 units| 40 x 30 x 30cm| 6.2kg
1001716| AMEP| Add 1 (only for MMEB2)| 0.337kg| 8 units| 40 x 30 x 20cm| 3kg
CASE OF USE
- Overhead network:
- Fixing with screws rails or stainless steel bands on poles
- Underground network:
- On MOBRA arm
INSTALLATION OF SUPPORT PLATE ON WOODEN POLES
Wooden pole with nails
- Fix the support plate using a minimum of two nails bonding with a galvanized washer in the slots provided.
- Material required:
- Nail bonding : 3x60mm
- Washer galvanized: 5x16mm
- Hammer
- Wooden pole with screws
- Fix the support plate using a minimum of two screws in the slots provided.
- Material required:
- Wood screw: 4.5x50mm
- Washer galvanized: 5x16mm
- Screwdrivers
INSTALLATION OF SUPPORT PLATE ON METALLIC OR COMPOSITE POLE WITH STAINLESS STEEL BAND
- Metallic pole
- Material required:
- Stainless steel band with buckles
- Banding tool
- Composite pole
INSTALLATION OF ENCLOSURE SUPPORT
- Detach the fixing pins from the enclosure supports (6 pins for 2 enclosures, 8 pins for 3 enclosures).
- Place each enclosure support on the support plate, observing the mounting direction. Secure them by inserting the fixing pins.
- MMEB 2: Secure the two enclosure brackets with the fixing pins.
- Installation completed
- MMEB 3: You can add a third enclosure bracket. Secure it with 4 fixing pins.
- Installation completed
ADDITION OF AN ENCLOSURE SUPPORT X– MMEB2 TO MMEB3
Material required: Plier 160mm
- Remove the two central fixing pins and open the two support plates.
- Detach two fixing pins from the additional enclosure support.
- Insert the third enclosure support. Secure it with 4 fixing pins.
- Installation completed
Developing tomorrow’s networks, todaywww.telenco.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>